SD700C IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

High voltage ratings up to 4500V High surge current capabilities Diffused junction Hockey Puk version Case style DO-200AB (B-PUK) Typical Applications Converters Power supplies High power drives Auxiliary system supplies for traction applications Major Ratings and Characteristics IF(AV) 700 A @ T hs 55 °C IF(RMS) 1310 A @ T hs 25 °C IFSM @ 50Hz 7500 A @ 60Hz 7850 A I2t @ 50Hz 281 KA 2s @ 60Hz 257 KA 2s VRRM range 3000 to 4500 V TJ - 40 to 150 °C Parameters SD700C..L Units case style DO-200AB (B-PUK)

SD700C..L Series Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max. Type number Code peak reverse voltage repetitive peak rev. voltage@ T J = TJ max. V V mA 30 3000 3100 36 3600 3700 40 4000 4100 45 4500 4600 ELECTRICAL SPECIFICATIONS Voltage Ratings SD700C..L 50 IF(AV) Max. average forward current 700 (345) A 180° conduction, half sine wave @ Heatsink temperature 55 (85) °C Double side (single side) cooled IF(RMS) Max. RMS forward current 1310 A @ 25°C heatsink temperature double side cooled IFSM Max. peak, one-cycle forward, 7500 t = 10ms No voltage non-repetitive surge current 7850 t = 8.3ms reapplied 6310 t = 10ms 50% V RRM 6600 t = 8.3ms reapplied Sinusoidal halfwave, I2t Maximum I2t for fusing 281 t = 10ms No voltage Initial TJ = TJ max. 257 t = 8.3ms reapplied 199 t = 10ms 50% V RRM 182 t = 8.3ms reapplied I2√ t Maximum I2√t for fusing 2810 KA 2√s t = 0.1 to 10ms, no voltage reapplied V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold voltage rf1 Low level value of forward slope resistance rf2 High level value of forward slope resistance V FM Max. forward voltage drop 1.66 V Ipk= 1000A, TJ = TJ max, tp = 10ms sinusoidal wave A KA 2s 0.88 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. Parameter SD700C..L Units Conditions Forward Conduction V m Ω 0.78 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 0.99 (I > π x IF(AV)),TJ = TJ max. 0.73 (I > π x IF(AV)),TJ = TJ max.

SD700C..L Series Fig. 4 - Current Ratings Characteristics Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current Fig. 8 - Maximum Non-Repetitive Surge Current Fig. 3 - Current Ratings Characteristics Fig. 5 - Forward Power Loss Characteristics

SD700C..L Series Fig. 10 - Thermal Impedance ZthJ-hs Characteristics Fig. 9 - Forward Voltage Drop Characteristics

SD700C..L Series ΔR thJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Ordering Information Table 1 - Diode 2 - Essential part number 3 - 0 = Standard recovery 4 - C = Ceramic Puk 5 - Voltage code: code x 100 = VRRM (see Voltage Ratings Table) 6 - L = Puk Case DO-200AB (B-PUK) 1 2 3 4 5 6 Device Code SD 70 0 C 45 L Sinusoidal conductionRectangular conduction Conduction angle Units Conditions Single SideDouble Side Single SideDouble Side 180° 0.011 0.011 0.008 0.008 120° 0.014 0.015 0.014 0.014 60° 0.026 0.026 0.027 0.028 30° 0.045 0.046 0.046 0.046 TJ Max. junction operating temperature range-40 to 150 Tstg Max. storage temperature range -55 to 200 R thJ-hs Max. thermal resistance, junction 0.11 DC operation single side cooled to heatsink 0.05 DC operation double side cooled F Mounting force, ± 10% 9800 N (1000) (Kg) wt Approximate weight 250 g Case style DO-200AB(B-PUK) See Outline Table Parameter SD700C..L Units Conditions Thermal and Mechanical Specifications K/W

SD700C..L Series Outline Table Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics BOTH ENDS 0.8 (0.03) TWO PLACES 3.5(0.14) DIA. NOM. x 1.8(0.07) DEEP MIN. 34 (1.34) DIA. MAX. 58.5 (2.3 0) D IA . M A X . 26.9 (1.06) 25 .4 (1) BOTH ENDS 53 (2.09) DIA. MAX. Case Style DO-200AB (B-PUK) All dimensions in millimeters (inches)