DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR-RoHS Your Perfect Inductor Rev.1601 SDIA6020 TYPE

  • FEATURE 1. Low profile (Height: 2.00mm Max) 2. Low DC resistance
  • Applications 1. Digital camera , PDA and others
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification Part Number L(uH) Marking DCR(m ΩMax) Isat(A) Irms(A) SDIA6020-0R8N 0.8±30% 0R8 26.0 5.50 3.80 SDIA6020-1R0N 1.0±30% 1R0 30.0 4.20 3.30 SDIA6020-1R5N 1.5±30% 1R5 33.8 4.00 3.20 SDIA6020-2R2M 2.2±20% 2R2 44.2 3.20 2.70 SDIA6020-3R3M 3.3±20% 3R3 52.0 2.80 2.60 SDIA6020-4R7M 4.7±20% 4R7 75.4 2.40 2.00 SDIA6020-6R8M 6.8±20% 6R8 110.5 2.00 1.80 SDIA6020-100M 10±20% 100 162.5 1.70 1.40 SDIA6020-150M 15±20% 150 220.0 1.10 1.00 SDIA6020-220M 22±20% 220 377.0 1.05 0.95 Note1. Measurement frequency of Inductance value : at 100KHz Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. Inductance Tolerance: M : ±20% ; N : ±30% Note4. Isat : △L/L≦30%(This indicates the value of current when the inductances is 30% lower than its initial value at D.C. superimposition) 6.30REF 2.00REF 2.15REF

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR-RoHS Your Perfect Inductor Rev.1601 GENERAL CHARACTERISTICS 1. Operating temperature range: -40 TO + 105 (I ncludes temperature when the coil is heated)℃ 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper pl ate and terminals of coil. Push in two directions of X.Ywithstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100M Ω at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdow n at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: I nductance coefficient (0~2,000)x10-6/ (℃ -25~+80 ).℃ 7. Humidity characteristics(Moisture Resistance): Indu ctance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2 and 1 hour drying under normal condition.℃ 8. Vibration resistance: Inductance deviation within ±5%, af ter vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5 %, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260 , 10 seconds(See attached recommend reflow)℃ 11. Storage environment: Storage condition: Temper ature Range: 10 ~ 35 (Generally: 21 ~ 31 ) , ℃℃ ℃℃ Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range: -35 ~ 85 , Humidity Range: 50% ~ 95% RH℃℃ 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245℃ Peak 230℃ 170±10℃,60-120 S 300 250 200 150 100 T(℃) T(s) 300240180120600 Lead-free the recommended reflow condition