SDI-001 FARADAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA006d Page 1 of 2 Dec-99 (B) + Small compact design for pcb mounting + Auto 625/525 operation + 10 bit component outputs + Switchable RGB or YP b P r + Simultaneous CVBS output + Full video bandwidth filtered outputs + Re-clocked SD outputs available + NTSC Setup selection This interface card accepts D1 serial digits and provides simultaneous component (RGB or YP b P r ), and composite analogue outputs, together with separate mixed sync’s and two re-clocked serial digital D1 outputs. With other features such as the addition of mixed sync’s to analogue outputs, Beta level selection, and Narrow or wide blanking selectable via a piano switch, it is anticipated that this versatile module will provide more solutions than just interfacing to most broadcast monitors. Input Requirements Input 1 x 270 Mb/s serial NRZI (EBU TECH 3267, SMPTE RP-259M) Input Impedance 75 ohm terminating Line standard 625/50 or 525/60 Auto detection Equalisation Automatic up to 40 dB at 200 MHz (Typically 300m of Belden 8281 at 270mb/s) Component Output Characteristics Output format Selectable RGB or YP b P r Output levels 700 mV ±1% Output Impedance 75 ohms Resolution 10 bit Freq. Response < 0.2 dB to 5.5 MHz (RGB or Y), < 0.2 to 2.2 MHz(P b P r ) K-rating (2T) 1% typical Noise >70 dB rms to 5.5 MHz Composite Video Characteristics Output format CVBS Output levels 700 mV ±1% Resolution 9 bit DAC/ 8 bit signal path Freq. Response < 0.2 dB to 5.5 MHz Noise > 60 dB rms at 5.5 MHz Sync Output Characteristics Sync output amplitude 2V ±5% into 75 ohm Sync amp. on RGB or Y 300 mV ±10 mV into 75 ohm Other parameters Power + 12V ±0.25V (400 mA max) Operating Temp. 0 0 C to 40 0 C Aqueous Washable Yes ORDERING CODES Reclocked o/p’s SDI-001A x SDI-001B √ SDI-001 SERIAL D1 TO RGB/YP B P R AND CVBS MODULE
Faraday Technology Ltd. Tel: + 44 (0)1782 661501 Croft Road Industrial Estate, Fax: + 44 (0)1782 630101 Newcastle, Staffordshire Email: sales@faradaytech.co.uk FARA006d Page 2 of 2 Dec-99 (B)