SDH01_14 P-DUKE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1 www.PDUKE.com 2014/7/31 SDS01 SDH01 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 1.08 WATTS FEATURES APPLICATIONS

  • ULTRA SMALL SMD AND DIP PACKAGE, 0.52 x 0.36x 0.40 INCH WITH REGULATED
  • SMD PACKAGE QUALIFIED FOR LEADFREE REFLOW SOLDER PROCESS ACCORDING IPC J-STD-020D
  • NO MINIMUM LOAD REQUIRED
  • CONTINUOUS SHORT CIRCUIT PROTECTION
  • 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR OPTION
  • SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1
  • CE MARKED
  • COMPLIANT TO RoHS II & REACH
  • WIRELESS NETWORK
  • TELECOM/DATACOM
  • INDUSTRY CONTROL SYSTEM
  • MEASUREMENT EQUIPMENT
  • SEMICONDUCTOR EQUIPMENT 3000VDC ISOLATION 1600VDC ISOLATION REMOTE CONTROL OCP SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 ℃ otherwise noted Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load Model Number VDC VDC mA mA % µF SDS(H)01-05S3P3 4.5 ~ 9 3.3 300 20 78 1680 SDS(H)01-05S05 4.5 ~ 9 5 200 25 80 820 SDS(H)01-05S12 4.5 ~ 9 12 90 30 83 470 SDS(H)01-05S15 4.5 ~ 9 15 70 30 83 330 SDS(H)01-05S24 4.5 ~ 9 24 45 30 82 160 SDS(H)01-05D05 4.5 ~ 9 ±5 ±100 30 81 ±470 SDS(H)01-05D12 4.5 ~ 9 ±12 ±45 30 82 ±330 SDS(H)01-05D15 4.5 ~ 9 ±15 ±35 30 82 ±220 SDS(H)01-12S3P3 9 ~ 18 3.3 300 10 78 1680 SDS(H)01-12S05 9 ~ 18 5 200 10 80 820 SDS(H)01-12S12 9 ~ 18 12 90 13 83 470 SDS(H)01-12S15 9 ~ 18 15 70 13 83 330 SDS(H)01-12S24 9 ~ 18 24 45 15 82 160 SDS(H)01-12D05 9 ~ 18 ±5 ±100 15 80 ±470 SDS(H)01-12D12 9 ~ 18 ±12 ±45 15 82 ±330 SDS(H)01-12D15 9 ~ 18 ±15 ±35 15 82 ±220 SDS(H)01-24S3P3 18 ~ 36 3.3 300 6 78 1680 SDS(H)01-24S05 18 ~ 36 5 200 6 81 820 SDS(H)01-24S12 18 ~ 36 12 90 6 83 470 SDS(H)01-24S15 18 ~ 36 15 70 6 83 330 SDS(H)01-24S24 18 ~ 36 24 45 8 82 160 SDS(H)01-24D05 18 ~ 36 ±5 ±100 8 80 ±470 SDS(H)01-24D12 18 ~ 36 ±12 ±45 8 82 ±330 SDS(H)01-24D15 18 ~ 36 ±15 ±35 8 82 ±220 SDS(H)01-48S3P3 36 ~ 75 3.3 300 5 79 1680 SDS(H)01-48S05 36 ~ 75 5 200 5 80 820 SDS(H)01-48S12 36 ~ 75 12 90 5 82 470 SDS(H)01-48S15 36 ~ 75 15 70 5 83 330 SDS(H)01-48S24 36 ~ 75 24 45 5 82 160 SDS(H)01-48D05 36 ~ 75 ±5 ±100 5 80 ±470 SDS(H)01-48D12 36 ~ 75 ±12 ±45 5 82 ±330 SDS(H)01-48D15 36 ~ 75 ±15 ±35 5 81 ±220

2 www.PDUKE.com 2014/7/31 PART NUMBER STRUCTURE SDS01 - 48 S 05 H Series Name Input Output Output Isolation Voltage Quantity Voltage Option (VDC) (VDC) SDS: SMD type 05: 4.5~9 S: Single 3P3: 3.3 /filetall/filetall /filetall/filetall: Standard type SDH: DIP type 12: 9~18 05: 5 1600VDC isolation 24: 18~36 12:12 H: 3000VDC isolation 48: 36~75 15:15 24: 24 D: Dual 05:± 5 12: ± 12 15: ± 15 INPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating input voltage range 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 4.5 VDC Start up time Constant resistive load Power up Remote ON/OFF 5 10 ms Input surge voltage 1 second, max. 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 100 VDC Input reflected ripple current (1) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) mAp-p Input filter Capacitor type DC-DC ON Open or high impedance Ctrl pin applied current via 1k Ω DC-DC OFF 2.0 3.0 4.0 mA Remote ON/OFF Remote off input current 2.5 mA Application circuit DC-DC ON DC-DC OFF OUTPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Voltage accuracy -1.0 +1.0 % Line regulation Low Line to High Line at Full Load -0.2 +0.2 % No Load to Full Load Single Dual -1.0 -1.0 +1.0 +1.0 Load regulation 10% Load to 90% Load Single Dual -0.5 -0.8 +0.5 +0.8 Cross regulation Asymmetrical load 25%/100% FL Dual -5.0 +5.0 % Ripple and noise Measured by 20MHz bandwidth 30 mVp-p Temperature coefficient -0.02 +0.02 %/ ℃ Transient response recovery time 25% load step change 500 µs Short circuit protection Continuous, automatics recovery

3 www.PDUKE.com 2014/7/31 GENERAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Isolation voltage 1 minute Standard Suffix ”H” 1600 3000 VDC Isolation resistance 500VDC 1 G Ω Isolation capacitance Standard Suffix ”H” 50 pF Switching frequency 100 kHz Safety meets UL60950-1 EN60950-1 IEC60950-1 Case material Non-conductive black plastic Base material Non-conductive black plastic Potting material Silicone (UL94 V-0) Weight 2.7g (0.10oz) MTBF MIL-HDBK-217F, Full load 8.534 x 10 6 hrs ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating ambient temperature Without derating With derating -40 +90 +90 +105 ℃ Storage temperature range -55 +125 ℃ Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH Lead-free reflow solder process IPC J-STD-020D Moisture sensitivity level(MSL) IPC J-STD-033B Level 2 EMC SPECIFICATIONS Parameter Conditions Level EMI (1) EN55022 Class A, Class B ESD EN61000-4-2 Air ± 8kV Contact ± 6kV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (2) EN61000-4-4 ± 2kV Perf. Criteria A Surge (2) EN61000-4-5 ± 1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A Note: 1. The standard modules meet EMI Class A or Class B and input reflected ripple current with external components. For further information, please contact with P-DUKE. 2. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE SDS(H)01-48S05 Derating Curve SDS(H)01-48S05 Effici ency vs. Input Voltage SDS(H)01-48S05 Efficiency vs . Output Current

4 www.PDUKE.com 2014/7/31 MECHANICAL DRAWING SDS01 PIN CONNECTION PIN SINGLE DUAL 1 +Vin +Vin 2 -Vin -Vin

4 Ctrl Ctrl

5 NC -Vout

  1. All dimensions in inch (mm) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) SDH01