SD400C IRF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
DISCRETE POWER DIODES and THYRISTORS DATA BOOK
SD400C..C SERIES STANDARD RECOVERY DIODES Hockey Puk Version 800A Bulletin I2084/B
Features
High voltage ratings up to 2400V High surge current capabilities Diffused junction Hockey Puk version Case style DO-200AA Typical Applications Converters Power supplies Machine tool controls High power drives Medium traction applications Major Ratings and Characteristics IF(AV) 800 A @ T hs 55 °C IF(RMS) 1435 A @ T hs 25 °C IFSM @ 50Hz 8250 A @ 60Hz 8640 A I2t @ 50Hz 340 KA 2s @ 60Hz 311 KA 2s VRRM range 400 to 2400 V TJ - 40 to 190 °C Parameters SD400C..C Units case style DO-200AA
SD400C..C Series Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max. Type number Code peak reverse voltage repetitive peak rev. voltage@ T J = TJ max. V V mA 04 400 500 08 800 900 12 1200 1300 16 1600 1700 20 2000 2100 24 2400 2500 ELECTRICAL SPECIFICATIONS Voltage Ratings SD400C..C 15 IF(AV) Max. average forward current 800(425) A 180° conduction, half sine wave @ Heatsink temperature 55(85) °C Double side (single side) cooled IF(RMS) Max. RMS forward current 1435 A @ 25°C heatsink temperature double side cooled IFSM Max. peak, one-cycle forward, 8250 t = 10ms No voltage non-repetitive surge current 8640 t = 8.3ms reapplied 6940 t = 10ms 100% V RRM 7265 t = 8.3ms reapplied Sinusoidal halfwave, I2t Maximum I2t for fusing 340 t = 10ms No voltage Initial TJ = TJ max. 311 t = 8.3ms reapplied 241 t = 10ms 100% V RRM 220 t = 8.3ms reapplied I2√ t Maximum I2√t for fusing 3400 KA 2√s t = 0.1 to 10ms, no voltage reapplied V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold voltage rf1 Low level value of forward slope resistance rf2 High level value of forward slope resistance V FM Max. forward voltage drop 1.86 V Ipk= 1930A, TJ = TJ max, tp = 10ms sinusoidal wave A KA 2s V m Ω 0.53 (I > π x IF(AV)),TJ = TJ max. 0.55 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 0.83 (I > π x IF(AV)),TJ = TJ max. 0.80 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. Parameter SD400C..C Units Conditions Forward Conduction
SD400C..C Series Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5 - Forward Power Loss Characteristics Fig. 6 - Forward Power Loss Characteristics Fig. 8 - Maximum Non-Repetitive Surge CurrentFig. 7 - Maximum Non-Repetitive Surge Current
SD400C..C Series Fig. 9 - Forward Voltage Drop Characteristics Fig. 10 - Thermal Impedance ZthJC Characteristics
SD400C..C Series Ordering Information Table 1 - Diode 2 - Essential part number 3 - 0 = standard recovery 4 - C = Ceramic Puk 5 - Voltage code: Code x 100 = VRRM (See Voltage Ratings table) 6 - C = Puk Case DO-200AA TJ Max. junction operating temperature range-40 to 190 Tstg Max. storage temperature range -55 to 200 R thJ-hs Max. thermal resistance, junction 0.163 DC operation single side cooled to heatsink 0.073 DC operation double side cooled F Mounting force, ± 10% 4900 N (500) (Kg) wt Approximate weight 70 g Case style DO-200AA See Outline Table K/W Parameter SD400C..C Units Conditions Thermal and Mechanical Specifications ΔR thJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) 1 2 3 4 5 6 Device Code SD 40 0 C 24 C Sinusoidal conductionRectangular conduction Conduction angle Units Conditions Single SideDouble Side Single SideDouble Side 180° 0.017 0.018 0.011 0.012 120° 0.020 0.020 0.020 0.020 60° 0.037 0.036 0.038 0.038 30° 0.064 0.062 0.065 0.062
SD400C..C Series Outline Table Case Style DO-200AA All dimensions in millimeters (inches) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics 0.3 (0.01) MIN. BOTH ENDS 4 2 (1.65 ) D IA . M A X . 38 (1.50) DIA. MAX. TWO PLACES 1.8 (0.07) DEEP MIN. BOTH ENDS 19(0.75) DIA. MAX. 1 4.4 (0.57) 13.7 (0.54)