DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection This new SIDACtor® Series provides overvoltage protection GPSBQQMJDBUJPOTTVDIBT"%4- BOE#BTF5XJUIB minimal effect on data signals. This latest silicon design innovation results in capacitive loading characteristic that is compatible with these high bandwidth applications. This surface mount QFN package provides a surge capability that exceeds most worldwide intra-building standards and recommendations for lightning surge withstand capability of secondary protectors.

Description

t5*"" t5*"# t*56,&OIBODFE Level* t*56,#BTJD-FWFM t*&$ t(3*OUFSCVJMEJOH t(3*OUSBCVJMEJOH t:%5 t:%5 t:%5 Applicable Global Standards

Electrical Characteristics

@lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amps Capacitance V min V max mA min mA max A max V max SDP0640Q38B SDP06B 58 77 150 800 2.2 8 See Capacitance vs Voltage Graph SDP0720Q38B SDP07B 65 88 150 800 2.2 8 SDP0900Q38B SDP09B 75 98 150 800 2.2 8 SDP1100Q38B SDP10B 90 130 150 800 2.2 8 SDP1300Q38B SDP13B 120 160 150 800 2.2 8 SDP1800Q38B SDP18B 170 220 150 800 2.2 8 SDP2600Q38B SDP26B 220 300 150 800 2.2 8 SDP3100Q38B SDP31B 275 350 150 800 2.2 8 SDP3500Q38B SDP35B 320 400 150 800 2.2 8 Features and Benefits t$PNQBUJCMFXJUI7%4- (30MHz) t#BMBODFEPWFSWPMUBHF protection t-PXEJTUPSUJPO t-PXJOTFSUJPOMPTT t-PXQSPmMF t4NBMM40GPPUQSJOU t'BJMTTIPSUDJSDVJUXIFO surged in excess of ratings SDP Series - 5x6 QFN *Requires series resistance Pinout Designation Agency Approvals Agency Agency File Number E133083 Schematic Symbol Tip in Tip out NC NC Ground Ground Ring in Ring out Tip Ring Ground Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional (unless otherwise noted).

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection Series IPP ITSM 2x10μs 1.2x50μs/8x20μs 10x700/5x310μs 10x1000μs 600VRMS 1 Cycle A min A min A min A min ARMS B 250 230 100 75 25 Surge Ratings Thermal Considerations IH IT IS IDRM VDRMVT +V-V VS V-I Characteristics Parameter Name Test Conditions Value Units ITSM Maximum non-repetitive on-state current, 50/60 Hz 0.5s 6.5 A 1s 4.6 2s 3.4 5s 2.3 30s 1 .3 900s 0.73 50/60 Hz Ratings 0010111.0 Line Voltage (V) Capacitance (pF) Tip-Ring Tip-GND / Ring-GND Capacitance vs. Voltage Package Symbol Parameter Value Unit TJ Junction Temperature UP TSTG Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 100 °C/W 5 x 6 QFN Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP - The device must initially be in thermal equilibrium with -40°C < TJ <

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature Physical Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Soldering Parameters Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed Environmental Specifications High T emp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS 504 or 1008 hrs. MIL -STD-750 (Method 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection Part Numbering CONSTRUCTION VARIABLE IPP RATING TYPE SDP B MEDIAN VOLTAGE PACKAGE TYPE xxx 0 Q38 SIDACtor DSL Protector Part Marking Part Marking Code (Refer to Electrical Characteristics Table) Date Code XXXXXX XXXXX Dimensions — 5x6 QFN Dimension Inches Millimeters Min Max Min Max A 0.187 0.207 4.7 45 5.252 B 0.226 0.246 5.7 45 6.253 C 0.054 0.064 1 .37 4 1 .628 D 0.165 0.171 4.199 4.351 E 0.027 0.033 0.686 0.838 F 0.011 0.017 0.279 0.432 G 0.047 0.053 1 .194 1 .346 G1 0.097 0.103 2.464 2.616 H 0.032 0.038 0.800 0.953 I 0.027 0.033 0.686 0.838 J 0.100 0.106 2.540 2.692 K 0.027 0.033 0.686 0.838 L 0.015 0.021 0.381 0.533 A B PIN 1 INDICATOR F (REF) G (REF)G1 (REF) PIN 1 & 8: TIP CONNECTIONS PIN 3 & 6: GROUND CONNECTIONS PIN 4 & 5: RING CONNECTION 5 6 8 4 3I D E G G1F HK LI J C .0200 .0500 .2920 .2050 .1180 5x6 QFN Solder Pad Layout

SIDACtor® Protection Thyristors Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Broadband Optimized™ Protection Packing Options Package Type Description Quantity Added Suffix Industry Standard Q38 5x6x1 .5 QFN Tape and Reel 4000 N/A EIA-481-D T ape and Reel Specifications — 5x6 QFN A B D C N Reel Dimension W D1P2 F CARRIER TAPE COVER TAPE T E1 Tape Dimension Items TRAILER 160mm MIN LEADER 400mm MIN CARRIER TAPE COVER TAPE Tape Leader and Trailer Dimensions STARTEND Symbols Description Inches Millimeters Min Max Min Max A Reel Diameter N/A 12.992 N/A 330.0 B Drive Spoke Width 0.059 N/A 1 .50 N/A C Arbor Hole Diameter 0.504 0.531 12.80 13.50 D Drive Spoke Diameter 0.795 N/A 20.20 N/A N Hub Diameter 1 .969 N/A 50.00 N/A W1 Reel Inner Width at Hub 0.488 0.567 12.40 14.40 A0 Pocket Width at Bottom 0.204 0.212 5.20 5.40 B0 Pocket Length at Bottom 0.244 0.252 6.20 6.40 D0 Feed Hole Diameter 0.059 0.063 1 .50 1 .60 D1 Pocket Hole Diameter 0.059 N/A 1 .50 N/A E1 Feed Hole Position 1 0.065 0.073 1 .65 1 .85 E2 Feed Hole Position 2 0.400 0.408 10.15 10.35 F Feed Hole Center - Pocket Hole Center 2 0.212 0.220 5.40 5.60 K0 Pocket Depth 0.067 0.075 1 .70 1 .90 P0 Feed Hole Pitch 0.153 0.161 3.90 4.10 P1 Component Spacing 0.311 0.319 7 .90 8.10 Feed Hole Center - Pocket Hole Center 1 0.077 0.081 1 .90 2.10 T Carrier Tape Thickness 0.010 0.014 0.25 0.35 W Embossed Carrier Tape Width 0.460 0.484 11 .70 12.30 W0 Cover Tape Width 0.358 0.366 9.10 9.30