SE110-00 FARADAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA087d Pag e 1 of 2 Feb-00 (B) The SE110-00 is a surface mountable active hybrid module designed to interface Philips SAA7185 series digital video encoders to 75 Ω composite (CMPS), Luma (Y) and Chroma (C) outputs. Use of high performance operational amplifiers ensures minimal differential phase/gain errors and the ability to drive ± 2.5V into 75 Ω loads. Other features
- Drives two composite outputs and one Y/C output
- accurate factory set gain of 0 dB (6 dB optional - order SE110-60)
- 75 Ω output termination resistors provided
- sin x/x correction for 27 MHz sampling
- high input impedance - makes interfacing easy
- DC coupling eliminates tilt problems associated with AC coupling
- DC offset of encoder output ( due to single rail operation ) is corrected to bring blanking level near zero
- 24-pin j-lead surface mount package FILTER SPECIFICATION FOR EACH CHANNEL End of Passband 6.0 MHz Passband shape sin x/x Sampling frequency 27 MHz Amplitude ripple 1 ± 0.5 dB to 6.0 MHz, Gain 0 dB ± 0.2 dB Group Delay ripple < 10 ns Start of stopband 21 MHz Stopband rejection wrt 100 kHz > 40 dB (with sin x/x ) Input impedance 100 k Ω typical Output impedance 75 Ω Supply voltage ± 5V Supply current 25 mA per rail (typical) Aqueous Washable Yes 1 measured against sin x/x predistortion curve SE110-00 SET-TOP VIDEO POST FILTER
Faraday Technology Ltd. Tel: + 44 (0)1782 661501 Croft Road Industrial Estate, Fax: + 44 (0)1782 630101 Newcastle, Staffordshire Email: sales@faradaytech.co.uk FARA087d Page 2 of 2 Feb-00 (B)