SD0060CN02270T APITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

60 MHz SAW Differential delay Line

6 MHz Bandwidth

Part Number: SD0060CN02270T Spectrum Microwave

400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401

www.SpectrumMicrowave.com DSSD0060CN02270T Rev B 9-Feb-2010 ECN 36650 Page 1 of 3

DESCRIPTION

  • 60 MHz SAW differential delay line with 6 MHz bandwidth.
  • 22.1 x 12.7 mm DIP.
  • RoHS compliant. TYPICAL PERFORMANCE Horizontal: Frequency : 5 MHz/div Vertical from top: Relative Magnitude : 10 dB/div Relative magnitude : 1 dB/div Phase Linearity : 5 deg/div Group Delay Deviation : 50 ns/div

Part Number: SD0060CN02270T Spectrum Microwave www.SpectrumMicrowave.com DSSD0060CN02270T Rev B 9-Feb-2010 ECN 36650 Page 2 of 3 SPECIFICATION Parameter Min Typ Max Units Center Frequency (Fc) 1 - 60.00 - MHz Insertion Loss at 60 MHz - 31 34 dB Amplitude Variation (57.0 to 63.0 MHz) - 2.1 3 dB p-p Delay Time of Short Path 0.620 0.650 0.680 usec Delay Time of Long Path 0.870 0.900 0.930 usec Lower 3dB Band Edge - 56.35 57.00 MHz Upper 3dB Band Edge 63.00 63.95 - MHz Short/Long Path Integration Loss Difference - 1.3 2.0 dB Average Differential Delay (Pins 1 to 7) 248 250 252 nsec Temperature Coefficient of Delay - 23 - ppm/°C Source and Load Impedance - 50 - Ω Ambient Temperature - 25 - ° C Notes: 1. All specified bandwidths are referenced to this frequency. MAXIMUM RATINGS Parameter Min Max Units Storage Temperature Range -55 85 ˚C Operating Temperature Range -55 85 ˚C Input Power Level 15 dBm MATCHING CIRCUIT Typical component values: (Minimum inductor Q = 40) Notes: 1. Recommend use of 2% tolerance matching components. 2. Component values may change depending on board layout. Ls1 = 330 nH Ls2 = 390 nH Ls3 = 390 nH 8 7 14 1 Input 50 Ω Single-ended Short delay Output 50 Ω Single-ended GND Long Delay Output 50 Ω Single-ended

Part Number: SD0060CN02270T Spectrum Microwave www.SpectrumMicrowave.com DSSD0060CN02270T Rev B 9-Feb-2010 ECN 36650 Page 3 of 3 PACKAGE OUTLINE ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Units: mm Tolerances are ±0.15 mm except for the overall length, width and pad dimensions, which are nominal values. Pin Configuration: Input: 8 Output (short Delay): 7 Output (Long delay): 1 Ground: 2,9,14