SE1L

SE1L RECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 50 to 200 Volts CURRENT 1.0 Ampere

FEATURES

• High reliability * Low leakage * Low forward voltage * High current capability * Super fast switching speed * High surge capability * Good for switching mode circuit MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. ELECTRICAL CHARACTERISTICS (At TA = 25 o C unless otherwise noted) SE1L THRU SE4L SOD-123FL MAXIMUM RATINGS (At TA = 25 o C unless otherwise noted) 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts. MECHANICAL DATA * Case: Molded plastic * Epoxy: Device has UL flammability classification 94V-O * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 0.016 gram 2006-3 REV:O RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Volts Maximum DC Blocking Voltage Maximum Average Forward Current at TA = 55 o C Peak Forward Surge Current IFM (surge):8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range SYMBOL VRRM VDC IO IFSM CJ TJ, TSTG VRMS Volts Volts Volts Amps1.0 -55 to + 150 Amps pF 0 C UNITSSE1L SE4LSE2L SE3L 50 200100 150 35 14070 105 50 200100 150 at Rated DC Blocking Voltage CHARACTERISTICS Maximum Reverse Recovery Time (Note 1) VF SYMBOL IR trr UNITS 0.95 5.0 uAmps nSec Maximum DC Reverse Current Maximum Forward Voltage at 1.0 A DC Volts @TA = 25 o C @TA =100 o C SE1L SE4LSE2L SE3L 100 3.“Fully ROHS compliant”, “100% Sn plating (Pb-free)”. Dimensions in inches and (millimeters) .150 (3.8) .142 (3.6) .052 (1.32) .050 (1.28) .033 (0.85) .043 (1.08) .033 (0.85) .030 (0.75) .035 (0.90) .028 (0.70) .039 (1.00) .035 (0.90) .077 (1.95) .069 (1.75) .008 (0.20) .114 (2.9) .106 (2.7)

RATING AND CHARACTERISTIC CURVES ( SE1L THRU SE4L ) FIG. 6 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) REVERSE VOLTAGE, ( V ) 200 100 .1 .2 .4 1.0 2 4 10 20 40 100 TJ = 25 FIG. 1 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC NONINDUCTIVE NONINDUCTIVE D.U.T

25 Vdc

(approx) ( - ) (-) ( + ) ( + ) NON- INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) NOTES: 1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. 2. Rise Time = 10ns max. Source Impedance = 50 ohms. trr +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 10 ns/cm FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURENT, (A) AMBIENT TEMPERATURE ( ) 2.0 1.0 0 25 50 75 100 125 150175 Single Phase Half Wave 60Hz Resistive or Inductive Load FIG. 3 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) TJ = 100 100 1.0 400 20 60 80 100 120 140 FIG. 5 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) NUMBER OF CYCLES AT 60Hz 1 2 5 10 20 50 100 8.3ms Single Half Sine-Wave (JEDEC Method) FIG. 4 - TYPICAL INSTANTANEOUS FORWARD INSTANTANEOUS FORWARD CURRENT, (A) INSTANTANEOUS FORWARD VOLTAGE, (V) .001 .01 1.0 Pulse Width = 300uS 1% Duty Cycle TJ = 25 CHARACTERISTICS JT = 25 1000

Dimensions in inches and (millimeters) .033 (0.85)REF .035 (0.9)REF .052 (1.32)REF .033 (0.85)REF .150 (3.8)REF .044 (1.12)REF

Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE