SE1 RECTRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. SE6 THRU SE1 SOD-123F MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) Dimensions in inches and (millimeters) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 55OC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) Typical Junction Capacitance (Note 2) SYMBOL VRRM VDC IFSM CJ TSTG VRMS UNITS Volts Volts Volts Amps1.0 130 15 10 Amps 0C/W 0C/W 0 C Storage Temperature Range R q J A Typical Thermal Resistance (Note 1) 30R q J L IO pF Operating Temperature Range TJ SE1 150 -55 to + 150 0 C SE3 SE4 150 200 35 105 140 SE2 100 100 150 200 SE5 300 210 300 SE6 SE1 SE3 SE4SE2 SE5 SE6 400 400 280 2006-12 CHARACTERISTICS Maximum Average Reverse Current at Rated DC Blocking Voltage VF SYMBOL IR mA Maximum Instantaneous Forward Voltage at 1.0A DC Volts 350 @TA = 25 o C @TA = 100 o C mA UNITS 0.95 1.25 trrMaximum Reverse Recovery Time (Note 4) nSec35 NOTES : 1. Thermal Resistance :Mounted on PCB. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. "Fully ROHS compliant","100% Sn plating (Pb-free)". SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 50 to 400 Volts CURRENT 1.0 Ampere

FEATURES

  • High reliability * Low leakage * Low forward voltage * High current capability * Super fast switching speed * High surge capability * Good for switching mode circuit MECHANICAL DATA * Case: Molded plastic * Epoxy: Device has UL flammability classification 94V-O * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 0.016 gram .150 (3.8) .142 (3.6) .035 (0.90) .028 (0.70) .053 (1.35) .047 (1.20) .077 (1.95) .069 (1.75) .030 (0.75) .022 (0.55) .008 (0.20) .114 (2.9) .106 (2.7)

AMBIENT TEMPERATURE, ( O INSTANTANEOUS REVERSE CURRENT, (uA) 1.0 0.8 0.6 0.4 0.2 7550 175100 125 150 RATING AND CHARACTERISTICS CURVES ( SE1 THRU SE6 ) FIG.2 TYPICAL FORWARD CURRENT DERATING CURVE FIG.1 TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) AVERAGE FORWARD CURRENT, (A) 0.1 1.0 1000 100 6020 40 80 100 120 140 FIG.3 TYPICAL REVERSE CHARACTERISTICS trr +0.5A50 W NONINDUCTIVE 10 W NONINDUCTIVE -0.25A -1.0A 1cm SET TIME BASE FOR 14/1 ns/cm NOTES: 1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. 2. Rise Time = 10ns max. Source Impedance = 50 ohms. D.U.T

25 Vdc

(approx) ( - ) ( - ) ( + ) ( + ) NON- INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) Single Phase Half Wave 60Hz Resistive or Inductive Load TA = 25 O C TA = 75 O C TA = 100 O C

PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS FORWARD CURRENT, (A) 1.0 0.3 0.1 0.03 0.01 3.0 RATING AND CHARACTERISTICS CURVES ( SE1 THRU SE6 ) FIG.4 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT REVERSE VOLTAGE, (V) JUNCTION CAPACITANCE, (pF) 200 100 0.20.1 1 0.4 21.0 4 10 20 40 100 FIG.6 TYPICAL JUNCTION CAPACITANCE 8.3ms Single Half Sine-Wave (JEDED Method) Pulse Width=300uS 1% Duty Cycle TJ = 25 O C TJ = 25 O C SE1~SE4 SE1~SE4 SE5~SE6 SE5~SE6

Dimensions in inches and (millimeters) 0.035MIN. (0.90 MIN.) 0.165 0.030 MIN. (0.75 MIN.) (4.19) REF

Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE