SE2521A60 SKYWORKS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 17
Technical content
Features
Pin for pin compatible to Skyworks’ SE2521A34 but providing 2 dB extra output power Dual Mode IEEE802.11b & IEEE802.11g All RF ports matched to 50 Ω Integrated PA, TX Filter, DPDT T/R and Diversity switches Integrated Power Detector 23 dBm O/P Power, 802.11b, 11 Mbits, ACPR <- 35 dBc 18 dBm @ 2.0 %, 802.11g, 54 Mbits Single supply voltage: 3.3 V ± 10 % Lead free and RoHS compliant Small lead free plated package, 8 mm x 7 mm x 1.1 mm, MSL 3
Ordering Information
Part No. Package Remark SE2521A60 24 pin LGA Samples SE2521A60-R 24 pin LGA Tape and Reel SE2521A60-EK1 N/A Evaluation kit Product Description The SE2521A60 is a complete 802.11 b/g WLAN RF front-end module providing all the functionality of the power amplifier, power detector, T/R switch, diversity switch and associated matching. The SE2521A60 provides a complete 2.4 GHz WLAN RF solution from the output of the transceiver to the antennas in an ultra compact form factor. Designed for ease of use, all RF ports are matched to 50 Ω to simplify PCB layout and the interface to the transceiver RFIC. The SE2521A60 also includes a transmitter power detector with 20 dB of dynamic range and a digital enable control for transmitter power ramp on/off control. The power ramp rise/fall time is 1 μsec typical. The device also provides a notch filter from 3.2-3.3 GHz prior to the input of the power amplifier. The SE2521A60 is footprint compatible to Skyworks’ SE2521A34 and can be placed directly into existing SE2521A34 designs easily providin g higher output power solutions
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 2 Functional Block Diagram Bias Circuitry Power Detector ANT_B PD_OUT TXEN
50 Ohm
ANT_A OMN LPF VCC1 Figure 1: Functional Block Diagram
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 3 Pin Out Diagram 1GND 2VCC1 3VCC1 4GND 5GND 17 C4 16 C3 15 C2 14 C1
13 PD_OUT
ANT_A GND GND 6 7 8 9 10 11 TX_IN GND GND GND RX_OUT N/C ANT_B 12TXEN Figure 2: SE2521A60 Pin Out (Top View Through Package) Pin Out Description Pin No. Name Description
1 GND Ground
2 VCC1 +3.3 V DC 3 VCC1 +3.3 V DC 4,5 GND Ground
6 TX_IN Transmit Input
7,8,9 GND Ground
10 RX_OUT Receive Output
11 N/C No Connect
12 TXEN Transmit Enable
13 PD_OUT Power Detector
14 C1 Control 1 Input
15 C2 Control 2 Input
16 C3 Control 3 Input
17 C4 Control 4 Input
18 ANT_B Antenna B (50 ohm)
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 4 Pin No. Name Description 19,20 GND Ground
21 ANT_A Antenna A (50 ohm)
22,23,24 GND Ground Absolute Maximum Ratings These are stress ratings only. Exposure to stresses beyond these maximum r atings may cause permanent damage to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protec ted workstations. Symbol Definition Min. Max. Unit VCC Supply Voltage on VCC -0.3 4.0 V TXEN Power Amplifier Enable -0.3 4.0 V TXRF RF Input Power - 2.0 dBm TA Operating Temperature Range -20 85 °C TSTG Storage Temperature Range -40 150 °C Recommended Operating Conditions Symbol Parameter Min. Typ. Max. Unit VCC Supply Voltage 3.0 3.3 3.6 V TA Ambient Temperature 0 25 85 °C Conditions: VCC = VEN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE2521A60-EV1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted Symbol Parameter Conditions Min. Typ. Max. Unit ICC-G Total Supply Current POUT = 18 dBm, 54 Mbps OFDM signal, 64QAM 165 180 230 mA POUT = 15 dBm, 54 Mbps OFDM signal, 64QAM 110 150 215 mA ICC-B Total Supply Current POUT = 20 dBm, 11 Mbps CCK signal, BT = 0.45 175 205 275 mA ICC_OFF Total Supply Current VEN = 0 V, No RF Applied, C1 = C2 = C3 = C4 = 0 V - 2 10 μA
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 5 Logic Characteristics Conditions: VCC = VEN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE2521A60-EV1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Unit VENH Logic High Voltage (Module On) - 2.0 - VCC V VENL Logic Low Voltage (Module Off) - 0 - 0.5 V IENH Input Current Logic High Voltage - -1 - 200 μA IENL Input Current Logic Low Voltage - -1 - 1 μA Switch Characteristics Conditions: VCC = VEN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE2521A60-EV1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Unit VCTL_ON Control Voltage (On State) - 3.0 - 3.6 V VCTL_OFF Control Voltage (OFF State) - 0.0 - 0.2 V SWON Low Loss Switch Control Voltage High State = V CTL_ON - VCTL_OFF 2.8 - VCC V SWOFF High Loss Switch Control Voltage Low State = VCTL_OFF - VCTL_OFF 0 - 0.3 V ICTL_ON Switch Control Bias Current (RF Applied) On pin (C1,C2,C3,C4) being driven high. RF Applied - - 100 µA ICTL_ON Switch Control Bias Current (No RF) On pin (C1,C2,C3,C4) being driven high. No RF - - 30 µA CCTL Control Input Capacitance - - - 100 pF Switch Control Logic Table Switch Logic Operational Mode C1 C4 C2 C3 TXRF – ANTA TXRF – ANTB RXRF – ANTA RXRF – ANTB SWON SWOFF SWOFF SWOFF ON OFF OFF OFF SWOFF SWON SWOFF SWOFF OFF ON OFF OFF
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 6 Switch Logic Operational Mode C1 C4 C2 C3 TXRF – ANTA TXRF – ANTB RXRF – ANTA RXRF – ANTB SWOFF SWOFF SWON SWOFF OFF OFF ON OFF SWOFF SWOFF SWOFF SWON OFF OFF OFF ON 802.11g Transmit Characteristics Conditions: VCC = VEN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE2521A60-EV1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FIN Frequency Range - 2400 - 2500 MHz P802.11g Output power 54 Mbps OFDM signal, 64QAM, EVM = 2.0 % - 18 - dBm P802.11b Output power
11 Mbps CCK signal,
BT = 0.45 ACPR(Adj) < -32 ACPR(Alt) < -52 - 23 - dBm P1dB P1dB - 22.5 25.5 - dBm S21 Small Signal Gain - 25 - 33 dB ΔS21 Small Signal Gain Variation Over Band - - 1.0 3.0 dB S213.2 Gain @ 3.2 to 3.3 GHz - - 0 7 dB 2f,3f Harmonics Pout = 19 dBm, 2 Mbps, 802.11b CCK - -49 -42 dBm/MHz IM3 3rd Order Inter- modulation f1 and f2 at Fc +/- 312.5 kHz, P = 15 dBm - -40 -33 dBc IM5 5th Order Inter- modulation f1 and f2 at Fc +/- 312.5 kHz, P = 15 dBm - -55 -47 dBc tr Rise Time 10 % to 90% of final output power level - 0.12 0.5 μs tdr, tdf Delay and rise/fall Time 50 % of VEN edge and 90/10 % of final output power level - - 1.0 μs S11 Input Return Loss - 4.5 6.5 - dB STAB Stability PIN ≤ -2 dBm Load VSWR = 6:1 All non-harmonically related outputs less than -50 dBc/1MHz
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 7 Receive Characteristics Conditions: VCC = VEN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE2521A60-EV1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FOUT Frequency Range - 2400 - 2500 MHz RXIL Insertion Loss - - 0.8 1.2 dB RXRL Return Loss - - -15 -10 dB Delta Rx Delta between Rx paths ANT_A to RX_OUT or ANT_B to RX_OUT - - 0.5 dB TRISOL-2 Rx Leakage C1 or C4 = SWON, C2 = C3 = SWOFF, Device transmitting 15 dBm @ ANTA or ANTB, Power measured @ RX_OUT -9 - 3 dBm ANTRISOL Isolation between ANT_A and ANT_B to RX_OUT Small signal input into ANT_A or ANT_B, Device not transmitting, Power measured @ RX_OUT, C1 AND C4 = SWON, C2 and C3 = SWOFF 14 - 24 dB Power Detector Characteristics Conditions: VCC = VEN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE2521A60-EV1 evaluation board (de-embedded to device), unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FOUT Frequency Range - 2400 - 2500 MHz PDR Power detect range, peak power Measured at ANT_A or ANT_B 0 - 20 dBm PDZLOAD DC load impedance - 1 - - Mohm PDVNoRF Output Voltage, POUT = No RF - 0.90 - 1.02 V PDVp18 Output Voltage, POUT = 18dBm - 0.44 - 0.66 V PDVp20 Output Voltage, POUT = 20dBm - 0.28 - 0.51 V LPF-3dB Power detect low pass filter -3dB corner frequency PDZLOAD = >1 Mohm, PDCLOAD = 180 pF 270 330 400 KHz Note: Power detector internal impedance is 2.7 KOhm
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 8 Power Detector Response Characteristic 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 2 4 6 8 10 12 14 16 18 20 22 Output Power (dBm) VDET (V) Figure 3: SE2521A60 Power Detector Performance Curve Typical Performance Data (Ambient Temperature) Conditions: VCC = VEN = 3.3 V, Frequency = 2450 MHz, TA = 25 °C, as measured on Skyworks Solutions’ SE2521A60-EV1 evaluation board , all unused ports terminated with 50 ohms, unless otherwise noted. 802.11g Typical Performance Conditions: 54Mbps 802.11g OFDM Signal 802.11g EVM vs. Output Pow er over Frequency (25 C, 3.3V) 0.5 1.5 2.5 3.5 4.5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Output Power (dBm) EVM (%)
2400 MHz 2450 MHz 2500 MHz
802.11g EVM vs. Output Pow er over Voltage (2450 MHz, 25 C) 0.5 1.5 2.5 3.5 4.5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Output Power (dBm) EVM (%) 2.7 V 3.0 V 3.3 V 3.6 V Figure 4: 802.11g Typical EVM Performance: (a) Over Frequency, (b) Over Voltage
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 9 802.11g OFDM ICC vs. Output Pow er over Frequency (25 C, 3.3 V) 100 120 140 160 180 200 220 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Output Power (dBm) ICC (mA) Figure 5: 802.11g Typical Current Consumption (ICC) Performance over Frequency 802.11b Typical Performance 802.11B ACPR-Adj vs. Output Pow er over Voltage (25 C, 2450 MHz, 802.11b 11 Mbps Signal) -40 -38 -36 -34 -32 -30 -28 -26 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Output Power (dBm) ACPR (dBc) 2.7 V 3.0 V 3.3 V 3.6 V 802.11B ACPR-Alt vs. Output Pow er over Voltage (25 C, 2450 MHz, 802.11b 11Mbps Signal) -70 -65 -60 -55 -50 -45 -40 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Output Power (dBm) ACPR (dBc) 2.7 V 3.0 V 3.3 V 3.6 V (a) (b) Figure 6: 802.11b Typical ACPR Performance (11 Mbps, CCK, BT = 0.45) (a) 802.11b ACPR-ADJ vs. POUT over Voltage and (b) 802.11b ACPR-ALT vs. POUT over Voltage 2nd, 3rd Harmonics vs. Output Power (25 C, 2450 MHz, 802.11b 1 Mbps CCK Signal) -70 -65 -60 -55 -50 -45 -40 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Output Power (dBm) Harmonic Power (dBm/1MHz) 2nd Harmonic 3rd Harmonic Figure 7: 802.11b Typical Harmonic Performance (1 Mbps, CCK) CW Typical Performance
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 10 IMD3, IMD5 vs. Output Pow er (25 C, 2450 MHz, CW) -80 -70 -60 -50 -40 -30 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Output Power (dBm) IMD (dBc) IMD3 IMD5 P1dB vs. Frequency (25 C, 3.3 V, CW) 24.5 25.5 26.5 2400 2420 2440 2460 2480 2500 Frequency (MHz) P1dB (dBm) Gain (dB) P1dB Gain (a) (b) Figure 8: Typical CW Performance (a) IMD3, IMD5 vs. Output Power, (b) P1dB, Gain vs. Frequency Detector Performance VDE T vs. Output Power over Frequency (25 C, 3.3 V, CW) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 2 4 6 8 10 12 14 16 18 20 22 Output Power (dBm) VDET (V) VDET vs. Output Pow er over Voltage (25 C, 2450 MHz, CW) 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 2 4 6 8 10 12 14 16 18 20 22 Output Power (dBm) VDET (V) 2.7 V 3.0 V 3.3 V 3.6 V (a) (b) Figure 9: Typical Power Detector Response: (a) Over Frequency, (b) Over Voltage
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 11 Typical Performance Data (Over Temperature: -40 C, 25 C, 85 C) Conditions: VCC = VEN = 3.3 V, Frequency = 2450 MHz, as measured on Skyworks Solutions’ SE2521A60-EV1 evaluation board , all unused ports terminated with 50 ohms, unless otherwise noted. 802.11g Typical Performance Conditions: 54Mbps 802.11g OFDM Signal 802.11g E VM vs. Output Power over Frequency, Temperature (3.3V) 0.5 1.5 2.5 3.5 4.5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Output Power (dBm) EVM (%) -40 C, 2400 MHz -40 C, 2450 MHz -40 C, 2500 MHz
25 C, 2400 MHz 25 C, 2450 MHz 25 C, 2500 MHz
85 C, 2400 MHz 85 C, 2450 MHz 85 C, 2500 MHz
802.11g E VM vs. Output Power over Temperature, Voltage (2450 MHz) 0.5 1.5 2.5 3.5 4.5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Output Power (dBm) EVM (%) -40 C, 2.7 V -40 C, 3.0 V -40 C, 3.3 V -40 C, 3.6 V 25 C, 2.7 V 25 C, 3.0 V 25 C, 3.3 V 25 C, 3.6 V 85 C, 2.7 V 85 C, 3.0 V 85 C, 3.3 V 85 C, 3.6 V Figure 10: 802.11g Typical EVM Performance: (a) Over Frequency and Temperature, (b) Over Voltage and Temperature 802.11g OFDM ICC vs. Output Power over Frequency, Termperature (3.3 V) 100 120 140 160 180 200 220 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Output Power (dBm) ICC (mA) -40 C, 2400 MHz -40 C, 2450 MHz -40 C, 2500 MHz Figure 11: 802.11g Typical Current Consumption (ICC) Performance over Frequency and Temperature
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 16 Branding Information The device branding is shown in Figure 19. SiGe 2521A60 Lot Code Pin 1 Identifier Part Number Lot Code Pin 1 Terminal Finish Figure 19: SE2521A60 Branding and Pin 1 Location Tape and Reel Production quantities of this product are shipped in a standard tape-and-reel format. Specific tape and reel dimensions and sizing is shown in Table 1 and Figure 20. Parameter Value Devices Per Reel 2500 Reel Diameter 13 inches
SE2521A60: 2.4 GHz Wireless LAN Front-End Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202416A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 17 Table 1: Tape and Reel Dimensions Figure 20: SE2521A60 Tape and Reel Information Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibilit y for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoev er for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this docume nt. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHE R EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON -INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life -sustaining applications, or other equipment in which the failure of t he Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in su ch applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting fr om the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, I nc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional info rmation, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.