SDSWITCH CK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Dimensions are shown inch (mm) Dimensions subject to change www.ittcannon.comH-7 DIP H How To Order Complete part numbers for SD Series are shown on pages H-7 thru H-8. All switches supplied in “OFF ” position in rigid dispensing tubes or tape and reel packaging. Specifications SWITCH FUNCTION: SPST - 2, 3, 4, 5, 6, 7, 8, 9, 10 & 12 positions CONTACT RATING: Carry: 100 mA @ 50 V DC max. Switch: 0.1 mA @ 5 V DCmin to 100 mA @ 25 V DC max. MECHANICAL AND ELECTRICAL LIFE: 2,000 make-and-break cycles at full load, each circuit. CONTACT RESISTANCE: Below 50 milliohms typ. initial @ 2-4 V DC, 100mA. INSULATION RESISTANCE: 10 9 ohms min. DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between adjacent terminals. STORAGE & OPERATING TEMPERATURE: -40 °C to 85°C. OPERATING TEMPERATURE: -20 °C to 85°C. QUANTITY PART NUMBER NO.POS. DIM. ‘A’ PER TUBE SD02H0K 2 .258 (6,55) 85 SD03H0K 3 .358 (9,09) 60 SD04H0K 4 .458 (11,63) 45 SD05H0K 5 .558 (14,17) 40 SD06H0K 6 .658 (16,71) 30 SD07H0K 7 .758 (19,25) 25 SD08H0K 8 .858 (21,79) 25 SD09H0K 9 .958 (24,33) 20 SD10H0K 10 1.058 (26,87) 20 SD12H0K 12 1.258 (31,95) 15 Schematic SPST C&K SD Series Low Profile DIP Switches PACKAGING: Thru-hole switches supplied in rigid dispensing tubes in full-tube quantities only: this may effect order quantity. Surface mount switches available in tape and reel packaging by added ‘R ’ to end of part number; 1,000 pieces per reel. Switch position 1 denotes pin number 1. All switch actuators in ‘OFF ’position, standard. Materials CASE & COVER: Thru-hole: polyester (PBT). Surface Mount: (PPA), flame retardant (UL 94V-0). ACTUATOR: Nylon, flame retardant (UL 94V-0) CONTACTS: Copper alloy with gold plate. TERMINALS: Copper alloy with tin lead plate. TERMINAL SEAL: All terminals insert molded. TAPE SEAL: Polyester NOTE : Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Features/Benefits

  • Low profile design saves space
  • Thru-hole and surface mount models
  • Tape and reel packaging available
  • Sealed with top tape Sealed Flush Actuator - With Top Tape, Thru-hole Terminals Process sealed - withstands soldering and cleaning processes 18 765432 .010 TYP. (0,25) .023 TYP. (0,60) STANDOFF .027 (0,70) ACTUATOR TRAVEL .142 (3,62) .263 (6,68) DIM. 'A' SEE CHART .325 TYP. (8,25) .315 TYP. (8,00) .168 TYP. (4,30) .126 TYP. (3,20) .100 TYP. (2,54) .022 TYP. (0,55) .059 TYP. (1,50) PEELABLE TAPE SEAL ORIENTATION MARK .100 (2,54) TYP. .300 TYP. (7,6)Ø .038 (0,97) TYP. Typical Applications
  • Address switch for industrial controls
  • Logic switching for computers and peripherals
  • Function controlling for numerous applications Third Angle Projection

Dimensions are shown in inch (mm ) Dimensions subject to change www.ittcannon.comH-8 DIP H 18 765432 ORIENTATION MARK PEELABLE TAPE SEAL .300 (7,62) .390 (9,91) .010 TYP. (0,25) STANDOFF .027 (0,70) ACTUATOR TRAVEL .142 (3,62) .263 (6,68) DIM. 'A' SEE CHART .315 TYP. (8,00) .160 (4,06) WITH TAPE .100 TYP. (2,54) .022 TYP. (0,55) .010 TYP. (0,25) .243 TYP. (6,17) .044 MIN. (1,12) .100 (2,54) TYP. .435 MIN. (11,05) .010 TYP. (0,25) 18 765432 ORIENTATION MARK PEELABLE TAPE SEAL .300 (7,62) .390 (9,91) .010 TYP. (0,25) STANDOFF .027 (0,70) ACTUATOR TRAVEL .142 (3,62) .263 (6,68) DIM. 'A' SEE CHART .315 TYP. (8,00) .160 (4,06) WITH TAPE .100 TYP. (2,54) .022 TYP. (0,55) .010 TYP. (0,25) .243 TYP. (6,17) .044 MIN. (1,12) .100 (2,54) TYP. .435 MIN. (11,05) 18 765432 .010 TYP. (0,25) .023 TYP. (0,60) STANDOFF .027 (0,70) ACTUATOR TRAVEL .142 (3,62) .263 (6,68) DIM. 'A' SEE CHART .325 TYP. (8,25) .315 TYP. (8,00) .168 TYP. (4,30) .126 TYP. (3,20) .100 TYP. (2,54) .022 TYP. (0,55) .059 TYP. (1,50) .010 TYP. (0,25) PEELABLE TAPE SEAL ORIENTATION MARK .100 (2,54) TYP. .300 TYP. (7,6)Ø .038 (0,97) TYP. C&K SD Series Low Profile DIP Switches QUANTITY PART NUMBER NO.POS. DIM. ‘A’ PER TUBE SD02H0SK 2 .258 (6,55) 85 SD03H0SK 3 .358 (9,09) 60 SD04H0SK 4 .458 (11,63) 45 SD05H0SK 5 .558 (14,17) 40 SD06H0SK 6 .658 (16,71) 30 SD07H0SK 7 .758 (19,25) 25 SD08H0SK 8 .858 (21,79) 25 SD09H0SK 9 .958 (24,33) 20 SD10H0SK 10 1.058 (26,87) 20 SD12H0SK 12 1.258 (31,95) 15 Schematic SPST Sealed Flush Actuator – With Top Tape, Surface Mount Terminals Sealed Extended Actuator – With Top Tape, Thru-hole Terminals QUANTITY PART NUMBER NO.POS. DIM. ‘A’ PER TUBE SD02H1K 2 .258 (6,55) 85 SD03H1K 3 .358 (9,09) 60 SD04H1K 4 .458 (11,63) 45 SD05H1K 5 .558 (14,17) 40 SD06H1K 6 .658 (16,71) 30 SD07H1K 7 .758 (19,25) 25 SD08H1K 8 .858 (21,79)) 25 SD09H1K 9 .958 (24,33) 20 SD10H1K 10 1.058 (26,87) 20 SD12H1K 12 1.258 (31,95) 15 Schematic SPST Sealed Extended Actuator – With Top Tape, Surface Mount Terminals QUANTITY PART NUMBER NO.POS. DIM. ‘A’ PER TUBE SD02H1SK 2 .258 (6,55) 85 SD03H1SK 3 .358 (9,09) 60 SD04H1SK 4 .458 (11,63) 45 SD05H1SK 5 .558 (14,17) 40 SD06H1SK 6 .658 (16,71) 30 SD07H1SK 7 .758 (19,25) 25 SD08H1SK 8 .858 (21,79)) 25 SD09H1SK 9 .958 (24,33) 20 SD10H1SK 10 1.058 (26,87) 20 SD12H1SK 12 1.258 (31,95) 15 Schematic SPST Third Angle Projection

Dimensions are shown inch (mm) Dimensions subject to change www.ittcannon.comH-9 DIP H C&K SD Series Low Profile DIP Switches TAPE & REEL PACKAGING - SURFACE MOUNT OPTIONS ONLY Reel Information Outside diameter 13.00 (333,0) Pilot hole .512 (13,0) Third Angle Projection QUANTITY PART NUMBER DIM. ‘W ’ PER REEL SD02H0SKR .630 (16,0) 1000 SD03H0SKR .630 (16,0) 1000 SD04H0SKR .945 (24,0) 1000 SD05H0SKR .945 (24,0) 1000 SD06H0SKR 1.26 (32,0) 1000 SD07H0SKR 1.26 (32,0) 1000 SD08H0SKR 1.73 (44,0) 1000 SD09H0SKR 1.73 (44,0) 1000 SD10H0SKR 1.73 (44,0) 1000 SD12H0SKR 1.73 (44,0) 1000