SCF005-1210-R SOCAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Surface Mount Resettable PTCs Revision September 12, 2013 2 / 4 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. SCF1210 Series SOCAY Electronics Co., Ltd. www.socay.com Profile Feature Pb-Free Assembly Average Ramp-Up Rate (TS max to TP) 3°C/second max. Preheat : Temperature Min (TSmin) Temperature Max (TSmax) Time (TSmin to TSmax) 150°C 200°C 60-180 seconds Time maintained above: Temperature(TL) Time (tL) 217°C 60-150 seconds Peak/Classification Temperature(TP): 260°C Time within 5°C of actual peak: Temperature 20-40 seconds Ramp-down Rate: 6°C/ second max. Time 25°C to Peak Temperature 8 minutes max. Note: All temperatures refer to of the package, measured on the package body surface. Solder reflow Due to “Lead Free” nature, Temperature and Dwelling time for the soldering zone is higher than those for Regular. This may cause damage to other components. 1. Recommended max past thickness > 0.25mm. 2. Devices can be cleaned using standard methods and aqueous solvent. 3. Rework use standard industry practices. 4. Storage Environment : < 30/ 60%RH℃ Caution: 1. If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. 2. Devices are not designed to be wave soldered to the bottom side of the board. A= SCF005-1210-R B= SCF010-1210-R C= SCF020-1210-R D= SCF035-1210-R E= SCF050-1210-R F= SCF075-1210-R/ SCF075-24-1210R G= SCF110-1210R H= SCF150-1210R I= SCF175-1210R J= SCF200-1210R Terminal pad material Pure Tin Soldering Characteristics Meets EIA specification RS 186-9E, ANSI/J-std-002 Category 3 Temperature Rerating Chart – I hold (A) Soldering Parameters Temperature Rerating Curve Average Time Current Curves Material Specifications Ramp-down Preheat Critical Zone TL to TP Time to peak temperature (t 25℃ to peak) TP TL TS(max) TS(min) Temperature Ramp-up Time Ambient Temperature (°C) Fault Current (A)
Surface Mount Resettable PTCs Revision September 12, 2013 3 / 4 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. SCF1210 Series SOCAY Electronics Co., Ltd. www.socay.com Example A B C Device Nominal Nominal Nominal 1210 Series 2.00 1.00 2.80 The dimension in the table below provide the recommended pad layout for each SCF1210 device A B C D E Part Number Dimensions Unit: mm Part Numbering Part Marking Pad Layouts Unit: mm SCF XXX – XX – 1210R Device Size Code Voltage Rating Current Rating Socay Product Code F75 F75 F F XX Part Identification Logo F XX X Part Identification Logo
Surface Mount Resettable PTCs Revision September 12, 2013 4 / 4 @ SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. SCF1210 Series SOCAY Electronics Co., Ltd. www.socay.com Part Number Packaging Option Quantity SCF005-1210-R Tape & Reel -8mm/7″tape 3000 SCF010-1210-R Tape & Reel -8mm/7″tape 3000 SCF020-1210-R Tape & Reel -8mm/7″tape 3000 SCF035-1210-R Tape & Reel -8mm/7″tape 4000 SCF050-1210-R Tape & Reel -8mm/7″tape 4000 SCF075-1210-R Tape & Reel -8mm/7″tape 4000 SCF075-24-1210R Tape & Reel -8mm/7″tape 3000 SCF110-1210R Tape & Reel -8mm/7″tape 3000 SCF150-1210R Tape & Reel -8mm/7″tape 3000 SCF175-1210R Tape & Reel -8mm/7″tape 3000 SCF200-1210R Tape & Reel -8mm/7″tape 3000 u Operation beyond the specified maximum ratings or improper use may result in damage and possible electrical arcing and/or flame. u PPTC device are intended for occasional over-current protection. Application for repeated over-current condition and/or prolonged trip are not anticipated. u Avoid contact of PPTC device with chemical solvent. Prolonged contact will damage the device performance. Warning Tape and Reel Specifications Packaging Direction of Feed 0.33 (8.4) 0.512(13.0) Arbor Hole Diameter 7.0 (177.8) Packag Dimensions are in inches (and millimeters) 0.157 (4.0) 0.059 (1.5) Diameter Cover tape 0.314 (8.0) 0.157 (4.0) 0.212 (5.4)