SDH05W P-DUKE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

1 www.PDUKE.com 2015/11/20 SDS05W SDH05W SERIES DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 5.04 WATTS FEATURES APPLICATIONS

  • ULTRA SMALL SMD AND DIP PACKAGE, 0.52 x 0.36x 0.40 INCH WITH REGULATED
  • SMD PACKAGE QUALIFIED FOR LEADFREE REFLOW SOLDER PR OCESS ACCORDING IPC J-STD-020D
  • NO MINIMUM LOAD REQUIRED
  • CONTINUOUS SHORT CIRCUIT PROTECTION
  • 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR O PTION
  • SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1
  • CE MARKED
  • COMPLIANT TO RoHS II & REACH
  • WIRELESS NETWORK
  • TELECOM/DATACOM
  • INDUSTRY CONTROL SYSTEM
  • MEASUREMENT EQUIPMENT
  • SEMICONDUCTOR EQUIPMENT 3000VDC ISOLATION 1600VDC ISOLATION REMOTE CONTROL SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 ഒ otherwise noted Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load Model Number VDC VDC mA mA % µF SDS(H)05-24S3P3W 9 ~ 36 3.3 1000 20 76 4400 SDS(H)05-24S05W 9 ~ 36 5 1000 30 80 2200 SDS(H)05-24S12W 9 ~ 36 12 420 30 83 1220 SDS(H)05-24S15W 9 ~ 36 15 333 30 83 1000 SDS(H)05-24S24W 9 ~ 36 24 210 30 83 470 SDS(H)05-24D05W 9 ~ 36 ±5 ±500 30 80 ±1000 SDS(H)05-24D12W 9 ~ 36 ±12 ±210 30 83 ±680 SDS(H)05-24D15W 9 ~ 36 ±15 ±168 30 84 ±440 SDS(H)05-48S3P3W 18 ~ 75 3.3 1000 10 76 4400 SDS(H)05-48S05W 18 ~ 75 5 1000 12 81 2200 SDS(H)05-48S12W 18 ~ 75 12 420 15 83 1220 SDS(H)05-48S15W 18 ~ 75 15 333 15 83 1000 SDS(H)05-48S24W 18 ~ 75 24 210 15 83 470 SDS(H)05-48D05W 18 ~ 75 ±5 ±500 15 80 ±1000 SDS(H)05-48D12W 18 ~ 75 ±12 ±210 15 83 ±680 SDS(H)05-48D15W 18 ~ 75 ±15 ±168 15 84 ±440 PART NUMBER STRUCTURE SDS05 - 48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option (VDC) (VDC) SDS : SMD type 24: 9~36 S: Single 3P3: 3.3 4:1 /filetall/filetall /filetall/filetall: Standard type SDH : DIP type 48: 18~75 05: 5 1600VDC isolation 12: 12 H: 3000VDC Isolation 15: 15 24:24 D: Dual 05:±5 12: ±12 15: ±15

2 www.PDUKE.com 2015/11/20 INPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating input voltage range 24Vin(nom) 48Vin(nom)

75 VDC

Start up time Constant resistive load Power up Remote ON/OFF 5 10 ms Input surge voltage 1 second, max. 24Vin(nom) 48Vin(nom) 50

100 VDC

Input reflected ripple current (1) 24Vin(nom) 48Vin(nom) 20 15 mAp-p Input filter Capacitor type DC-DC ON Open or high impedance Ctrl pin applied current via 1k Ω DC-DC OFF 2.0 3.0 4.0 mA Remote ON/OFF Remote off input current 2.5 mA Application circuit DC-DC ON DC-DC OFF OUTPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Voltage accuracy -1.0 +1.0 % Line regulation Low Line to High Line at Full Load -0.2 +0.2 % No Load to Full Load Single Dual -1.0 -1.0 +1.0 +1.0 Load regulation 10% Load to 90% Load Single Dual -0.5 -0.8 +0.5 +0.8 Cross regulation Asymmetrical load 25%/100% FL Dual -5.0 +5.0 % Ripple and noise Measured by 20MHz bandwidth 75 mVp-p Temperature coefficient -0.02 +0.02 %/ ഒ Transient response recovery time 25% load step change 500 µs Short circuit protection Continuous, automatics recovery GENERAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Isolation voltage 1 minute Standard Suffix ”H” 1600 3000 VDC Isolation resistance 500VDC 1 G Ω Isolation capacitance Standard Suffix ”H” 50 pF Switching frequency 100 kHz Safety meets UL60950-1 EN60950-1 IEC60950-1 Case material Non-conductive black plastic Base material Non-conductive black plastic Potting material Silicone (UL94 V-0) Weight 2.7g (0.10oz) MTBF MIL-HDBK-217F, Full load 2.281 x 10 6 hrs ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Min. Typ. Max. Unit Operating ambient temperature With derating -40 +105 ഒ Storage temperature range -55 +125 ഒ Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH Lead-free reflow solder process IPC J-STD-020D Moisture sensitivity level(MSL) IPC J-STD-033B Level 2

3 www.PDUKE.com 2015/11/20 EMC SPECIFICATIONS Parameter Conditions Level EMI (1) EN55022 Class A, Class B ESD EN61000-4-2 Air ± 8kV Contact ± 6kV Perf. Criteria A Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (2) EN61000-4-4 ± 2kV Perf. Criteria A Surge (2) EN61000-4-5 ± 1kV Perf. Criteria A Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A Power frequency magnetic field EN61000-4-8 100A/m c ontinuous; 1000A/m 1 second Perf. Criteria A Note: 1. The standard module meet EMI Class A or Class B and input reflected ripple current with external components. For further information, please contact with P-DUKE 2. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE SDS(H)05-48S05W Derating Curve SDS(H)05-48S05W Efficiency vs. Input Voltage SDS(H)05-48S05W Efficiency vs. Output Current MECHANICAL DRAWING SD S05W: SMD TYPE PIN CONNECTION PIN SINGLE DUAL 1 +Vin +Vin 2 -Vin -Vin

4 Ctrl Ctrl

5 NC -Vout

  1. All dimensions in inch (mm) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) SD H 05W: DIP TYPE