SD05H1B

SD02H0B CK-COMPONENTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

H H–11 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com Specifications SWITCH FUNCTION: SPST - 2, 3, 4, 5, 6, 7, 8, 9, 10 & 12 positions CONTACT RATING: Carry: 100 mA @ 50 V DC max. Switch: 0.1 mA @ 5 V DC min to 100 mA @ 25 V DC max. MECHANICAL AND ELECTRICAL LIFE: 2,000 make-and-break cycles at full load, each circuit. CONTACT RESISTANCE: Below 50 milliohms typ. initial @ 2-4 V DC, 100mA. INSULATION RESISTANCE: 109 ohms min. DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between adjacent terminals. STORAGE TEMPERATURE: -40°C to 85°C. OPERATING TEMPERATURE: -40°C to 85°C. OPERATING FORCE: 100-700g inital. SD Series Low Profile DIP Switches PACKAGING: Thru-hole switches supplied in rigid dispensing tubes in full-tube quantities only: this may effect order quantity. Surface mount switches available in tape and reel packaging by added ‘R’ to end of part number; 1,000 pieces per r eel. Switch position 1 denotes pin number 1. All switch actuators in ‘OFF’ position, standard. Materials CASE & COVER: Thru-hole: polyester (PBT). Surface mount: (PPA), flame retardant (UL 94V-0). ACTUATOR: Nylon, flame retardant (UL 94V-0) CONTACTS: BeCu with gold plate. TERMINALS: Bright tin-plated brass. TERMINAL SEAL: All terminals insert molded. TAPE SEAL: Polyimide. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Features/Benefits

• Low profile design saves space
• Thru-hole and surface mount models
• Tape and reel packaging available
• Sealed with top tape
• RoHS compliant Typical Applications
• Address switch for industrial controls
• Logic switching for computers and peripherals
• Function controlling for numerous applications Number of Positions SD02 SD07 SD03 SD08 SD04 SD09 SD05 SD10 SD06 SD12 Actuator H0 Flush Actuator H1 Extended Actuator Terminals S Surface Mount (None) PC ThruHole Contact Material B Gold Process Seal (None) tape seal D No tape seal Packaging (None) Tubes R Tape and Reel DS B Build-A-Switch How To Order Complete part numbers for SD Series ar e shown on pages H–11 through H–13. All switches supplied in “OFF” position in rigid dispensing tubes or tape and reel packaging.

H H–12 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com 1 8765432 ORIENTATION MARK PEELABLE TAPE SEAL .300 (7,62) .390 (9,91) .010 TYP. (0,25) STANDOFF .027 (0,70) ACTUATOR TRAVEL .142 (3,62) .263 (6,68) DIM. 'A' SEE CHART .315 TYP. (8,00) .160 (4,06) WITH TAPE .100 TYP. (2,54).022 TYP. (0,55) .010 TYP. (0,25) .243 TYP. (6,17) .044 MIN. (1,12) .100 (2,54) TYP. .435 MIN. (11,05) 18 765432 .010 TYP. (0,25) .023 TYP. (0,60) STANDOFF .027 (0,70) ACTUATOR TRAVEL .142 (3,62) .263 (6,68) DIM. 'A' SEE CHART .325 TYP. (8,25) .315 TYP. (8,00) .168 TYP. (4,30) .126 TYP. (3,20) .100 TYP. (2,54).022 TYP. (0,55) .059 TYP. (1,50) .010 TYP. (0,25) PEELABLE TAPE SEAL ORIENTATION MARK .100 (2,54) TYP. .300 TYP. (7,6)Ø.038 (0,97) TYP. SD Series Low Profile DIP Switches Sealed Flush Actuator – With Top Tape, Surface Mount Terminals Sealed Extended Actuator – With Top Tape, Thru-hole Terminals RoHS NO. QUANTITY PART NUMBER POS. DIM. ‘A’ PER TUBE SD02H0SB 2 .258 (6,55) 85 SD03H0SB 3 .358 (9,09) 60 SD04H0SB 4 .458 (11,63) 45 SD05H0SB 5 .558 (14,17) 40 SD06H0SB 6 .658 (16,71) 30 SD07H0SB 7 .758 (19,25 25 SD08H0SB 8 .858 (21,79) 25 SD09H0SB 9 .958 (24,33) 20 SD10H0SB 10 1.058 (26,87) 20 SD12H0SB 12 1.258 (31,95) 15 Schematic SPST RoHS NO. QUANTITY PART NUMBER POS. DIM. ‘A’ PER TUBE SD02H1B 2 .258 (6,55) 85 SD03H1B 3 .358 (9,09) 60 SD04H1B 4 .458 (11,63) 45 SD05H1B 5 .558 (14,17) 40 SD06H1B 6 .658 (16,71) 30 SD07H1B 7 .758 (19,25 25 SD08H1B 8 .858 (21,79) 25 SD09H1B 9 .958 (24,33) 20 SD10H1B 10 1.058 (26,87) 20 SD12H1B 12 1.258 (31,95) 15 Schematic SPST Sealed Flush Actuator – With Top Tape, Thru-hole Terminals Process sealed - withstands soldering and cleaning processes 1 8765432 .010 TYP. (0,25) .023 TYP. (0,60) STANDOFF .027 (0,70) ACTUATOR TRAVEL .142 (3,62) .263 (6,68) DIM. 'A' SEE CHART .325 TYP. (8,25) .315 TYP. (8,00) .168 TYP. (4,30) .126 TYP. (3,20) .100 TYP. (2,54).022 TYP. (0,55) .059 TYP. (1,50) PEELABLE TAPE SEAL ORIENTATION MARK .100 (2,54) TYP. .300 TYP. (7,6)Ø.038 (0,97) TYP. ROHS NO. QUANTITY PART NUMBER POS. DIM. ‘A’ PER TUBE SD02H0B 2 .258 (6,55) 85 SD03H0B 3 .358 (9,09) 60 SD04H0B 4 .458 (11,63) 45 SD05H0B 5 .558 (14,17) 40 SD06H0B 6 .658 (16,71) 30 SD07H0B 7 .758 (19,25 25 SD08H0B 8 .858 (21,79) 25 SD09H0B 9 .958 (24,33) 20 SD10H0B 10 1.058 (26,87) 20 SD12H0B 12 1.258 (31,95) 15 Schematic SPST

H H–13 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com TAPE & REEL PACKAGING – SURFACE MOUNT OPTIONS ONLY SD Series Low Profile DIP Switches FEED DIRECTION DIM ‘D’ SEE CHART DIM ‘C’ SEE CHART DIM ‘G’ SEE CHART .069 (1,75) DIM ‘P’ SEE CHART .061 DIA (1,55) DIM ‘B’ SEE CHART .079 (2,00) .057 (4,00) DIM ‘A’ SEE CHART ELONGATED HOLES ON SD07-SD12 ONLY SWITCH NO. DIM ’A’ POCKET LENGTH @ BOTTOM DIM ’B’ POCKET LENGTH @ BOTTOM DIM ’C’ TAPE WIDTH DIM ’D’ POCKET DEPTH DIM ’G’ SPROCKET HOLE SPACING DIM ’P’ PITCH BETWEEN POCKETS SD02 SD03 SD04 SD05 SD06 SD07 SD08 SD09 SD10 SD12 .472(12,0) .472(12,0) .472(12,0) .472(12,0) .472(12,0) .472(12,0) .472(12,0) .472(12,0) .472(12,0) .472(12,0) .177(4,5) .177(4,5) .177(4,5) .177(4,5) .177(4,5) .177(4,5) .177(4,5) .177(4,5) .177(4,5) .177(4,5) N/A N/A N/A N/A N/A 1.118(28,4) 1.591(40,4) 1.591(40,4) 1.591(40,4) 1.591(40,4) .413(10,5) .406(10,3) .429(10,9) .406(10,3) .406(10,3) .406(10,3) .406(10,3) .406(10,3) .406(10,3) .406(10,3) .630(16,0) .630(16,0) .954(24,0) .954(24,0) .954(24,0) 1.260(32,0) 1.732(44,0) 1.732(44,0) 1.732(44,0) 1.732(44,0) .315(8,0) .406(10,3) .476(12,1) .602(15,3) .701(17,8) .803(20,4) .854(21,7) 1.028(26,1) 1.055(26,8) 1.303(33,1) Reel Information Outside diameter 13.00 (333,0) Pilot hole .512 (13,0) RoHS NO. QUANTITY PART NUMBER POS. DIM. ‘A’ PER REEL SD02H0SBR 2 .258 (6,55) 1000 SD03H0SBR 3 .358 (9,09) 1000 SD04H0SBR 4 .458 (11,63) 1000 SD05H0SBR 5 .558 (14,17) 1000 SD06H0SBR 6 .658 (16,71) 1000 SD07H0SBR 7 .758 (19,25 1000 SD08H0SBR 8 .858 (21,79) 1000 SD09H0SBR 9 .958 (24,33) 1000 SD10H0SBR 10 1.058 (26,87) 1000 SD12H0SBR 12 1.258 (31,95) 1000 Schematic SPST 18 765432 ORIENTATION MARK PEELABLE TAPE SEAL .300 (7,62) .390 (9,91) .010 TYP. (0,25) STANDOFF .027 (0,70) ACTUATOR TRAVEL .142 (3,62) .263 (6,68) DIM. 'A' SEE CHART .315 TYP. (8,00) .170 (4,31) WITH TAPE .100 TYP. (2,54).022 TYP. (0,55) .010 TYP. (0,25) .243 TYP. (6,17) .044 MIN. (1,12) .100 (2,54) TYP. .435 MIN. (11,05) .010 TYP. (0,25) Sealed Extended Actuator – With Top Tape, Surface Mount Terminals RoHS NO. QUANTITY PART NUMBER POS. DIM. ‘A’ PER TUBE SD02H1SB 2 .258 (6,55) 85 SD03H1SB 3 .358 (9,09) 60 SD04H1SB 4 .458 (11,63) 45 SD05H1SB 5 .558 (14,17) 40 SD06H1SB 6 .658 (16,71) 30 SD07H1SB 7 .758 (19,25 25 SD08H1SB 8 .858 (21,79) 25 SD09H1SB 9 .958 (24,33) 20 SD10H1SB 10 1.058 (26,87) 20 SD12H1SB 12 1.258 (31,95) 15 Schematic SPST