DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • ESD, IEC61000-4-2, ±30kV contact, ±30kV air
  • EFT , IEC61000-4-4, 50A (5/50ns)
  • Lightning, IEC61000-4-5, 30A (tP=8/20μs)
  • Low clamping voltage
  • Low leakage current
  • Small SOD323 package fits 0805 footprints
  • Switches / Buttons
  • Test Equipment / Instrumentation
  • Point-of-Sale Terminals
  • Medical Equipment
  • Notebooks / Desktops / Servers
  • Computer Peripherals Pinout and Functional Block Diagram Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. RoHS Pb GREENSD05C Series 450W Discrete bidirectional TVS Diode Additional Information Datasheet SamplesResources

© 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/24/13 TVS Diode Arrays (SPA® Diodes) General Purpose ESD Protection - SD05C Series Notes: CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 30 A Ppk Peak Pulse Power (tp=8/20μs) 450 W TOP Operating Temperature –40 to 125 °C TSTOR Storage Temperature –55 to 150 °C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units Reverse Voltage Drop VR IR=1mA 6 V Reverse Standoff Voltage VRWM IR≤1μA 5.0 V Leakage Current ILEAK VR=5V 1. 0 μA Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 9.7 V IPP=2A, tp=8/20µs, Fwd 10.3 V IPP=10A, tP=8/20μs, Fwd 13.5 V IPP=24A, tP=8/20μs, Fwd 18.0 V Dynamic Resistance RDYN (VC2 - VC1) / (IPP2 - IPP1) 0.6 Ω ESD Withstand Voltage1 VESD IEC61000-4-2 (Contact Discharge) ±30 kV IEC61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CD Reverse Bias=0V , f=1MHz 200 pF Note: 1Parameter is guaranteed by design and/or device characterization. Thermal Information Parameter Rating Units Storage Temperature Range –55 to 150 °C Maximum Junction Temperature 150 °C Maximum Lead Temperature (Soldering 20-40s) 260 °C Non-Repetitive Peak Pulse Power vs. Pulse Time Pulse Duration - tp (µs) Peak Pulse Power - P pk (kW) 0.01 0.1 0.11 10 100 1000 Capacitance vs. Reverse Bias Bias Voltage (V) Capacitance (pF) 0.0 50.0 100.0 150.0 200.0 250.0 300.0

© 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/24/13 TVS Diode Arrays (SPA® Diodes) General Purpose ESD Protection - SD05C Series Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Percent of IPP Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Product Characteristics Lead Plating Matte Tin Lead Material Copper Alloy Lead Coplanarity 0.0004 inches (0.102mm) Substitute Material Silicon Body Material Molded Epoxy Flammability UL 94 V-0 Notes : 1 . All dimensions are in millimeters 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. 5. Package surface matte finish VDI 11-13. Power Derating Curve 100 110 02 55 07 51 00 1251 50 Ambient Temperature - TA (oC) % of Rated Power I PP

© 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/24/13 TVS Diode Arrays (SPA® Diodes) General Purpose ESD Protection - SD05C Series Symbol SOD323 Millimeters Inches Min Max Min Max A 1. 0 0 0.039 A1 0.00 0.10 0.000 0.004 A2 0.80 0.90 0.031 0.035 b 0.25 0.35 0.010 0.014 c 0.08 0.15 0.003 0.006 D 1 .20 1 .40 0.047 0.055 E 1 .60 1 .80 0.063 0.071 E1 2.50 2.70 0.098 0.106 L 0.475 REF 0.019 REF L1 0.25 0.40 0.010 0.016 Ø 0º 8º 0º 8º E b c D L L A1 A2 A 0.2

Ordering Information

Part Number Package Marking Min. Order Qty. SD05C-01FTG SOD323 G 3000 Part Numbering SystemPart Marking System SD05C 01 T G Series Number of Channels Package T= Tape & Reel G= Green F: SOD323 F TVS Diode Arrays (SPA® Diodes)G Embossed Carrier T ape & Reel Specification — SOD323 4.00 2.00 A A 4.00 B B ø1.50 1.753.50 8.00 1.25 Cover Tape 2.90 B-B 0.254 1.46 A-A ø178 12.3 9.5 12.3 54.4 R78.0 R25.6 R25.6 R6.5 3000 2500 2000 1500 1000 500