SD444-43-23-262 ADVANCEDPHOTONIX | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

FEATURES DESCRIPTION APPLICATIONS

  • Low noise
  • UV enhanced
  • Custom feedback
  • High speed SYMBOL PARAMETER MIN TYP MAX UNITS Vs Voltage Supplies ± 5 ± 15 ± 18 V Vio Input Offset Voltage 1 2 mV Vn Input Voltage Noise @ f = 10KHz 12 nV/ √Hz Iib Input Bias Current 15 40 pA Iio Input Offset Current 20 30 pA In Input Current Noise @ f = 10KHz 20 30 fA/ √Hz GBP Gain Bandwidth Product 18 MHz IS Supply Current 6.5 7 mA TSTG Storage Temperature -65 +125 °C TO Operating Temperature -40 +85 °C SYMBOL CHARACTERISTIC TEST CONDITIONS MIN TYP MAX UNITS ID Dark Current VR = 10 V 150 nA RSH Shunt Resistance VR = 0 V 15 MW VR = 0 V, f = 1 MHz 1700 CJ Junction Capacitance VR = 10 V, f = 1 MHz 340 pF lrange Spectral Application Range Spot Scan 250 1100 nm R Responsivity l= 365 nm, VR = 0 V 0.15 The SD 444-42-23-262 is a UV enhanced detector/amplifier that combines a silicon photodiode with an opamp without a feedback network, packaged in a hermetic metal can package. SPECTRAL RESPONSE 0.00 0.10 0.20 0.30 0.40 0.50 0.60 200 300 400 500 600 700 800 900 1000 1100Wavelength (nm) Responsivity (A/W) Detector/Amplifier Hybrids Without Feedback Resistor SD 444-43-23-262 PACKAGE DIMENSIONS INCH CHIP DIMENSIONS
  • Instrumentation
  • Industrial
  • Medical DETECTOR SPECIFICATIONS (TA)= 23°C UNLESS OTHERWISE NOTED AMPLIFIER SPECIFICATIONS (TA)= 23°C UNLESS OTHERWISE NOTED

1 INCH PACKAGE

Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 • www.advancedphotonix.com Detector/Amplifier Hybrids Without Feedback Resistor SD 444-43-23-262 SCHEMATIC AND CONNECTION DIAGRAM μ μ Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. 8 3 4 5 Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. 8 3 4 5 7 μ