SE1051 SEAWARD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
¾ Constant Voltage and Constant Current Control ¾ Low Voltage Operation at 3V ¾ Precision Internal Voltage Reference ¾ Low External Component Count ¾ Current Sink Output Stage ¾ Easy Compensation ¾ Low AC Mains Voltage Rejection ¾ Rugged 2KV ESD withstand capability. ¾ Available in SOT-23-6L Package. ¾ RoHS Compliant and 100% Lead (Pb)-Free
Description
SE1051 is a highly integrated solution for SMPS applications requiring CV (constant voltage) and CC (constant current) modes. SE1051 integrates one voltage reference, two operational amplifiers (the outputs are OR’ed together, common collectors), and a current sensing circuit. The voltage reference, together with one operational amplifier, makes it an ideal voltage controller. The other low voltage reference, together with another operational amplifier, makes it an ideal current limiter for low side output current sensing. The current threshold is fixed, and precise. The SE1051, housed in space-saving SOT23-6L package, is ideal for space sensitive applications such as adapters, cellphone chargers, Digital Camera chargers, and other battery chargers. Pin Configuration Application ¾ Adapters ¾ Digital Camera Chargers. ¾ Cellphone Chargers. ¾ Other Battery Chargers Ordering Information/Making Information Device Package V OUT SE1051 SOT-23-6L (Lead-free) Fixed output voltages 1.21V Pin Description Name Pin# Type Function VCTRL 1 Analog Input Input Pin of the Voltage Control Loop GND 2 Power Supply Ground Line. 0V Reference For All Voltages VOUT 3 Current Sink Output Output Pin. Sinking Current Only ICTRL 4 Analog Input Input Pin of the Current Control Loop VSENSE 5 Analog Input Input Pin of the Current Control Loop VCC 6 Power Supply Positive Power Supply Line Package Making Information PIN1 is down in the left-hand corner. The last character is the batch number. A dot on top right corner is for lead-free process.
Preliminary and all contents are subject to change without prior notice. Absolute Maximum Rating Symbol Parameter Maximum Units VCC DC Supply Voltage 18 V VIN Input Supply Voltage -0.3~ V CC V θJA Thermal Resistance Junction to Ambient 250 °C/W TJ Operating Junction Temperature Range 0 to 125 °C TSTG Storage Temperature Range -40 to 150 °C TLEAD Lead Temperature (Soldering 10 Sec) 260 °C Electrical Characteristic VCC = 5.0V, TA = 25°C, unless otherwise specified. Symbol Parameter Test Condition Min Typ Max Unit Total Current Consumption
0.4 ICC
Total Supply Current - not taking the output sinking current into account 0 < TA < 85°C 0.5 mA Voltage Control Loop
2.4 Gmv
Transconduction Gain (VCTRL). Sink Current Only1) 0 < TA < 85°C 2.0 mA/mV
1.21 VREF
Voltage Control Loop Reference2) 0 < TA < 85°C V
50 IIBV
Input Bias Current (VCTRL) 0 < TA < 85°C 100 nA Current Control Loop Gmi Transconduction Gain (I CTRL). Sink Current Only3) 0 < T A < 85°C 2.9 mA/mV IOUT = 2.5mA 240 VSENSE Current Control Loop Reference4) 0 < TA < 85°C mV
25 IIBI
Current out of pin ICTRL at -200mV 0 < TA < 85°C 50 μA Output Stage VOL Low output voltage at 10 mA sinking current 0 < T A < 85°C 300 mV
22 IOS
Output Short Circuit Current. Output to VCC. Sink Current Only 0 < TA < 85°C 35 mA 1. If the voltage on V CTRL (the negative input of the amplifier) is higher than the positive amplifier input (VREF=1.210V), and it is increased by 1mV, the sinking current at the output OUT will be increased by 2.4mA. 2. The internal Voltage Reference is set at 1.210V. T he internal Voltage Reference is fixed by bandgap, and trimmed to 0.5% accuracy at room temperature. 3. When the positive input at ICTRL is lower than -240mV, and the voltage is decreased by 1mV, the sinking current at the output OUT will be increased by 2.9mA. 4. The internal current sense threshold is set to -240mV. The current control loop prec ision takes into account the cumulative effects of the internal voltage reference deviation as well as the input offs et voltage of the trans-conduction operational amplifier.
Preliminary and all contents are subject to change without prior notice. Block Diagram Typical Application Rsense Ric2 Ric1 Cic1 Rvc1 Cvc1 2.2nF 22pF 2.2nF Vout+ Vout- To prim ary Rout Ic trl Vsense GN D Vct rl VoutVcc 240mV SE1051 Load 1.210V VCL CCL Cs Rs Fig.1 Typical Adapter or Battery Charger Application Using SE1051 In the above application schematic, the SE1051 is used on the secondary side of a flyback adapter (or battery charger) to provide an accurate control of voltage and current. The above feedback loop is made with an optocoupler. SENSE SENSE LIMIT REFOUT R VI R RRVV +×= 1 1.210V 240mV Vcc Vout Vctrl GND VsenseIc tr l VCL CCL
Preliminary and all contents are subject to change without prior notice. Application Hints Voltage Control The voltage loop is controlled via a first transconductance operational amplifier, the resistor bridge R1, R2, and the optocoupler which is directly connected to the output. The relation between the values of R1 and R2 should be chosen as written in Equation 1. R1 = R2 x Vref / (Vout - Vref) Eq1 Where Vout is the desired output voltage. To avoid the discharge of the load, the resistor bridge R1, R2 should be highly resistive. For this type of application, a total value of 100K Ω (or more) would be appropriate for the resistors R1 and R2. As an example, with R2 = 100K Ω, Vout = 4.10V, Vref = 1.210V, then R1 = 41.9KΩ. Note that if the low drop diode should be inserted between the load and the voltage regulation resistor bridge to avoid current flowing from the load through the resistor bridge, this drop should be taken into account in the above calculations by replacing Vout by (Vout + Vdrop). Current Control The current loop is controlled via the second trans-conductance operational amplifier, the sense resistor Rsense, and the optocoupler. The control equation is: Rsense x I-limit = Vsense Eq2 Rsense = Vsense / I-limit Eq3 where I-limit is the desired current limit, and Vsense is the threshold voltage for the current control loop. As an example, with I-limit = 1A, Vsense = -240mV, then Rsense = 240mΩ. Note that the Rsense resi stor should be selected with the consideration of the Maximum Power in full load operations (P-limit). P-limit = Vsense x I-limit. Eq4 As an example, with I-limit = 1A, and Vsense =-240mV, P-limit = 240mW. Consequently, for most adapter and battery charger applications, a quarter-watt resistor to make the current sensing function is sufficient. Vsense threshold is achieved internally by a resistor bridge tied to the Vref voltage reference. Its middle point is tied to the positive input of the current control operational amplifier, and its foot is to be connected to lower potential point of the sense resistor as shown on the following figure. The resistors of this bridge are matched in layout to provide the best precision possible. The current sinking outputs of the two trans-conductance operational amplifiers are connected together. This makes an ORing function which ensures that whenever the current or the voltage reaches too high values, the optocoupler is activated. The relation between the controlled current and the controlled output voltage can be described with a square characteristic as shown in the following V/I output-power graph. Fig.2 Output voltage versus output current Compensation The voltage-control trans-conductance operational amplifier can be fully compensated. Both of its output and negat ive input are directly accessible for external compensation components. An example of a suitable compensation network is shown in Fig.1. It consists of a capacitor Cvc1=2.2nF and a resistor Rcv1=470K Ω in series, connected in parallel with another capacitor Cvc2=22pF. The current-control trans-conductance operational amplifier can also be fully compensated. Both of its output and negative input are directly accessible for external compensation components. An example of a suitable compensation network is shown in Fig.1. It consists of a capacitor Cic1=2.2nF and a resistor Ric1=22KΩ in series. When the Vcc voltage reaches 12V it could be interesting to limit the current coming through the output in the aim to reduc e the dissipation of the device and increase the stability performances of the whole application. An example of a suitable Rout value could be 330Ω in series with the opto-coupler in case Vcc=12V.
Preliminary and all contents are subject to change without prior notice. Start Up and Short Circuit Conditions Under start-up or short-circuit conditions the SE1051 does not have a high enough supply voltage. This is due to the fact that the chip has its power supply line in common with the power supply line of the charger system. Consequently, the current limitation can only be ensu red by the primary PWM module, which should be designed accordingly. If the primary current limitation is considered not to be precise enough for the application, then a sufficient supply for the SE1051 has to be ensured under any condition. It would then be necessary to add some circuitry to supply the chip with a separate power line. This can be achieved in numerous ways, including an additional winding on the transformer. The following schematic shows how to realize a lo w-cost power supply for the SE1051 (with no additional windings). Please pay attention to the fact that in the particular case presented here, this low-cost power supply can reach voltages as high as twice the voltage of the r egulated line. Since the Absolute Maximum Rating of the SE1051 supply voltage is 18V, this low-cost auxiliary power supply can only be used in applications where the regulated line voltage does not exceed 9V. Rsense Ric2 Ric1 Cic1 Rvc1 Cvc1 2.2nF 22pF 2.2nF Vout+ Vout- To prim ary Rout Rs Ic trl Vsense GND Vct rl Vout Vcc 240mV SE1051 Cs 1.210V VCL CCL Fig. 3
Preliminary and all contents are subject to change without prior notice. OUTLINE DRAWING SOT-23-6L Customer Support Seaward Electronics Incorporated – China Section B, 2nd Floor, ShangDi Scientific Office Complex, #22 XinXi Road Haidian District, Beijing 100085, China Tel: 86-10-8289-5700/01/05 Fax: 86-10-8289-5706 Seaward Electronics Corporation – Taiwan 2F, #181, Sec. 3, Minquan East Rd, Taipei, Taiwan R.O.C Tel: 886-2-2712-0307 Fax: 886-2-2712-0191 Seaward Electronics Incorporated – North America 1512 Centre Pointe Dr. Milpitas, CA95035, USA Tel: 1-408-821-6600 Last Updated - 12/4/2008