DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

 Repetitive Peak Off-State Voltage : VDRM=600V  R.M.S On-State Current : IT(RMS)=8A  Gate trigger current : IGT=40mA max (Mode Ⅰ-Ⅱ-Ⅲ)  High Commutation: (dI/dt)C =4.0 A/㎳(Min)

Applications

 Switching mode power supply, light dimmet  TV sets, stereo, refrigerator, washing machine  Electric blanket, solenoid driver, small motor control  Photo copier, electric tool

Ordering Information

Device Marking Code Package Packaging SCT08N60FD SCT08N60 TO-220F-3L Tube Absolute Maximum Ratings (Limiting Values) Characteristic Symbol Value Unit Repetitive Peak Off-state Voltage V DRM 600 V RMS on-state current (full sine wave) I T(RMS) 8 A Non- repetitive surge peak on-state current (full cycle, Tj initial = 25℃) ITSM 84 A I2t Value for fusing I 2t 36 A 2s Peak gate current I GM 4 A Peak gate power dissipation P GM 5 W Average gate peak dissipation P G(AV) 1 W Storage temperature range T stg -40 to +150 ℃ Operating junction temperature range T j -40 to +125 ℃ Product Characteristics Symbol Rating IT(RMS) 8A VDRM 600V AUK ΔYMDD SDB20D45 AUK ΔYMDD SDB20D45 Column 1 : Manufacture Logo Column 2 : Production Information - △ : Factory Management Code - YMDD : Date Code(Year, Month, Date) Column 3 : Device code TO-220F-3L 1 2 3 Marking Diagram AUK △YMDD SCT08N60

Characteristic Symbol Value Unit Maximum thermal resistance junction to case (AC) R th(j-c) 4.9 ℃/W Maximum thermal resistance junction to ambient (AC) R th(j-a) 60 ℃/W Electrical Characteristics (TJ=25℃, unless otherwise specified) Off Characteristics Characteristic Symbol Test Condition Min. Typ. Max. Unit Repetitive peak Off-state current I DRM V D = VDRM - - 5 uA Repetitive peak reverse current I RRM V R = VRRM - - 5 μA On Characteristics Characteristic Symbol Test Condition Min. Typ. Max. Unit Peak On-state voltage V TM I T = 11A - - 1.55 V Holding current I H V D = 12V, IT = 0.2A - - 50 mA Gate trigger current IGT (Ⅰ-Ⅱ-Ⅲ) VD = 12V, RL = 30Ω - - 40 mA IGT (Ⅳ) - - - - mA Gate trigger voltage VGT (Ⅰ-Ⅱ-Ⅲ) VD = 12V, RL = 30Ω - - 1.3 V Gate Non-trigger voltage V GD V D = 2/3 VDRM, Tj=125℃ 0.2 - - V Dynamic Characteristics Characteristic Symbol Test Condition Min. Typ. Max. Unit Critical rate of rise of Off-state Voltage (dV/dt)S V D = 2/3 VDRM, Tj=125℃ 1000 - - V/ μS Rate of Change of Commutation Current (dI/dt)C (dV/dt)C=10V/㎲↓, Critical rate of rise of on-state current dI/dt f=120hz, IG = 2×IGT SCT08N60FD Simple circuit for (dV/dt)S Simple circuit for (dI/dt)C vs (dV/dt)C Simple circuit for dI/dt

Electrical Characteristic Curves AW Fig. 6 I T - IGT Fig. 1 P – I T(RMS) Fig. 4 (dI/dt) C - (dV/dt)C Fig. 2 I T(RMS) – TC Fig. 5 I GT- Tj Fig. 3 I T - VT A SCT08N60FD

Electrical Characteristic Curves Fig. 8 I T - VGT Fig. 7 V GT- Tj Fig. 9 I H- VT

Package Outline Dimensions

The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication e quipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of hum an life(atomic energy control, airplane, spaceship, transportation, co mbustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipm ents without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice.