SCI0100600

SCI0100600 CELDUC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Proud to serve youProud to serve youProud to serve youProud to serve you Data given at Tambient=25°C and subject to modification without previous notice celduc r e l a i s celduc r e l a i s S/CON/SCI0100600/B/07/03/07 PRELIMINARY DATA Page 1/5 UK IGBT BASED DC SOLID-STATE RELAY SCI0100600 Control voltage range 4.5-32VDC Max transient peak voltage 600V Advised max. DC Mains peak voltage 350VDC X Latest high voltage IGBT technology generation. X New innovative isolated driver ensuring fast power transistor turn on and off therefore low power transient. X Ultra low output leakage current X Low control current consumption X Triggered control input to avoid linear control risks X Low conducted and radiated disturbances Max. Load Current (with heatsink) 100ADC DC Mains voltage range Load current range Control input voltage range In & case / Out Insulation Connections Dimensions (WxHxD) Weight 350VDC Max Advised (Depends on protection clamping voltage) 0 to 100A (with heatsink) 4.5-32VDC 4kV M3 round tabs M5 round tabs 44.5 x 58.2 x 27 (mm) 100g Fig. 1 HIGH SIDE WIRING DIAGRAM (Load connected to “-“) Fig. 2 LOW SIDE WIRING DIAGRAM (Load connected to “+”) Please consult us to select the right protective components C1, D1 & D2. The red paths (C1/D1/D2) must be as short as possible ! Please consult us to select the right protective components C1, D1 & D2. The red paths (C1/D1/D2) must be as short as possible ! Fig. 3 INTERNAL DIAGRAM

S/CON/SCI0100600/B/07/03/07 PRELIMINARY DATA Page 2/5 UK CONTROL INPUT CHARACTERISTICS CHARACTERISTIC LABEL VALUE INFO. Fig. 4 CONTROL CURRENT vs. CONTROL VOLTAGE Nom. Control voltage Ucnom 12-24VDC Nom. Control current Icnom 35mADC Control voltage range Uc 4.5 – 32VDC typical=4.3V Control current consumption Ic 25 – 42mADC See curve Releasing control voltage Ucoffmax 1VDC Typical= 3.5V Max. reverse control voltage -Ucmax 32VDC -Icmax <100µA INPUT CIRCUIT Input impedance Rin Current limitation See curve @25°C 02468 1 0 1 2 1 4 1 6 1 8 2 0 2 2 2 4 2 6 2 8 3 0 3 2 Uc (VDC) Ic (mADC) TIME CHARACTERISTICS CHARACTERISTIC LABEL VALUE Turn on time ton 10µs Turn on delay tdon 600µs Turn off time toff 10µs Turn off delay tdoff 100µs TIME CHARACT. Max. On-Off frequency F(on-off) 700Hz POWER OUTPUT CHARACTERISTICS CHARACTERISTIC LABEL VALUE INFO. Mains voltage range Ut Ue Min = VCEsat Max (Advised) = 350VDC Depends on protection clamping voltage (D1) Non-repetitive peak voltage Utp 600V Overvoltage protection D1 Not integrated A voltage clamping mean must be connected across the terminals 1 & 2 (see fig 1 & 2) Please consult us to select the right protective components Off-state max reverse voltage drop (internal diode) -Ut 1.4V @Ie=100A Resistive Motor Maximum nominal currents Ie max 100A Please contact us See fig. 9 Switch OFF D<1% Switch OFF Fmax ON-state Max. non-repetitive peak current Iepeak 100A 100A 550A @Tc=100°C @Tj=175°C @Utp (See fig. 8) Min. load current Iemin 0mA Max. leakage current Ielk max 1mA @Utp @Tjmax Max. on-state resistance VCEsat 1.35V @Tj=25°C 1.45V @Tj=125°C @Iemax Typ. output capacitance Cout 300pF @Utp Junction/case thermal resistance Rthjc 0.385K/W Built-in heatsink thermal resistance vertically mounted Rthra 10K/W @∆Tra=75°C Heatsink thermal time constant Tthra 10 minutes @∆Tra=60°C Control inputs/power outputs insulation voltage Uimp 4kV Inputs/case insulation voltage Uimp 4kV Outputs/case insulation voltage Uimp 4kV Isolation resistance Rio 1GΩ Isolation capacitance Cio <8pF Maximum junction temperature Tjmax 175°C Storage ambient temperature Tstg -40->+100°C Operating ambient temperature Tamb -40->+90°C See fig. 9 POWER CIRCUIT Max. case temperature Tc 100°C

S/CON/SCI0100600/B/07/03/07 PRELIMINARY DATA Page 3/5 UK OUTPUT SWITCH CHARACTERISTIC CURVES Fig. 5 VOLTAGE DROP VS LOAD CURRENT Fig. 6 REVERSE VOLTAGE DROP VS REVERSE CURRENT 100 120 140 0 0,2 0,4 0,6 0,8 1 1,2 1,4 1,6 1,8 2 VCEs at (V) Ie (A) Tj = 25°C Tj = 125°C Tj = 175°C 100 150 200 00 , 511 , 52 -Ut (V) -Ie (A) Tj=125°C Fig. 7 POWER ELEMENT TRANSIENT THERMAL IMPEDANCE vs. PULSE DURATION Fig. 8 ON-STATE PEAK OVERLOAD CURRENT vs. PULSE DURATION 0,02 0,04 0,06 0,08 0,1 0,12 0,14 0,16 0,18 0,0001 0,001 0,01 0,1 1 t (s) Zthjc (K/W) D=50% D=20% D=10% D=5% D=2% D=1% Single pulse 0 100 200 300 400 500 600 700 0,0001 0,001 0,01 0,1 1 Pulse Duration (s) Ie (Apk) Non-repetitive D=1% (Tc=100°C, Tjmax=175°C) Repetitive D=50%(Tc=100°C, Tjmax=125°C) Fig. 9 POWER DISSIPATED AND LOAD CURRENT LIMIT VS TEMPERATURE 100 110 0 1 02 03 04 05 06 07 08 09 0 1 0 0 1 1 0 14.5 8K/W 4K/W 43.5 72.5 102 131 145 160 116 10K/W = No Heatsink / 1LD12020 4K/W = 150x150x3mm aluminium sheet 2.2K/W = WF262100 / WF151200 0.55K/W = WF050000 0.3K/W = WF031100 0.2K/W = No reference 0.1K/W = No reference Permanent current Ie (ARMS) Power dissipated Pd (W) Please refer to the installation notice for precautions about mounting the device on a heatsink. Ambient temperature (°C)

S/CON/SCI0100600/B/07/03/07 PRELIMINARY DATA Page 4/5 UK GENERAL INFORMATION Connections Power Control Screwdriver advised Philips™ NR2 Philips™ NR1 Min and max tightening torque 1.8 N.m 0.8 N.m CONNEC- TIONS Insulated crimp terminals (round tabs, eyelet type) M5 M3 Display Green LED (indicates relay has switched ON) Housing UL94V0 Mounting 2 screws (M4x12mm) See mounting sheet Noise level No audible noise MISC. Weight 100g STANDARDS Standards IEC60947-1 Protection level IP00 Protection against direct touch None CE marking Yes GENERAL UL, cULUS and VDE approvals Pending TYPE OF TEST STANDARD LEVEL EFFECT E.S.D. (Electrostatic discharges) EN61000-4-2 Pending ? Radiated electromagnetic fields EN61000-4-3 Pending ? Fast transients bursts EN61000-4-4 Pending No effect Electric chocks EN61000-4-5 Pending ? E.M.C. IMMUNITY Voltage drop EN61000-4-11 - E.M.C. EMISSION Radiated and conducted disturbances NFEN55011 Pending

S/CON/SCI0100600/B/07/03/07 PRELIMINARY DATA Page 5/5 UK DIMENSIONS AND ACCESSORIES Fig.

10 DIMENSIONS (mm)

TOLERANCES: ± 0.3 1+ 2- 4- 3+ Ø4.743.2 47.6 7.5 5.125.4 44.5 58.2 ±0,5 19.6 22.8 25.8 ACCESSORIES PROTECTIVE COVER 1K470000 Please consult our website for other accessory references (Heatsinks, mounting adaptors, thermal grease…) www.celduc.com Rue Ampère B.P. 4 42290 SORBIERS - France Phone : 33 (0) 4 77 53 90 20 Fax : 33 (0) 4 77 53 85 51 Email : celduc-relais@celduc.com