DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

 Low forward voltage drop  Low power loss and High efficiency  Low leakage current  High surge capability  “Green” device and RoHS compliant device

Applications

 High efficiency SMPS  Output rectification  High frequency switching  Freewheeling  DC-DC converter systems

Description

The SDB1060D is ideally suited for a full wave output rectifier in low switching power supplies, inverters and as free wheeling diodes.

Ordering Information

Device Marking Code Package Packaging SDB1060D SDB1060D TO-252 Tape & Reel Marking Information Product Characteristics IF(AV) 10A VRRM 60V VFM at 125℃ 0.55V IFSM 120A SDB1060D = Specific Device Code YWW = Year & Week Code Marking -. Y = Year Code -. WW = Week Code TO-252 Pin Configuration Pin 1, 3: Anode Pin 2, 4: Cathode

Absolute Maximum Ratings (Limiting Values) Characteristic Symbol Value Unit Maximum repetitive reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage VRRM VRWM VR 60 V Maximum average forward rectified current I F(AV) 10 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode IFSM 120 A Storage temperature range T stg -45℃ to +150 ℃ ℃ Maximum operating junction temperature T J 150 ℃ Thermal Characteristics Characteristic Symbol Value Unit Maximum thermal resistance junction to case R th(j-c) 4.0 ℃/W

Electrical Characteristics

Characteristic Symbol Test Condition Min. Typ. Max. Unit Peak forward voltage drop V FM (1) I FM = 10A Tj=25℃ - 0.55 0.65 V Tj=125℃ - 0.50 0.55 V Reverse leakage current I RM (1) V R = VRRM Tj=25℃ - - 1.5 mA Tj=125℃ - - 200 mA Junction capacitance C j V R = 4VDC, f=1MHz - 400 - pF Note : (1) Pulse test : tP≤380 ㎲, Duty cycle≤2% To evaluate the conduction losses use the following equation: PF = 0.35 IF(AV) + 0.019 IF (RMS) SDB1060D IFM

2 IF(AV)

IF(AV) VFM Forward Voltage : VFM = Vto + rd IFM Conduction Loss : PF = Vto IF(AV) + rd IF (RMS) rd Vto

Rating and Characteristic Curves Fig. 1) Typical Forward Characteristics Fig. 2) Typical Reverse Characteristics Fig. 3) Maximum Forward Derative Curve Fig. 6) Typical Junction Capacitance Fig. 4) Forward Power Dissipation SDB1060D Fig. 5) Maximum Non-Repetitive Peak Forward S u r g e C u r r e n t

※ Recommended Land Pattern (Unit: mm) Package Outline Dimension SDB1060D 4.60 1.50 2.50 7.00 7.00 Θ Θ Θ Θ

The AUK Corp. products are intended for the use as components in general electronic equipment (Office and co mmunication equipment, m easuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to th e welfare of human life(atomi c energy control, airplane, spaceship, transportation, co mbustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipm ents without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. SDB1060D