SDM5A-7P270D-N1 APACER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
‧ 7-pin SATA connector ‧ Unique Hook Design ‧ Power Cable-less Solution ‧ Perfect Solution for 1U System ‧ TRIM Command Support ‧ Write Protect by hardware switch (optional) ‧ Global Wear-Leveling and Block Management Apacer’s SDM5A (SATA Disk Module 5A) is our next generation disk-on- module (DOM) series that offers elevated speed boost and higher error correction capabilities. Built with SATA 6.0 Gb/s interface, SDM5A delivers exceptional performance in data transfer. With its SATA interface compliance and compact size, this high-speed disk module defines an ideal balance of performance, capacities, reliability and cost. SDM5A is effective in boot industrial applications and light operating systems for specific operations, while with some extra memory space for data storage. The architectural nature of SATA disk module provides higher resistance to external environmental influences and better flexibility for motherboard space. Regarding data reliability, SDM5A is built in with powerful ECC engine that can correct up to 40-bit per 1KB data. In addition, the controller unit of this DOM device supports wear-leveling, SMART and power failure management for data integrity. Wit its trustable reliability, performance and cost effectiveness, Apacer’s SDM5A is definitely the ideal storage or cache solution for embedded and industrial computers, servers and thin clients. Feature SDM5A 7P/270D N1
Interface SATA 3.0 (6Gb/s) Connector 7-pin Form Factor SATA Disk Module NAND Flash Type SLC Capacity 2GB~16GB External DRAM No Sustained Read Performance (MB/sec) Up to 65 Sustained Write Performance (MB/sec) Up to 105 ECC Engine Built-in 40-bit per 1K bytes BCH ECC Standard Operating Temperature ( °C ) 0 ~ + 70 Extended Operating Temperature ( °C ) -40 ~ + 85 Storage Temperature ( °C ) -40 ~ + 100 Housing No H/W Write Protect Optional Screw Hole Yes Cable-less Solution Optional (7+2 pin) Shock Operation: 50G, 11ms Non-operation: 1500G, 0.5ms Vibration Operation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G) Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine (compliant with MIL-STD-810G) Operating Voltage 5.0 V±5% Power Consumption Active mode: 205 mA & Idle mode: 85 mA Dimension (L x W x H ) 52.5 x 23.0 x 15.2 mm MTBF (hours) >2,000,000
Taiwan (Headquarters) Apacer Technology Inc. Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 Europe Apacer Technology B.V. Tel: +31-40-267-0000 Fax: +31-40-290-0686 U.S.A. Apacer Memory America, Inc. Tel: +1-408-518-8699 Fax: 1-510-249-9551 China Apacer Electronic(Shanghai) Co., Ltd. Tel: +86-21-6228-9939 Japan Apacer Technology Corp. Tel: +81-3-5419-2668 Fax: +81-3-5419-0018 India Apacer Technologies Pvt. Ltd. Tel: +91-80-41529061~3 Fax: +91-80-41700215 Global Presence Mechanical Specification Unit: mm DOC:20161122 For more information, contact your Apacer representative