SDAH01 RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Features
SDAH01 Evaluation Board operating temperature: -40°C to 85°C Relative Humidity Sensor Module with HS3001 sensor sample mounted:
- RH accuracy: ±1.5%RH
- Operating temperature: -40 to 105°C USB key containing the IDT Demo Software:
- Data plotter
- Measurement resolution configuration
- Data export Sensor Module Extension Cable allows extending the HS3001 Sensor Module to different measurement areas SDAH01 Evaluation Kit
1.1 User Computer Requirements and Setup
1.1.1 Computer Requirements
computer to install the IDT Demo Software for the kit.
1.1.2 Software Installation and Setup
- Plug in the USB flash drive to start the setup.
- If the setup process does not start automatically, double-click on the Setup.exe file.
Figure 1. Initial Display after Installation of the IDT Demo Software
1.2 Kit Hardware Connections
A. Install the software from the USB flash drive as described in section 1.1.2. whenever data is being captured. Figure 2. Evaluation Kit Connections
2.1 Measurement Settings
and then click OK, as shown in Figure 3. See section 2.1 for the range of valid settings for these two entry fields. Figure 3. Measurement Settings settings can be changed only when no measurements are being taken. Figure 4. Set Resolution
2.2 Exporting Data
The data displayed in the plotter area can be exported in two different formats. To export the measured data points in a Microsoft Excel® compatible comma-separated text file, select Save Data from the File menu. Create a filename for the data, and select the location where the file will be saved. location, and select the file type for the image.
2.3 Data Logging Mode (Untethered)
terminal facing away from the board, as shown in Figure 5. Figure 5. Battery Installation The following steps describe how to operate the kit in the data logging mode (see Figure 2).
- To set the board to the data logging mode, put the power switch
- To start data logging, hold the “Start/Stop Logging” button
- To stop data logging, press the “Start/Stop Logging” button. The “Measuring” indicator blinks 3 times to indicate the end of data logging.
- To download the logged data to the IDT Demo Software, connect the USB port
- In the software, select Data Logging from the Tools menu and click on t he Download Data button
maximum number of measurements that can be stored on the board is 2000. Figure 6. Download Data to IDT Demo Software
User Manual for the SDAH01 Evaluation Kit for the HS3001 Humidity and Temperature Sensor © 2017 Integrated Device Technology, Inc. 7 November 16, 2017
2.4 Data Logging Settings
To change the data logging measurement interval, select Data Logging from the Tools menu, and then click on Change Interval. Enter the desired measurement interval, and click OK. The data logging resolution can be selected in the same fashion as described in section 2.1. Data logging settings can only be changed when no measurements are being taken.
2.5 Using the Plotter
9 displays the measured relative humidity and temperature data simultaneously versus time (see Figure 2). Hold the left mouse button, and drag it around an area to zoom onto that area. Hold the middle mouse or scroll button, and drag to pan across the plot area. To undo a zoom or pan operation, right click on the plot area, and select Un-Zoom (Un-Pan). The plot area can always be reset to the default view by right clicking on the plot area and selecting Undo All Zoom/Pan. To display the measurement points on the plotted curves, right click on the plot area and select Show Data Points. While moving the application window, measurements points will not be plotted.
2.6 Valid Settings Ranges
Measurement settings can be selected within the following ranges: Measurement interval: 0.5 to 3600 s. Number of measurements: 1 to unlimited. Data logging interval: 1 to 250 s. Measurement resolution: 8, 10, 12, 14 bits. 3. Ordering Information Orderable Part Number Description SDAH01 SDAH01 Evaluation Kit, including SDAH01 Evaluation Board, HS3001 sensor modules, sensor module extension cable, USB key with IDT Demo Software, USB cable, Quick Start Guide, User Manual for the SDAH01 Evaluation Kit
User Manual for the SDAH01 Evaluation Kit for the HS3001 Humidity and Temperature Sensor © 2017 Integrated Device Technology, Inc. 8 November 16, 2017 4. Revision History Revision Date Description of Change November 16, 2017 Initial release. Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 www.IDT.com Sales 1-800-345-7015 or 408-284-8200 Fax: 408-284-2775 www.IDT.com/go/sales Tech Support www.IDT.com/go/support DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the ri ght to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance specifications and operating parameters of the described products are d etermined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, includin g, but not limited to, the suitability of IDT's products for any particular purpose, an implied warranty of merchantability, or no n-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or ma lfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT p roduct in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries . Other trademarks used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary . All contents of this document are copyright of Integrated Device Technology, Inc. All rights reserved.
TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan www.renesas.com Contact Information For further information on a product, technology, the most up-to-date version of a document, or your nearest sales office, please visit: www.renesas.com/contact/ Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners. IMPORTANT NOTICE AND DISCLAIMER RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources expands or otherwise alters any applicable warranties or warranty disclaimers for these products. (Rev.1.0 Mar 2020) © 2020 Renesas Electronics Corporation. All rights reserved.