SDER041T-000 CYNTEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
CYNTEC CO., LTD. 乾坤科技股份有限公司乾坤科技股份有限公司乾坤科技股份有限公司乾坤科技股份有限公司 Sep., 2017 DOCUMENT : SDER041T-000 REVISION : A3 PAGE : 1 OF 4 Sealed Choke Coil SDER041T type /square6 Features Low profile ： 4.0mm x 4.0mm x 1.0mm Low coil resistance with large currents. High magnetic shield construction should actualize high resolution for EMC protection. 100% lead (Pb) free meet RoHS standard /square6 Application Cellular phones, LCD displays, HDDs, DVCs, DSCs, PDAs etc.. /square6 Outline Dimensions L T W Note ： This graph is in regard to outline dimensions spec. For outer appearance, please refer to actual product. Code Dimensions (mm) L 4.0 ± 0.2 W 4.0 ± 0.2 T 1.0 Max
CYNTEC CO., LTD. 乾坤科技股份有限公司乾坤科技股份有限公司乾坤科技股份有限公司乾坤科技股份有限公司 Sep., 2017 DOCUMENT : SDER041T-000 REVISION : A3 PAGE : 2 OF 4 /square6 Marking The inductor is marked with a 3-digit code Example – – 10 µ H → 100 100 /square6 Recommend Land Pattern Dimensions The customer shall determine the land dimensions shown below after confirming and safety. B C A A 3.6 B 1.8 C 4.1 Unit : mm
CYNTEC CO., LTD. 乾坤科技股份有限公司乾坤科技股份有限公司乾坤科技股份有限公司乾坤科技股份有限公司 Sep., 2017 DOCUMENT : SDER041T-000 REVISION : A3 PAGE : 3 OF 4 /square6 Specifications Part Number Inductance ( µ H ) @ (0A) Rdc ( m Ω ) Heat Rating Current DC Amps. Idc ( A ) Saturation Current DC Amps. Isat ( A ) Typical Maximum Typical Maximum Typical Maximum *： If you require another part number please contact with us. ** ： Inductance Tolerance ± 20% Note 1. ： All test data is referenced to 25 ℃ ambient. Note 2. ： Test Condition : 100KHz, 1.0Vrms Note 3. ： Idc : DC current (A) that will cause an approximate △ T of 40 ℃ Note 4. ： Isat : DC current (A) that will cause L0 to drop approximately 30% Note 5. ： Operating Temperature Range -55 ℃ to + 125 ℃ Note 6. ： The part temperature (ambient + temp rise) should n ot exceed 125 ℃ under the worst case operating conditions. Circuit design, component placement, PC B trace size and thickness, airflow and other cooli ng provision all affect the part temperature. Part temperature should be verified in the end application. Note 7. ： The rated current as listed is either the saturatio n current or the heating current depending on which value is lower.
CYNTEC CO., LTD. 乾坤科技股份有限公司乾坤科技股份有限公司乾坤科技股份有限公司乾坤科技股份有限公司 Sep., 2017 DOCUMENT : SDER041T-000 REVISION : A3 PAGE : 4 OF 4 /square6 Current Characteristic 0.00 0.30 0.60 0.90 1.20 1.50 1.80 TEMP. RISE( ℃ ) INDUCTANCE( µH) DC BIAS(Amps) SDER041T-1R5MS INDUCTANCE( µH) TEMP. RISE( ℃ ) 0.00 0.45 0.90 1.35 1.80 2.25 2.70 TEMP. RISE( ℃ ) INDUCTANCE( µH) DC BIAS(Amps) SDER041T-2R2MS INDUCTANCE( µH) TEMP. RISE( ℃ ) 0.00 0.70 1.40 2.10 2.80 3.50 4.20 TEMP. RISE( ℃ ) INDUCTANCE( µH) DC BIAS(Amps) SDER041T-3R3MS INDUCTANCE( µH) TEMP. RISE( ℃ ) 0.00 0.90 1.80 2.70 3.60 4.50 5.40 TEMP. RISE( ℃ ) INDUCTANCE( µH) DC BIAS(Amps) SDER041T-4R7MS INDUCTANCE( µH) TEMP. RISE( ℃ ) 0.00 1.50 3.00 4.50 6.00 7.50 9.00 INDUCTANCE( µH) SDER041T-6R8MS INDUCTANCE( µH) TEMP. RISE( ℃ ) 0.0 2.0 4.0 6.0 8.0 10.0 12.0 TEMP. RISE( ℃ ) INDUCTANCE( µH) DC BIAS(Amps) SDER041T-100MS INDUCTANCE( µH) TEMP. RISE( ℃ )