TS3DV520E TI | Alldatasheet
Document overview
- Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
- PDF pages: 15
Technical content
FEATURES
(TOP VIEW) GND VCC N.C. GND GND VCC GND GND SEL VCC 0B1 1B1 0B2 1B2 GND 2B1 3B1 2B2 3B2 GND VCC 4B1 5B1 4B2 5B2 GND 6B1 7B1 6B2 7B2 VCC GND N.C. GND N.C. N.C. VCC GND GND 8B1 9B1 GND 8B2 9B2 VCC GND GND
APPLICATIONS
10:20 MULTIPLEXER SWITCH FOR DVI/HDMI www.ti.com Compatible With HDMI v1.2a (Type DVI 1.0 High-Speed Digital Interface Wide Bandwidth of Over 1.65 Gbps (Bandwidth 1.9 Gbps Typ) 165-MHz Speed Operation Serial Data Stream at Pixel Clock Rate Supports All Video Formats up to 1080p and SXGA (1280 1024 at Hz) Total Raw Capacity 4.95 Gbps (Single Link) HDCP Compatible Low Crosstalk TALK dB Typ) Low Bit-to-Bit Skew sk(o) 0.1 ns Max) Low and Flat ON-State Resistance on Ω Typ, r on(flat) 0.5 Ω Typ) Low Input/Output Capacitance ON pF Typ) Rail-to-Rail Switching on Data I/O Ports to 3.6 V CC Operating Range From V to 3.6 V I off Supports Partial-Power-Down Mode Operation CC V IN Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD 14000-V Human-Body Model (A114-B, Class II) N.C. No internal connection DVI/HDMI Signal Switching Differential DVI, HDMI Signal Multiplexing for Audio/Video Receivers and High-Definition Televisions (HDTVs) The TS3DV520E is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for digital video signal switching. This device provides low and flat ON-state resistance on and excellent ON-state resistance match. Low input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable for various digital video applications, such as DVI and HDMI. This device is specified for partial-power-down I off The I off feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. Voltage on the SEL pin should be less or equal to V CC even in the power-down mode CC V). Please be aware that an important notice concerning availability, standard warranty, and use in critical sheet. PRODUCTION DATA information is current as of publication date. Copyright 2007, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
www.ti.com Digital□TV HDMI Receiver DVD□Player STB Digital□TV HDMI Receiver DVD□Player STB TS3DV520E TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI T A PACKAGE (1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING C to C TQFN Reel of 2000 TS3DV520ERHURG4 SD520E (1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. (2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com FUNCTION TABLE INPUT INPUT/OUTPUT FUNCTION SEL An L nB A n nB nB high-impedance mode H nB A n nB nB high-impedance mode PIN
DESCRIPTION
A n Data I/O nB m Data I/O SEL Select input Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3DV520E
www.ti.com A 0 0B 1 0B 2 SEL 2 48 1B 2 A 1 1B 1 3 47 A 2 2B 1 2B 2 7 43 3B 2 A 3 3B 1 8 42 A 4 4B 1 4B 2 11 37 5B 2 A 5 5B 1 12 36 A 6 6B 1 6B 2 14 32 7B 2 A 7 7B 1 15 31 A 8 8B 1 8B 2 19 22 A 9 9B 1 20 23 9B 2 TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI (POSITIVE LOGIC) Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3DV520E
www.ti.com Absolute Maximum Ratings (1) Recommended Operating Conditions (1) TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI (unless otherwise noted) MIN MAX UNIT V CC Supply voltage range 0.5 4.6 V V IN Control input voltage range (2) (3) 0.5 V CC 0.5 V V I/O Switch I/O voltage range (2) (3) (4) 0.5 V I IK Control input clamp current V IN mA I I/OK I/O port clamp current V I/O mA I I/O ON-state switch current (5) 128 mA Continuous current through V CC or GND 100 mA θ JA Package thermal impedance (6) 31.8 C/W T stg Storage temperature range 150 C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltages are with respect to ground, unless otherwise specified. (3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. (4) V I and V O are used to denote specific conditions for V I/O (5) I I and I O are used to denote specific conditions for I I/O (6) The package thermal impedance is calculated in accordance with JESD 51-7. MIN MAX UNIT V CC Supply voltage 3.6 V V IH High-level control input voltage (SEL) V CC V V IL Low-level control input voltage (SEL) 0.8 V V I/O Input/output voltage 5.5 V T A Operating free-air temperature C (1) All unused control inputs of the device must be held at V CC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs literature number SCBA004. Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3DV520E
www.ti.com Electrical Characteristics (1) Switching Characteristics Dynamic Characteristics TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI range, V CC 3.3 V 0.3 V (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (2) MAX UNIT V IK SEL V CC 3.6 I IN mA 0.7 1.2 V I IH SEL V CC 3.6 V IN V CC μ A I IL SEL V CC 3.6 V IN GND μ A I off V CC V O to 3.6 V I V IN V μ A I CC V CC 3.6 I I/O Switch ON or OFF 250 600 μ A C IN SEL f MHz, V IN 2.5 pF C OFF B port V I f MHz, Outputs open, Switch OFF pF C ON V I f MHz, Outputs open, Switch ON 9.8 pF r on V CC 1.5 V V I V CC I O mA Ω r on(flat) (3) V CC V I 1.5 V and V CC I O mA 0.7 Ω Δ r on (4) V CC 1.5 V V I V CC I O mA 0.2 1.2 Ω (1) V I V O I I and I O refer to I/O pins. V IN refers to the control inputs. (2) All typical values are at V CC 3.3 V (unless otherwise noted), T A (3) r on(flat) is the difference of r on in a given channel at specified voltages. (4) Δ r on is the difference of r on from center A ports to any other port. over recommended operating free-air temperature range, V CC 3.3 V 0.3 R L 200 Ω C L pF (unless otherwise noted) (see Figure and Figure FROM TO PARAMETER MIN TYP (1) MAX UNIT (INPUT) (OUTPUT) t pd (2) A or B B or A 0.25 ns t PZH t PZL SEL A or B 0.5 ns t PHZ t PLZ SEL A or B 0.5 ns t sk(o) (3) A or B B or A 0.05 0.1 ns t sk(p) (4) 0.05 0.1 ns (1) All typical values are at V CC 3.3 V (unless otherwise noted), T A (2) The propagation delay is the calculated RC time constant of the typical ON-state resistance of the switch and the specified load capacitance when driven by an ideal voltage source (zero output impedance). (3) Output skew between center port to A to any other port (4) Skew between opposite transitions of the same output in a given device PHL t PLH over recommended operating free-air temperature range, V CC 3.3 V 0.3 V (unless otherwise noted) PARAMETER TEST CONDITIONS TYP (1) UNIT X TALK R L 100 Ω f 250 MHz, See Figure dB O IRR R L 100 Ω f 250 MHz, See Figure dB BW R L 100 Ω See Figure 950 MHz (1) All typical values are at V CC 3.3 V (unless otherwise noted), T A Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3DV520E
www.ti.com OPERATING CHARACTERISTICS −100 −80 −60 −40 −20 Frequency (MHz) 0.1 1 100010 100 Attenuation (dB) 10,000 −12 −10 Frequency (MHz) 0.1 1 1000 10 100 Frequency (MHz) 10,000 Gain (dB) 0 1 2 3 4 5 6 VCOM (V) ron (/C0087) −100 −80 −60 −40 −20 Frequency (MHz) 0.1 1 100010 100 Attenuation (dB) 10,000 TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI r on and V vs V Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3DV520E
www.ti.com APPLICATION INFORMATION TS3DV520E 2 48 1 3 47 0B1 0B2 1B1 1B2 7 43 8 42 2B1 2B2 3B1 3B2 11 37 12 36 4B1 4B2 5B1 5B2 14 32 15 31 6B1 6B2 7B1 7B2 19 22 SEL 20 8B1 8B2 9B1 9B2 TMDS Data 0+ TMDS Data 0– TMDS Data 1+ TMDS Clock+ To HDMI Receiver TMDS Data 2– TMDS Clock– TMDS Data 1– TMDS Data 2+ TMDS Data 0+ TMDS Data 0+ TMDS Data 0– TMDS Data 0– TMDS Data 1+ TMDS Data 1+ TMDS Clock+ TMDS Clock+ HDMI Connector 1 (Single Link) HDMI Connector 2 (Single Link) TMDS Data 2– TMDS Data 2– TMDS Clock– TMDS Clock– TMDS Data 1– TMDS Data 1– TMDS Data 2+ TMDS Data 2+ Typical HDMI Connector Pin 19 Pin 1 Pin Signal Assignment
1 TMDS Data 2+
2 TMDS Data 2 Shield
3 TMDS Data 2–
4 TMDS Data 1+
5 TMDS Data 1 Shield
6 TMDS Data 1–
7 TMDS Data 0+
8 TMDS Data 0 Shield
9 TMDS Data 0–
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock–
13 CEC
14 Reserved (N.C. on device)
15 SCL
16 SDA
17 DDC/CEC Ground
19 Hot Plug Detect
The TS3DV520E can be used to switch between two digital video ports. TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3DV520E
www.ti.com PARAMETER MEASUREMENT INFORMATION C L (see Note A) TEST CIRCUIT 2 × VCC Open GND R L R L NOTES: A. C L includes probe and jig capacitance. B. W aveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. W aveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr10 MHz, ZO = 50 W , tr ≤/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr2.5 ns, tf ≤/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr2.5 ns. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. 50 Ω VG1 VCC DUT 50 Ω VIN 50 Ω VG2 50 Ω VI TEST R LS1 V∆C LVCC VI tPLZ /tPZL 3.3 V ±/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr0.3 V 2 × VCC 200 Ω GND 10 pF 0.3 V Input Generator Input Generator VO tPHZ /tPZH 3.3 V ±/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr0.3 V GND 200 Ω VCC 10 pF 0.3 V tPZL VOH −0.3 V VOLT AGE W AVEFORMS ENABLE AND DISABLE TIMES VCC /2 VCC /2 Output Control (VIN) 1.25 V 2.5 V VOH VOL +0.3 V VOH VOL 0 V 1.25 V tPZH tPLZ tPHZ Output W aveform 2 S1 at GND (see Note B) Output W aveform 1 S1 at 2 /C0121 VCC (see Note B) VOL TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI (Enable and Disable Times) Figure Test Circuit and Voltage Waveforms Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3DV520E
www.ti.com PARAMETER MEASUREMENT INFORMATION C L (see Note A) TEST CIRCUIT 2 × VCC Open GND R L R L VOH VOL VOLT AGE W AVEFORMS OUTPUT SKEW (t sk(o)) Data Out at YB 1 or YB2 NOTES: A. C L includes probe and jig capacitance. B. W aveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. W aveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr10 MHz, ZO = 50 W , tr ≤/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr2.5 ns, tf ≤/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr2.5 ns. D. The outputs are measured one at a time, with one transition per measurement. 50 Ω VG1 VCC DUT 50 Ω VIN 50 Ω VG2 50 Ω VI TEST R LS1 V∆C L 3.3 V ±/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr0.3 V VCC VI tsk(p) tsk(o) 3.3 V ±/charBnZrBnZrBnZrBnZrBnZrBnZrBnZrBnZr0.3 V Open Open 200 Ω 200 Ω VCC or GND VCC or GND 10 pF 10 pF Input Generator Input Generator VO (VOH + VOL )/2 VOH VOL Data Out at XB 1 or XB2 (VOH + VOL )/2 3.5 V 1.5 V Data In at Ax or Ay 2.5 V tPLHx tPHLx tsk(o) tsk(o) tPLHy tPHLy tsk(o) = /C0124tPLHy − tPLHx /C0124 or /C0124tPHLy − tPHLx /C0124 VOH VOL VOLT AGE W AVEFORMS PULSE SKEW (t sk(p)) Output (VOH + VOL )/2 Input 2.5 V tPLH tPHL tsk(p) = /C0124tPLH − tPLH /C0124 3.5 V 1.5 V TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI (Skew) Figure Test Circuit and Voltage Waveforms Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3DV520E
www.ti.com PARAMETER MEASUREMENT INFORMATION Network Analyzer (HP8753ES) EXT TRIGGER BIAS P1 P2 DUT A 0 SEL 0B 1 VSEL VCC VBIAS C L = 10 pF (see Note A) NOTE A: C L includes probe and jig capacitance. TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI (BW) Frequency response is measured at the output of the ON channel. For example, when V SEL and A is the input, the output is measured at All unused analog I/O ports are left open. HP8753ES setup Average RBW kHz V BIAS 0.35 V ST s dBM Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3DV520E
www.ti.com PARAMETER MEASUREMENT INFORMATION Network Analyzer (HP8753ES) R L = 100 Ω EXT TRIGGER BIAS P1 P2 DUT A 0 SEL 0B 1 VSEL VCC VBIAS A 1 1B 2 NOTES: A. C L includes probe and jig capacitance. B. A 50-Ω termination resistor is needed to match the loading of the network analyzer. 1B 1 R L = 100 Ω 2B 1 3B 1 A 2 A 3 0B 2 3B 2 2B 2 TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI channel. For example, when V SEL and A is the input, the output is measured at All unused analog input (A) ports are connected to GND, and output (B) ports are connected to GND through 50- Ω pulldown resistors. HP8753ES setup Average RBW kHz V BIAS 0.35 V ST s dBM Copyright 2007, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TS3DV520E
www.ti.com PARAMETER MEASUREMENT INFORMATION Network Analyzer (HP8753ES) R L = 100 Ω EXT TRIGGER BIAS P1 P2 DUT A 0 SEL 0B 1 VSEL VCC VBIAS 0B 2 NOTES: A. C L includes probe and jig capacitance. B. A 50-Ω termination resistor is needed to match the loading of the network analyzer. A 1 1B 1 1B 2 TS3DV520E 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI channel. For example, when V SEL V CC and A is the input, the output is measured at All unused analog input (A) ports are left open, and output (B) ports are connected to GND through 50- Ω pulldown resistors. HP8753ES setup Average RBW kHz V BIAS 0.35 V ST dBM Submit Documentation Feedback Copyright 2007, Texas Instruments Incorporated Product Folder Link(s): TS3DV520E
Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) TS3DV520ERHURG4 ACTIVE WQFN RHU 56 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 20-Mar-2008 Addendum-Page 1
(TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for design. Customers are responsible for their products and components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Clocks and Timers www.ti.com/clocks Digital Control www.ti.com/digitalcontrol Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Telephony www.ti.com/telephony RF/IF and ZigBee Solutions www.ti.com/lprf Video Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2008, Texas Instruments Incorporated