SDH20HF SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Designer's Data Sheet FEATURES: AXIAL 0.6 - 1 AMPS 2000 - 6000 VOLTS HYPER FAST RECOVERY HIGH VOLTAGE RECTIFIER SDH20HF & HFSMS thru SDH60HF & HFSMS

  • Hyper Fast Recovery: 40 nsec Maximum
  • PIV to 6000 Volts
  • Hermetically Sealed Axial and Surface Mount Package
  • Void-Free Construction
  • Metallurgically Bonded
  • 175 oC Maximum Operating Temperature
  • Faster than 1N6512 thru 1N6518 and 1N6520 thru 1N6526.
  • TX, TXV , and Space Level Screening Available
  • Available in Fast and Hyper Fast versions. Contact Factory. 1.30

ELECTRICAL CHARACTERISTICS

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET # : RC0060C SURFACE MOUNT (SMS) Part Number Symbol Units Conditions SDH20HF SDH25HF SDH30HF SDH40HF SDH50HF Peak Inverse V oltage Average Rectified Current Maximum Reverse Current Maximum Surge Current (1 Cycle) Maximum Forward V oltage Maximum Reverse Recovery Time Maximum Junction Capacitance Typical Thermal Impedance PIV I 0 IR @ PIV I FSMVF 2/ CJ θθθθθJLtRR 5/ Volts A µµµµµA AmpsVolts pF oC/Wnsec 25oC2 5 oC25oC VR = 100V fT = 1MHZ L=1/8"25oC100oC2 5 oC 100 oC 1.0 40 8.2 8 400.5 1.0 502000 10 1.0 40 8.2 8 400.5 1.0 502500 10 1.0 40 8.2 8 400.5 1.0 503000 10 0.6 30 12 8 400.3 1.0 504000 8 0.6 30 12 8 400.3 1.0 505000 8 NOTES: 1. Operating and testing over 10,000 V/inch may require encapsulation or immersion in suitable dielectric material. 2. IF = I0; Maximum forward voltage measured with instantaneous forward pulse of 300µsec minimum. 3. Maximum lead/end tab temperature for soldering is 250oC, 3/8" from case for 5 sec maximum. 4. Operating and Storage temperature: -65 to +175oC.

14830 Valley View Blvd * La Mirada, Ca 90638

Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SOLID STATE DEVICES, INC. SDH60HF 0.6 30 12 8 400.3 1.0 506000 8 θθθθθ JE

CASE OUTLINE: SURFACE MOUNT SQUARE TAB (SMS) SDH20HF & HFSMS thru SDH60HF & HFSMS PACKAGE OUTLINE: AXIAL RECTIFIER DIMENSIONS DIM MIN. MAX. A 0.230 0.270" B -- .180" C 1.00" -- D .047" .053" DIMENSIONS DIM MIN. MAX. A 0.195 0.205" B .280" .320" C .020" .030" D .002" -- NOTES: Consult manufacturing for operating curves. Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SOLID STATE DEVICES, INC.