SDR803 SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Designer's Data Sheet FEATURES:

100 AMP

100 AmpsIo

I FSM Volts SYMBOL UNITS VALUE V RRM V RWM V R R ΘΘΘΘΘ JC 0.85 Peak Repetitive Reverse and DC Blocking Voltage @ 100µA Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25oC) Maximum Thermal Resistance Junction to Case Average Rectified Forward Current (Resistive Load, 60Hz, Sine Wave, TA = 25 oC) oC/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0059F

  • Ultra Fast Recovery: 60 nsec maximum.
  • PIV to 1200 Volts.
  • Low Forward Voltage Drop.
  • Low Leakage Current.
  • Hermetically Sealed.
  • Single Chip Construction.
  • For High Efficiency Applications.
  • TX, TXV , and Space Level Screening Available oC-55 TO +175T OP & TSTGOperating and Storage Temperature SDR803 SDR804 SDR805 SDR806 SDR807 SDR808 SDR809 SDR810 SDR811 SDR812 SDR813 SDR814 SDR815 SDR816 SDR817 SDR818 SDR803 - 806 SDR807 - 809 SDR810 - 814 SDR815 - 818 SOLID STATE DEVICES, INC.

14830 Valley View Blvd * La Mirada, Ca 90638

Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com

0 25 50 75 100 125 150 175 200 µµµµµA mA Reverse Leakage Current (Rated VR , 300 µs minimum Pulse) 100 10IR pF700C J Junction Capacitance (VR = 10 VDC , TA = 25oC, f = 1 MHz) CASE OUTLINE: DO-5 Electrical Characteristics SYMBOL UNITS MAXIMUM V F1 1.00 1.50 1.85 1.90 Instantaneous Forward Voltage Drop F = 100ADC , TA = 25oC, 300 - 500µs Pulse) V DC TYPICAL OPERATING CURVES (TA = 25oC unless otherwise specified) PERCENT OF MAXIMUM FORW ARD CURRENT RATING (%) SDR803 thru SDR818 V F2 1.10 1.60 1.95 2.00 Instantaneous Forward Voltage Drop F = 100ADC , TA = -55oC, 300 - 500µs Pulse) V DC nsec60tRR Reverse Recovery Time (IF = 500 mA, IR = 1 A, IRR = 250 mA, TA = 25oC) 55oC TA = 25oC TA = 100oC SDR803 - 806 SDR807 - 810 SDR811 - 814 SDR815 - 818 SDR803 - 806 SDR807 - 810 SDR811 - 814 SDR815 - 818 Dimensions prior to solder dipping SOLID STATE DEVICES, INC. Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com END TAB TEMPERATURE ( oC)