SCF010-1812 SOCAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

Surface Mount Resettable PTCs Revision September 12, 2013 2 / 5 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. SCF1812 Series SOCAY Electronics Co., Ltd. www.socay.com I hold= Hold current: maximum current device will pass without tripping in 23°C still air. I trip= Trip current: minimum current at which the device will trip in 23°C still air. V max= Maximum voltage device can withstand without damage at rated current (Imax) I max= Maximum fault current device can withstand without damage at rated voltage (Vmax) Pdtyp.= Power dissipated from device when in the tripped state at 23°C still air. R min= Minimum resistance of device in initial (un-soldered) state. R 1max= Maximum resistance of device at 23°C measured one hour after tripping. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. A = SCF010/010-R-1812 B = SCF014/014-R-1812 C = SCF020/020-R-1812 D = SCF035/035-R-1812 E = SCF050/050-R-1812 F = SCF075/075-R/ 075-24R/075-33R-1812 G = SCF110/110-R/110-16/ 110-16-R/110-24R-1812 H = SCF125/125-R-1812 I = SCF150/150-R/ 150-12R/150-24R-1812 J = SCF160/160-R/ 160-12R/160-16R-1812 K = SCF200R-1812 L = SCF260R/260-13R/ 260-16R-1812 M= SCF190R-1812 N = SCF300R-812 A=SCF075, 075-24R, 075-33R, 110, 110-R, 110-16-R, 110-24R, 125, 150, 150-12R, 150-24R, 160, 160-12R, 160-16R, 190R, 200R, 260R, 260-13R, 260-16R, 300R-1812 B=SCF010, 014, 020, 035, 050-1812 Terminal pad material Pure Tin Soldering Characteristics Meets EIA specification RS 186-9E, ANSI/J-std-002 Category 3 Temperature Rerating Chart – I hold (A) Temperature Rerating Curve Average Time Current Curves Fault Current (A) Material Specifications Electrical Parameters (Continue) Ambient Temperature (°C) B A

Surface Mount Resettable PTCs Revision September 12, 2013 3 / 5 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. SCF1812 Series SOCAY Electronics Co., Ltd. www.socay.com Profile Feature Pb-Free Assembly Average Ramp-Up Rate (TS max to TP) 3°C/second max. Preheat : Temperature Min (TSmin) Temperature Max (TSmax) Time (TSmin to TSmax) 150°C 200°C 60-180 seconds Time maintained above: Temperature(TL) Time (tL) 217°C 60-150 seconds Peak/Classification Temperature(TP): 260°C Time within 5°C of actual peak: Temperature 20-40 seconds Ramp-down Rate: 6°C/ second max. Time 25°C to Peak Temperature 8 minutes max. Note: All temperatures refer to of the package, measured on the package body surface. Solder reflow Due to “Lead Free” nature, Temperature and Dwelling time for the soldering zone is higher than those for Regular. This may cause damage to other components. 1. Recommended max past thickness > 0.25mm. 2. Devices can be cleaned using standard methods and aqueous solvent. 3. Rework use standard industry practices. 4. Storage Environment : < 30/ 60%RH℃ Caution: 1. If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. 2. Devices are not designed to be wave soldered to the bottom side of the board. Example A B C Device Nominal Nominal Nominal 1812 Series 3.45 1.78 3.50 The dimension in the table below provide the recommended pad layout for each SCF1812 device Part Numbering Part Marking Soldering Parameters Ramp-down Preheat Critical Zone TL to TP Time to peak temperature (t 25℃ to peak) TP TL TS(max) TS(min) Temperature Ramp-up Time Pad Layouts Unit: mm SCF XXX – XXR– 1812 Device Size Code Voltage Rating Current Rating Socay Product Code F110 F XXXL Part Identification Logo F XXX XX Part Identification Logo 110 16 F

Surface Mount Resettable PTCs Revision September 12, 2013 4 / 5 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. SCF1812 Series SOCAY Electronics Co., Ltd. www.socay.com Figure1 Figure2 A B C D E Part Number Figure Dimensions Unit: mm

Surface Mount Resettable PTCs Revision September 12, 2013 5 / 5 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. SCF1812 Series SOCAY Electronics Co., Ltd. www.socay.com Part Number Packaging Option Quantity Part Number Packaging Option Quantity SCF010-1812 Tape & Reel -12mm/7″tape 2000 SCF110-24R-1812 Tape & Reel -12mm/7″tape 1500 SCF010-R-1812 Tape & Reel -12mm/7″tape 2000 SCF125-1812 Tape & Reel -12mm/7″tape 2000 SCF014-1812 Tape & Reel -12mm/7″tape 2000 SCF125-R-1812 Tape & Reel -12mm/7″tape 2000 SCF014-R-1812 Tape & Reel -12mm/7″tape 2000 SCF150-1812 Tape & Reel -12mm/7″tape 2000 SCF020-1812 Tape & Reel -12mm/7″tape 2000 SCF150-R-1812 Tape & Reel -12mm/7″tape 2000 SCF020-R-1812 Tape & Reel -12mm/7″tape 2000 SCF150-12R-1812 Tape & Reel -12mm/7″tape 2000 SCF035-1812 Tape & Reel -12mm/7″tape 2000 SCF150-24R-1812 Tape & Reel -12mm/7″tape 2000 SCF035-R-1812 Tape & Reel -12mm/7″tape 2000 SCF160-1812 Tape & Reel -12mm/7″tape 2000 SCF050-1812 Tape & Reel -12mm/7″tape 2000 SCF160-R-1812 Tape & Reel -12mm/7″tape 2000 SCF050-R-1812 Tape & Reel -12mm/7″tape 2000 SCF160-12R-1812 Tape & Reel -12mm/7″tape 2000 SCF075-1812 Tape & Reel -12mm/7″tape 2000 SCF160-16R-1812 Tape & Reel -12mm/7″tape 2000 SCF075-R-1812 Tape & Reel -12mm/7″tape 2000 SCF190R-1812 Tape & Reel -12mm/7″tape 2000 SCF075-24R-1812 Tape & Reel -12mm/7″tape 1500 SCF200R-1812 Tape & Reel -12mm/7″tape 2000 SCF075-33R-1812 Tape & Reel -12mm/7″tape 1500 SCF260R-1812 Tape & Reel -12mm/7″tape 2000 SCF110-1812 Tape & Reel -12mm/7″tape 2000 SCF260-13R-1812 Tape & Reel -12mm/7″tape 1500 SCF110-R-1812 Tape & Reel -12mm/7″tape 2000 SCF260-16R-1812 Tape & Reel -12mm/7″tape 1500 SCF110-16-1812 Tape & Reel -12mm/7″tape 2000 SCF300R-1812 Tape & Reel -12mm/7″tape 1500 SCF110-16-R-1812 Tape & Reel -12mm/7″tape 2000 u Operation beyond the specified maximum ratings or improper use may result in damage and possible electrical arcing and/or flame. u PPTC device are intended for occasional over-current protection. Application for repeated over-current condition and/or prolonged trip are not anticipated. u Avoid contact of PPTC device with chemical solvent. Prolonged contact will damage the device performance. Packaging Warning Tape and Reel Specifications Direction of Feed 0.49 (12.4) 7.0 (177.8) Dimensions are in inches (and millimeters) 0.36 (9.2) 0.157 (4.0) Diameter Cover tape 0.472 (12.0) 0.315 (8.0)