SE316-T ADVANTECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

16 port, SNMP , Modbus/TCP Model SE316-T

  • Communicates with HMI/SCADA software via Modbus/TCP
  • Integrated with iView2 - SNMP Management Software (free download)
  • Energy Efficient Ethernet (EEE), IEEE 802.3az for low energy consumption
  • Wide temperature range -40 to 75°C
  • DIN rail or wall/panel mountable
  • Redundant dual 12 to 48VDC power inputs
  • EMS Level 3 Protection
  • Designed for hazardous locations: UL C1D2, ATEX Zone 2 (pending), IECEx (pending)
  • Port-based QoS feature for deterministic data transmission
  • Loop detection and event alarm
  • Power failure indicated by a relay and LED indicator Features & Benefits SE316-T_2016 Specifications COMMUNICATIONS LAN 10/100Base-T(X) Transmission Distance Up to 100 meters Transmission Speed 100 Mbps INTERFACE Connectors 16 x RJ45 6-pin removable screw terminal (power & relay) Ethernet Ethernet, Auto Sensing, 10/100BaseTX, Duplex and MDIX LED Indicators P1, P2, P-Fail, Loop Detection 10/100T (X): Link/Activity, Speed SE316-T Introduction SE300 series is the industry’s first design for Ethernet Green®, IEEE802.3az - Energy Ethernet switches that cut power usage by up to 60%, significantly saving energy usage in the field and reducing total cost of ownership over 24/7. Advantech B+B SmartWorx SE300 series monitored switches can be used as plug- and-play unmanaged switches right out of the box. Installing the iView² Network Management Software gives them basic monitoring and management capabilities as well. They bridge the gap between unmanaged switches and significantly more expensive, fully managed solutions. When enabled with iView 2, these switches provide IP address assignment, allowing for a static IP address or an address that is discoverable via DHCP in the network. Then, these switches have the ability to use Modbus/TCP to communicate with HMI/SCADA software and SNMP to communicate with NMS (Networking Management Software) at the same time. This gives full access control to both control engineers and IT managers. Basic Monitoring & Management Capabilities iView2 gives network managers the ability to monitor and manage eWorx SE300 series switches from a central location. It features an intuitive Graphical User Interface (GUI) that provides a real-life representation of all installed eWorx SE300 Series switches, displaying device functions, port settings, device status information and traffic statistics via SNMP . iView2 can also configure eWorx SE300 series switches monitoring capabilities for automation applications via the popular Modbus TCP/IP protocol. Control engineers can use existing HMI/SCADA software to integrate the network status by creating extra tags for real-time monitoring. iView2 is a standalone software that supports multiple platforms and operating systems. iView2 Features for eWorx SE300 series Switches Monitoring:
  • System information (IP/MAC address)
  • Port status
  • Port speed
  • Flow control
  • Link up counter
  • TX packets counter, RX packets counter
  • TX error packets counter, RX error packets counter
  • Firmware version
  • PoE status (PoE model/s only) Management:
  • Configure IP mode
  • Set IP address
  • Set TCP Modbus/TCP time-out
  • Create Community Strings
  • Configure Traps www.advantech-bb.com / Enabling an Intelligent Planet All product specifications are subject to change without notice.

Product Ordering Information RJ45 FIBER MODEL # DESCRIPTION OPERATING TEMPERATURE 10/100 MBPS GIGABIT 100FX 100/1000BASE-SFP COMBO PORT, 10/100/1000BASE-T(X) OR 100/1000BASE-SFP TYPE CONNECTOR SE316-T 16-port 10/100 Mbps Monitored Ethernet Switch -40~75°C 16 - - - - - - Accessories - optional MODEL # DESCRIPTION MDR-40-24 DIN Rail Power supply, 24VDC 40 Watt C5UMB3FBG 3 ft. (1 M), Gray, Category 5e UTP Patch Cord C5UMB7FBG 7 ft. (2 M), Gray, Category 5e UTP Patch Cord Specifications - continued SWITCH PROPERTIES MAC Table Size 8k Packet Buffer Size 128K bit Switching Capacity 3.2 Gbps Jumbo Frame 2048 bytes POWER Power Consumption Max. 3.84W Power Input 12~48 VDC (8.4~52.8 VDC) redundant dual inputs Fault Output 1 Relay Output Reverse Polarity Protection Present Overload Current Present PHYSICAL Dimensions (WxHxD) 74 x 120 x 84 mm Enclosure IP30, metal shell with solid mounting kits Mounting DIN-Rail, Wall Package Checklist Ethernet Switch, Quick Start Guide, DIN-Rail mount bracket (installed), Wall mount bracket Warranty Limited lifetime warranty for Advantech B+B designed and/or manufactured products. SOFTWARE Management iView2, LLDP , SNMP v1/v2c, Modbus/TCP Configuration Static IP address, DHCP Client Monitoring Port Statistics (Speed/Status), Link Up/Down counter, Error Packet counter, Loop detection Filter Flow control, IEEE 802.1p QoS(Strict mode), Broadcast storm protection Industrial Profiles Modbus/TCP profiles included - Configuration and Diagnostic via automation software tools like e.g. Wonderware InTouch, STEP7, InduSoft Web Studio Specifications - continued ENVIRONMENT Operating Temperature -40 ~ 75°C (-40 ~ 167°F) Storage Temperature -40 ~ 85°C (-40 ~ 185°F) Operating Humidity 10 ~ 95% (non-condensing) Storage Humidity 10 ~ 95% (non-condensing) MTBF 4,653,552 hours CERTIFICATIONS Hazardous Environments UL Class 1 Division 2 Groups A,B,C,D; ATEX Zone 2 (pending); IECEx (pending) Safety UL508 EMI FCC Part 15 Subpart B Class A, EN 55011/55022, Class A EMS EN 61000-4-2 (Level 3), EN 61000-4-3 (Level 3) EN 61000-4-4 (Level 3), EN 61000-4-5 (Level 3) EN 61000-4-6 (Level 3), EN 61000-4-8 (Level 3) Shock IEC 60068-2-27 Freefall IEC 60068-2-32 Vibration IEC 60068-2-6 IVIEW 2 - NETWORK MANAGEMENT SOFTWARE - FREE DOWNLOAD Version iView2 Web-based Application OS Support 32-bit/64-bit Windows XP/Vista/7, Windows Server 2003/2008/2008 R2 Operation Modes Local Computer or Remote Server Web Browser Microsoft® IE, Chrome, Firefox Protocol SNMPv1 and SNMPv2c 4.724 120 2.024 51.4 .591 2.913 .386 9.8 1.215 30.9 1.600 40.6 .354 1.496 1.850 1.378 3.307 3.661 4.724 120 3.661 4.724 120 1.400 35.6 .439 11.1 2.913 1.315 33.4 .461 11.7 .646 16.4 2.913 5.110 129.8 Monitored Ethernet Switch 16 port, SNMP , Modbus/TCP Model SE316-T Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 orders@advantech-bb.com support@advantech-bb.com

Model SE316-T Mechanical Diagram | DIN Rail & Wall Mount Mount Options Units = [inches] mm 4.724 120 2.024 51.4 .591 2.913 .386 9.8 1.215 30.9 1.600 40.6 .354 1.496 1.850 1.378 3.307 3.661 4.724 120 3.661 4.724 120 1.400 35.6 .439 11.1 2.913 1.315 33.4 .461 11.7 .646 16.4 2.913 5.110 129.8 4.724 120 2.024 51.4 .591 2.913 .386 9.8 1.215 30.9 1.600 40.6 .354 1.496 1.850 1.378 3.307 3.661 4.724 120 3.661 4.724 120 1.400 35.6 .439 11.1 2.913 1.315 33.4 .461 11.7 .646 16.4 2.913 5.110 129.8 4.724 120 2.024 51.4 .591 2.913 .386 9.8 1.215 30.9 1.600 40.6 .354 1.496 1.850 1.378 3.307 3.661 4.724 120 3.661 4.724 120 1.400 35.6 .439 11.1 2.913 1.315 33.4 .461 11.7 .646 16.4 2.913 5.110 129.8 Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 orders@advantech-bb.com support@advantech-bb.com