SD2000C IRF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
High voltage ratings up to 1000V High surge current capabilities Diffused junction Hockey Puk version Case style DO-200AB (B-PUK) Typical Applications Converters Power supplies High power drives Auxiliary system supplies for traction applications Major Ratings and Characteristics IF(AV) 2100 A @ T hs 55 °C IF(RMS) 3900 A @ T hs 25 °C IFSM @ 50Hz 23900 A @ 60Hz 25000 A I2t @ 50Hz 2857 KA 2s @ 60Hz 2608 KA 2s VRRM range 400 to 1000 V TJ - 40 to 180 °C Parameters SD2000C..L Units case style DO-200AB (B-PUK)
SD2000C..L Series Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max. Type number Code peak reverse voltage repetitive peak rev. voltage@ T J = 180°C V V mA 04 400 500 SD2000C..L 08 800 900 60 10 1000 1100 ELECTRICAL SPECIFICATIONS Voltage Ratings IF(AV) Max. average forward current 2100 (1040) A 180° conduction, half sine wave @ Heatsink temperature 55 (85) °C Double side (single side) cooled IF(RMS) Max. RMS forward current 3900 A @ 25°C heatsink temperature double side cooled IFSM Max. peak, one-cycle forward, 23900 t = 10ms No voltage non-repetitive surge current 25000 t = 8.3ms reapplied 20100 t = 10ms 100% V RRM 21000 t = 8.3ms reapplied Sinusoidal halfwave, I2t Maximum I2t for fusing 2857 t = 10ms No voltage Initial TJ = TJ max. 2608 t = 8.3ms reapplied 2020 t = 10ms 100% V RRM 1844 t = 8.3ms reapplied I2√ t Maximum I2√t for fusing 28570 KA 2√s t = 0.1 to 10ms, no voltage reapplied V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold voltage rf1 Low level value of forward slope resistance rf2 High level value of forward slope resistance V FM Max. forward voltage drop 1.55 V Ipk= 6000A, TJ = TJ max, tp = 10ms sinusoidal wave A KA 2s 0.74 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. Parameter SD2000C..L Units Conditions Forward Conduction V m Ω 0.13 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 0.86 (I > π x IF(AV)),TJ = TJ max. 0.12 (I > π x IF(AV)),TJ = TJ max.
SD2000C..L Series Fig. 4 - Current Ratings Characteristics Fig. 5 - Forward Power Loss Characteristics Fig. 6 - Forward Power Loss Characteristics Fig. 3 - Current Ratings Characteristics Fig. 8 - Maximum Non-Repetitive Surge CurrentFig. 7 - Maximum Non-Repetitive Surge Current
SD2000C..L Series Fig. 10 - Thermal Impedance ZthJ-hs Characteristics Fig. 9 - Forward Voltage Drop Characteristics
SD2000C..L Series ΔR thJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Ordering Information Table 1 - Diode 2 - Essential part number 3 - 0 = Standard recovery 4 - C = Ceramic Puk 5 - Voltage code: Code x 100 = VRRM (see Voltage Ratings Table) 6 - L = Puk Case DO-200AB (B-PUK) 1 2 3 4 5 6 Device Code SD 200 0 C 10 L Sinusoidal conductionRectangular conduction Conduction angle Units Conditions Single SideDouble Side Single SideDouble Side 180° 0.009 0.009 0.006 0.006 120° 0.011 0.011 0.011 0.011 60° 0.020 0.020 0.021 0.021 30° 0.036 0.036 0.036 0.036 TJ Max. junction operating temperature range-40 to 180 Tstg Max. storage temperature range -55 to 200 R thJ-hs Max. thermal resistance, junction 0.073 DC operation single side cooled to heatsink 0.031 DC operation double side cooled F Mounting force, ± 10% 14700 N (1500) (Kg) wt Approximate weight 255 g Case style DO-200AB(B-PUK) See Outline Table Parameter SD2000C..L Units Conditions Thermal and Mechanical Specifications K/W
SD2000C..L Series Outline Table Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics BOTH ENDS 0.8 (0.03) TWO PLACES 3.5(0.14) DIA. NOM. x 1.8(0.07) DEEP MIN. 34 (1.34) DIA. MAX. 58.5 (2.3 0) D IA . M A X . 26.9 (1.06) 25 .4 (1) BOTH ENDS 53 (2.09) DIA. MAX. Case Style DO-200AB (B-PUK) All dimensions in millimeters (inches)