SE2600S SKYWORKS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Table 1. SE2600S Signal Descriptions
1 TX WLAN transmit port 7 GND Ground
2 GND Ground 8 BT Bluetooth port
3 VON LNA control signal 9 VC1 BT switch control pin
4 RX WLAN receive port 10 RFC RF common port (antenna)
5 VDD Positive power supply voltage 11 VC3 Transmit switch control pin
6 VC2 Receive switch control pin
Table 2. SE2600S Absolute Maximum Ratings parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanen t damage to the device. SE2600S ESD threshold level is 1000 VDC using Human Body Model (HBM) testing. Table 3. Recommended Operating Conditions Table 2. The recommended operating conditions are specified in
Table 4. SE2600S Electrical Specifications: DC Characteristics (Note 1) Note 1: Performance is guaranteed only under the conditions listed in this Table. Table 5. SE2600S Electrical Specifications: AC Characteristics, Transmit (RFC to TX Port) (Note 1) Note 1: Performance is guaranteed only under the conditions listed in this Table. Table 6. SE2600S Electrical Specifications: AC Characteristics, Bluetooth (RFC to BT Port) (Note 1) Note 1: Performance is guaranteed only under the conditions listed in this Table.
Table 7. SE2600S Electrical Specifications: Receive Characteristics (RFC to RX Port) (Note 1) Note 1: Performance is guaranteed only under the conditions listed in this Table. Table 8. SE2600S Control Logic Evaluation Board is shown in Figure 4. Step 1: Connect system ground to pin 1 of the J14 header. Step 2: Apply 3.3 V to pin 14 of the J14 header. Table 8. For the J14 header pinout, refer to the Evaluation Board silkscreen and schematic in Figure 3. The PCB layout footprint for the SE2600S is provided in Figure 5. tape and reel dimensions are provided in Figure 8.
moisture after the container seal is broken must be followed. Scale Packages, document number 201676. done manually or in a production solder reflow environment. package. Sense is top view through package (PCB footprint). Figure 3. SE2600S Evaluation Board Schematic
Table 9. SE2600S Evaluation Board Bill of Materials (BOM) Table 10. SE2600S Bump Pad Coordinates
1 TX –375 +375
2 GND –375 +125
3 VON –375 –375
4 RX –125 –375
5 VDD +125 –375
6 VC2 +375 –375
7 GND +375 –125
8 BT +375 +125
9 VC1 +375 +375
10 RFC +125 +375
11 VC3 –125 +375
Figure 4. SE2600S Evaluation Board Assembly Diagram
DATA SHEET • SE2600S WLAN SWITCH/LNA FEM 10 July 1, 2019 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 201654E
Ordering Information
Model Name Manufacturing Part Number Evaluation Board Part Number SE2600S LNA Front-End SE2600S-R SE2600S-EK1 Copyright © 2011, 2019 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service t o its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of S kyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com