SCL-RHYTHM

SCL-RHYTHM ELMA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 18

Technical content

M.2 NVMe Mass Storage & Quad M12 Gigabit Ethernet Networking Mezzanine I/O Expansion Board (CPU Side Card) Document No. 8856 • 23 October 2018

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet General The SCL-RHYTHM is a mezzanine side card for EKF CPU boards, provided with a socket for a PCI Express® based M.2 mass storage module, and four independent Gigabit Ethernet controllers for universal networking. The SCL-RHYTHM is suitable for EKF CPU cards such as the SC4-CONCERTO or SC5-FESTIVAL, which are equipped with two HSE (high speed expansion) mezzanine connectors, for eight PCIe® Gen3 lanes. The M.2 socket can accommodate an NVMe type SSD module up to the 2280 form factor, with a PCIe ® x4 Gen3 interface for superior data transfer rates. When used as main mass storage device, the NVMe SSD can speed up the overall system performance dramatically. Four I210-IT networking controllers supporting TSN Gigabit Ethernet are wired to X-coded M12 front panel connectors, for rugged applications such as railway and transportation. © E K F - 2 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet

Features

< Mixed function mezzanine side card for EKF CompactPCI® Serial CPU boards < Based on new mezzanine connectors HSE1/HSE2 (8 x PCIe® Gen3) < Suitable e.g. for use with CPU cards SC4-CONCERTO or SC5-FESTIVAL < Provides Gigabit Ethernet front panel I/O (4 x M12-X) < Provides mass storage capability (M.2 NVMe) < 8HP assembly together with CPU card < Proprietary PCB dimensions for optimized CPU card processor heat sink Front Panel I/O < 4 x M12 X-coded front panel GbE receptacles, rail approved, Cat6A, IEC 61076-2-109 < 1000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate front ports < Future proof investment into cabling infrastructure - up to 10Gbps with M12 Cat6A < M12 X-coded to RJ45 connector Cat6A cable assemblies available from several suppliers Networking < Four individual networking interface controllers (NIC), based on PCI Express® < 1000BASE-T, 100BASE-TX, 10BASE-T connections < Intel® I210-IT -40°C to +85°C operating temperature GbE controllers w. integrated PHY < IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet < IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensitive streams (TSN) < IEEE 1588 and 802.1AS packets time stamping for high-precision time synchronization < All GbE ports wired via M12 X-coded front panel connectors On-Board Mass Storage < M.2 (formerly known as NGFF) socket for an NVMe type SSD module up to 2280 size < PCI Express® Gen3 x4 interface (M-key socket) < Socket height 4.2H (double sided module allowed) < Capacity up to 2TB as of current < Suitable for operating system installation (boot device) © E K F - 3 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet Feature Summary

Applications

< Local expansion (side card) for EKF CPU boards < Industrial networks - IoT - TSN < Rugged environments < Router and gateway < Data acquisition < Edge computing < Railway usage via front panel M12 cabling < Transportation vehicles, construction and harvesting machinery Environmental, Regulatory < Designed & manufactured in Germany < ISO 9001 certified quality management < Custom specific development available on request < Long term availability < Rugged solution < Coating, sealing, underfilling on request < RoHS compliant < Operating temperature -40°C to +85°C (industrial temperature range) < Storage temperature -40°C to +85°C, max. gradient 5°C/min < Humidity 5% ... 95% RH non condensing < Altitude -300m ... +3000m < Shock 15g 0.33ms, 6g 6ms < Vibration 1g 5-2000Hz < EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1) < MTBF 48.9 years © E K F - 4 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet J-GP J-RTC P-HSE1 BATT1 BATT2 P-FPH Dual GbE P-ETH Top Side Component Assembly CPU XEON E3 v6® PCH CM238 P-SODM SC5-FESTIVAL CompactPCI Serial EKF ekf.com•® • © • P-EXP 2 x USB 3.0 DP DP EXPHSE1 HSE2 P-HSE2 SODIMM DDR4 16GB ECC Soldered DDR4 16GB ECC J-MFG PCIe x4 M.2 2230 2260 2280 2242 M M.2 PCIe x4 NVMe HSE1 HSE2 SCL-RHYTHM EKF© MAGMOD 1MAGMOD 2MAGMOD 3MAGMOD 4 System Requirements The SCL-RHYTHM is a mezzanine side card, to be fixed on top of a suitable CPU carrier board. The pitch between carrier PCB and mezzanine PCB is 4HP, resulting in a 8HP common front panel for the entire assembly. Two mezzanine inter-board connectors are provided, for distribution of PCI Express ® signals from the CPU carrier to the SCL-RHYTHM side board. The SCL-RHYTHM also is a carrier board itself, which accommodates an M.2 NVMe SSD storage module. It is recommended to use a CompactPCI ® Serial backplane which provides the CPU card system slot on the right edge, in order to prevent loss of a peripheral slot (the SCL-RHYTHM is then positioned out of the backplane shape). The SCL-RHYTHM can be used e.g. with the SC5-FESTIVAL CPU card. The SCL PCB does not cover the CPU board with respect to the heat sink area. Hence, the CPU card may be equipped with a heat sink which utilises the full 8HP height available for the assembly unit, for optimized heat dissipation. © E K F - 5 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet GbE HD RB PG GP DP DP USB SC5- FESTIVAL OT GbE SCL- RHYTHM Front Panel 8HP Assembly Shown © E K F - 6 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet Carrier Card HSE1 Socket Key Id M 4.2H PCIe Gen3 3.3V HSE1 Simplified Block Diagram SCL-RHYTHM M.2 NVMe M.2 PCIe SSD 2230 2242 2260 2280 4 x I210-IT 1x4 Carrier Card HSE2HSE2 PCIe GbE NIC PCIe Power Switch 4x1 DC/DC 12V TPS 54620 3.3V 45520 Front Panel I/O 4HP GbE GbE GbE GbE PCIe GbE NIC PCIe GbE NIC PCIe GbE NIC Block Diagram © E K F - 7 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet M.2 Module Fixation (Picture Similar) PCIe x4 M.2 2230 2260 2280 2242 M M.2 PCIe x4 NVMe HSE1 HSE2 SCL-RHYTHM EKF© MAGMOD 1MAGMOD 2MAGMOD 3MAGMOD 4 M.2 Connector The SCL-RHYTHM is provided with an M.2 NVMe module host connector (M-key). After inserted, the M.2 module must be locked manually by a screw, in order to withstand shock and vibration. © E K F - 8 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet NVMe PCIe x4 M.2 M-Key • Pin 1 - 38 EKF Part #255.50.2.2223.10 GND 1 2 +3.3V GND 3 4 +3.3V PETN3 5 6 NC PETP3 7 8 NC GND 9 10 LED1# PERN3 11 12 +3.3V PERP3 13 14 +3.3V GND 15 16 +3.3V PETN2 17 18 +3.3V PETP2 19 20 NC GND 21 22 NC PERN2 23 24 NC PERP2 25 26 NC GND 27 28 NC PETN1 29 30 NC PETP1 31 32 NC GND 33 34 NC PERN1 35 36 NC PERP1 37 38 NC © E K F - 9 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet NVMe PCIe x4 M.2 M-Key continued • Pin 39 - 75 GND 39 40 SMB_CLK * PETN0 41 42 SMB_DATA * PETP0 43 44 ALERT * GND 45 46 NC PERN0 47 48 NC PERP0 49 50 PERST# GND 51 52 CLKREQ# REFCLKN 53 54 PEWAKE# REFCLKP 55 56 RSV GND 57 58 RSV M-Key 59 60 M-Key M-Key 61 62 M-Key M-Key 63 64 M-Key M-Key 65 66 M-Key NC 67 68 SUSCLK PEDET 69 70 +3.3V GND 71 72 +3.3V GND 73 74 +3.3V GND 75 * Logic level 1.8V signals - LSF0204 level shifter to 3.3V on-board PCI Express® M.2 Specification Socket 3 PCIe-based Module Pinout (Module Key M) © E K F - 1 0 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet M12 X-Coded Front Panel Receptacles M12 X-Coded Front Panel I/O Receptacles 1 - 4 Gigabit Ethernet • 271.12.008.20 • M12- X Flush-type socket 1+10 Gigabit Ethernet F/P LEDs yellow=1Gbit/s green=100Mbit/s off=10Mbit/s on=link established blinking=activity (data) Ports 1-4 1M D X 0 + 2M D X 0 - 3M D X 1 + 4M D X 1 - 5M D X 3 + 6M D X 3 - 7M D X 2 - 8M D X 2 + The pin numbers of an M12 X-coded connector do not reflect the RJ45 Gigabit Ethernet signal assignment. For cross-over patch cables M12 to RJ45 please refer to the table below. M12 X Signal Colors T568B RJ45

1 MDX0+ white/orange 1

2 MDX0- orange 2

3 MDX1+ white/green 3

4 MDX1- green 6

5 MDX3+ white/brown 7

6 MDX3- brown 8

7 MDX2- white/blue 5

8 MDX2+ blue 4

Suitable industrial Gigabit Ethernet M12 cable assemblies can be ordered from EKF, or directly from well-known cable and connector manufacturers e.g. Metz, Phoenix, Escha and many others. 271.12.008.00 © EKF • ekf.com Draft - Do Not Scale © E K F - 1 1 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet Ordering Information Cable Assemblies Gigabit Ethernet cable M12 to M12: #271.14.008.xx (xx=length/meter) Gigabit Ethernet cable M12 to RJ-45: #271.15.008.xx (xx=length/meter) M12 to RJ45 Cable Phoenix Contact M12 to M12 Cable Phoenix Contact M12 Cable Connector Phoenix Contact M12 Gigabit Ethernet Cable Assembly © E K F - 1 2 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet Mezzanine Connectors HSE1, HSE2 The SCL-RHYTHM is provided with two male mezza nine connectors on the bottom side of the PCB, which mate with the female mezzanine connectors on the carrier CPU card, for a resulting board-to- board mounting height of 18.7mm (4HP effective pitch, 8HP F/P width in total). HSE1 HSE1 is used to pass a PCIe® x4 link from the CPU carrier card to the on-board M.2 NVMe connector, for a suitable SSD mass storage module. HSE2 HSE2 is provided to supply the SCL-RHYTHM side card with additional PCIe® lanes. A PCIe® x1 link is established for each of the on-board I210-IT Gigabit Ethernet controllers. This requires the CPU carrier card HSE2 connector configured to PCIe® 4x1 (and not PCIe® 1x4 or 2x2). © E K F - 1 3 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet Carrier card connector 8mm female ERNI Microspeed 275.90.08.068.01 Supplement 10mm male connector for nominal height 18mm (SC* side card, B2B 18.7mm) High Speed Expansion P-HSE1 CFG_34 * b1 a1 CFG_12 * 3_PCIE_TXP b2 a2 1_PCIE_TXP 3_PCIE_TXN b3 a3 1_PCIE_TXN GND b4 a4 GND 3_PCIE_RXN b5 a5 1_PCIE_RXN 3_PCIE_RXP b6 a6 1_PCIE_RXP GND b7 a7 GND 4_PCIE_TXP b8 a8 2_PCIE_TXP 4_PCIE_TXN b9 a9 2_PCIE_TXN GND b10 a10 GND 4_PCIE_RXN b11 a11 2_PCIE_RXN 4_PCIE_RXP b12 a12 2_PCIE_RXP GND b13 a13 GND 2_USB3_TXP b14 a14 1_USB2_P 2_USB3_TXN b15 a15 1_USB2_N GND b16 a16 GND 2_USB3_RXP b17 a17 2_USB2_P 2_USB3_RXN b18 a18 2_USB2_N GND b19 a19 GND PCIE_CLK_P b20 a20 1_2_USB_OC# PCIE_CLK_N b21 a21 PLTRST# +5VS 1) b22 a22 +3.3VS 1) +5VS 1) b23 a23 +3.3VS 1) +5VPS 2) b24 a24 +3.3VA 3) +12VPS 2) b25 a25 +12VPS 2) * CFG_12 and CFG_34 = open (10k PU on CPU carrier board) indicating that a PCIe x4 link is requested 1) Power rail switched on in S0 state only 2) Power rail switched on in S0-S4 state 3) Power always on s9s18 s10 a25b25 1.00mm Pitch High Speed Male Connector © E K F - 1 4 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet Carrier card connector 8mm female ERNI Microspeed 275.90.08.068.01 Supplement 10mm male connector for nominal height 18mm (SC* side card, B2B 18.7mm) High Speed Expansion P-HSE2 3_PCIE_TXP b1 a1 1_PCIE_TXP 3_PCIE_TXN b2 a2 1_PCIE_TXN GND b3 a3 GND 3_PCIE_RXN b4 a4 1_PCIE_RXN 3_PCIE_RXP b5 a5 1_PCIE_RXP GND b6 a6 GND 4_PCIE_TXP b7 a7 2_PCIE_TXP 4_PCIE_TXN b8 a8 2_PCIE_TXN GND b9 a9 GND 4_PCIE_RXN b10 a10 2_PCIE_RXN 4_PCIE_RXP b11 a11 2_PCIE_RXP GND b12 a12 GND DP_LANE2_P b13 a13 DP_LANE0_P DP_LANE2_N b14 a14 DP_LANE0_N GND b15 a15 GND DP_LANE3_P b16 a16 DP_LANE1_P DP_LANE3_N b17 a17 DP_LANE1_N GND b18 a18 GND DP_AUX_P b19 a19 PCIE_CLK_P DP_AUX_N b20 a20 PCIE_CLK_N DP_CFG1 b21 a21 GND DP_HPD b22 a22 SMB_SCL 1) PLTRST# b23 a23 SMB_SDA 1) +12VPS 2) b24 a24 +12VPS 2) +12VPS 2) b25 a25 +12VPS 2) italic/grey pins are NC (shown for reference only) PCIe® can pre-configured 1x4, 2x2, 4x1 via soft-straps (Fla sh image CPU carrier card). For the SCL-RHYTHM PCIe ® 4x1 is mandatory. If misaligned, only one or two NICs will be present after system enumeration. 1) Connection to SMBus, isolated after system reset 2) Power rail switched on in S0-S4 state s9s18 s10 a25b25 1.00mm Pitch High Speed Male Connector © E K F - 1 5 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet

Ordering Information

For popular SCL-RHYTHM SKUs please refer to www.ekf.com/liste/liste_21.html#SCL Please note that the SCL-RHYTHM is a carrier card which typically comes without M.2 module populated, unless otherwise expressly ordered. Photos shown within this document and at other plac es may be equipped with M.2 modules just for application demonstration. If you need a turnkey solution with an M.2 NVMe storage module populated, please contact sales@ekf.com before ordering. Related Documents CompactPCI® Serial Basics / Overview CompactPCI® Serial www.ekf.com/s/smart_solution.pdf CompactPCI® Serial Home www.ekf.com/s/serial.html Recommended CPU Cards SC4-CONCERTO www.ekf.com/s/sc4/sc4.html SC5-FESTIVAL www.ekf.com/s/sc5/sc5.html © E K F - 1 6 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet Assembly w. Custom Specific Height CPU Heatsink Due to the special dimensions of the SCL-RHYTHM PCB, the heatsink of the CPU carrier card remains uncovered, which would allow mounting of a cust om specific height cooler, for improved heat dissipation. © E K F - 1 7 - e k f . c o m

Product Information • SCL-RHYTHM • M.2 NVMe & Quad M12 Gigabit Ethernet Beyond All Limits: EKF High Performance Embedded Industrial Computers Made in Germany boards. systems. solutions. EKF Elektronik GmbH Philipp-Reis-Str. 4 (Haus 1) Lilienthalstr. 2 (Haus 2)

59065 HAMM

Phone +49 (0)2381/6890-0 Fax +49 (0)2381/6890-90 Internet www.ekf.com E-Mail sales@ekf.com