DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FENG-JUI TECHNOLOGY CO., LTD SLIM INDUCTOR -RoHS Your Perfect Inductor Rev.1801 SD5D12 TYPE

  • FEATURE 1. Low profile and small size(Height=1.20MAX) 2. Low DC resistance 3. Magnetic Shielding type
  • Applications 1. LCD panels 2. Digital camera, others portable
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification Part Number L (uH) Marking DCR (ΩTyp.) Isat (A) Irms (A) SD5D12-R47M 0.47±20% R47 0.0246 3.86 3.19 SD5D12-1R2M 1.20±20% 1R2 0.0366 2.45 2.62 SD5D12-1R5M 1.50±20% 1R5 0.0521 2.08 2.19 SD5D12-2R2M 2.20±20% 2R2 0.0747 1.80 1.83 SD5D12-3R3M 3.30±20% 3R3 0.1043 1.42 1.55 SD5D12-4R7M 4.70±20% 4R7 0.1177 1.29 1.46 SD5D12-6R2M 6.20±20% 6R2 0.1699 1.08 1.21 SD5D12-8R2M 8.20±20% 8R2 0.2399 0.931 1.02 SD5D12-100M 10±20% 100 0.2844 0.818 0.938 SD5D12-150M 15±20% 150 0.4089 0.692 0.782 SD5D12-220M 22±20% 220 0.6338 0.574 0.628 SD5D12-330M 33±20% 330 0.9289 0.474 0.519 SD5D12-470M 47±20% 470 1.37 0.391 0.428 SD5D12-680M 68±20% 680 2.16 0.325 0.341 SD5D12-820M 82±20% 820 2.36 0.297 0.326 SD5D12-101M 100±20% 101 2.64 0.273 0.308 2.575 5.95 1.0 R2.250 2.975

FENG-JUI TECHNOLOGY CO., LTD SLIM INDUCTOR -RoHS Your Perfect Inductor Rev.1801 Part Number L (uH) Marking DCR (ΩTyp.) Isat (A) Irms (A) SD5D12-151M 150±20% 151 3.96 0.220 0.251 SD5D12-221M 220±20% 221 4.76 0.181 0.229 SD5D12-331M 330±20% 331 7.25 0.148 0.186 SD5D12-471M 470±20% 471 8.95 0.126 0.167 SD5D12-681M 680±20% 681 11.30 0.104 0.149 SD5D12-821M 820±20% 821 14.93 0.095 0.129 SD5D12-102M 1000±20% 102 17.20 0.086 0.121 Note1. Measurement frequency of Inductance value : at 100KHz, 0.25V Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. IDC : This indicates the value of current when the inductances is 20% lower than its initial Note4.Packaging: Taping ; Quantity: 1000 Piece/reel

FENG-JUI TECHNOLOGY CO., LTD SLIM INDUCTOR -RoHS Your Perfect Inductor Rev.1801 GENERAL CHARACTERISTICS 1. Operating temperature range: -40 TO + 105℃(Includes temperature when the coil is heated) 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: Inductance coefficient (0~2,000)x10-6/℃(-25~+80℃ degree Celsius), inductance deviation within±5.0%, after 96 hours. 7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2℃and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow) 11. Storage condition: Temperature Range: 0℃ ~ 35℃；-40℃ ~ 105℃ (after PCB)，Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245 ℃ Peak 230 ℃ 170 ± 10℃ ,6 0-120S 300 250 200 150 100 T( ℃ ) T(s) 300240180120600 Lead-free the recom m ended refl ow condi ti on