SD100-42-22-231 ADVANCEDPHOTONIX | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

FEATURES DESCRIPTION APPLICATIONS

  • Low noise
  • Blue enhanced
  • Custom feedback
  • High speed SYMBOL PARAMETER MIN TYP MAX UNITS Vs Voltage Supplies ± 5 ± 15 ± 18 V Vio Input Offset Voltage 1 2 mV Vn Input Voltage Noise @ f = 10KHz 12 nV/ √Hz Iib Input Bias Current 15 40 pA Iio Input Offset Current 20 30 pA In Input Current Noise @ f = 10KHz 20 30 fA/ √Hz GBP Gain Bandwidth Product 18 MHz IS Supply Current 6.5 7 mA TSTG Storage Temperature -65 +125 °C TO Operating Temperature -40 +85 °C SYMBOL CHARACTERISTIC TEST CONDITIONS MIN TYP MAX UNITS ID Dark Current VR = 10 V 10 nA RSH Shunt Resistance VR = 0 V 300 MW VR = 0 V, f = 1 MHz 87 CJ Junction Capacitance VR = 10 V, f = 1 MHz 18 pF lrange Spectral Application Range Spot Scan 250 1100 nm R Responsivity l= 450 nm, VR = 0 V 0.20 A/W 2 4 SPECTRAL RESPONSE 0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 200 300 400 500 600 700 800 900 1000 1100 1200W avelength (nm) Responsivity (A/W) Detector/Amplifier Hybrids Without Feedback Resistor SD 100-42-22-231 PACKAGE DIMENSIONS INCH INCH CHIP DIMENSIONS INCH The SD 100-42-22-231 is a blue enhanced detector/amplifier that combines a silicon photodiode with an opamp without a feedback network, Packaged in a hermetic TO-5 metal can package.
  • Instrumentation
  • Industrial
  • Medical DETECTOR SPECIFICATIONS (TA)= 23°C UNLESS OTHERWISE NOTED AMPLIFIER SPECIFICATIONS (TA)= 23°C UNLESS OTHERWISE NOTED TO-5 PACKAGE BLUE ENHANCED

Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 • www.advancedphotonix.com Detector/Amplifier Hybrids Without Feedback Resistor SCHEMATIC AND CONNECTION DIAGRAM SD 100-42-22-231 μ μ Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. 8 3 4 5 Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. 8 3 4 5 7 μ