DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

 Low forward voltage drop  Low power loss and High efficiency  Low leakage current  High surge capability  Full lead-free(Pb) component and RoHS compliant device

Applications

 High efficiency SMPS  Output rectification  High frequency switching  Freewheeling  DC-DC converter systems

Description

The SDB10100PH is ideally suited for a full wave output rectifier in low switching power supplies, inverters and as free wheeling diodes.

Ordering Information

Device Marking Code Package Packaging SDB10100PH SDB10100PH TO-220F-2L Tube Marking Information Product Characteristics IF(AV) 10A VRRM 100V VFM at 125℃ 0.72V IFSM 120A AUK = Manufacture Logo ∆ = Control Code of Manufacture YMDD = Date Code Marking -. Y = Year Code -. M = Monthly Code -. D = Daily Code SDB10100PH = Specific Device Code Pin Configuration Pin 1: Cathode Pin 2: Anode

Absolute Maximum Ratings (Limiting Values) Characteristic Symbol Value Unit Maximum repetitive reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage VRRM VRWM VR 100 V Maximum average forward rectified current I F(AV) 10 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode IFSM 120 A Storage temperature range T stg -45℃ to +150 ℃ ℃ Maximum operating junction temperature T J 150 ℃ Thermal Characteristics Characteristic Symbol Value Unit Maximum thermal resistance junction to case R th(j-c) 4 ℃/W

Electrical Characteristics

Characteristic Symbol Test Condition Min. Typ. Max. Unit Peak forward voltage drop V FM (1) I FM = 10A Tj=25℃ - - 0.85 V Tj=125℃ - - 0.72 V Reverse leakage current I RM (1) V R = VRRM Tj=25℃ - - 20 uA Tj=125℃ - - 20 mA Junction capacitance C j V R = 10VDC, f=1MHz - 150 - pF Note : (1) Pulse test : tP≤380 ㎲, Duty cycle≤2% To evaluate the conduction losses use the following equation: PF = 0.68 IF(AV) + 0.032 IF (RMS) SDB10100PH IFM

2 IF(AV)

IF(AV) VFM Forward Voltage : VFM = Vto + rd IFM Conduction Loss : PF = Vto IF(AV) + rd IF (RMS) rd Vto

Rating and Characteristic Curves Fig. 1) Typical Forward Characteristics Fig. 2) Typical Reverse Characteristics Fig. 3) Maximum Forward Derative Curve Fig. 6) Typical Junction Capacitance Fig. 4) Forward Power Dissipation SDB10100PH Fig. 5) Maximum Non-Repetitive Peak Forward S u r g e C u r r e n t

The AUK Corp. products are intended for the use as components in general electronic equipment (Office and co mmunication equipment, m easuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to th e welfare of human life(atomi c energy control, airplane, spaceship, transportation, co mbustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipm ents without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. SDB10100PH