DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
For desktop PCs, notebook PCs and personal digital assistants For home audio equipment (TVs and set top boxes) For audio systems For digital camcorders For digital still cameras For headphone players
Applications
SD Memory Card, MultiMediaCard™, Memory Stick TM Standard mount/Reverse mount Surface mounting type Push-push type 500V AC 1minute Applicable media Items Specifications Media ejection structure Mounting type Mounting style 1,000MЊ min. 100mЊ max. 500mЊ max. 10,000cyclesʢSD Memory Cardʣ 12,000cyclesʢMemory StickTMʣ ʵ25ˆ to ʴ60ˆOperating temperature range Contact resistance ʢInitialʣ Connector contacts Detection switch Insertion and removal cycle Voltage proof Insulation resistance ʢInitialʣ Typical Specifications Standard mount Media ejection structure Push-push type Mounting system Stand- offʢmmʣ Feature With boss Product No. SCDB1C0105 Reverse mount SCDB2A0200 Product Line Push-push type featuring contact protection function with less impact to media cards. Packing system Drawing No. Tray Combine Type Connector (for SD Memory Card, MultiMediaCard™, Memory Stick™) SCDB Series
PC board mounting hole dimensions ʢViewed from the mounting face sideʣ For SD Memory Card For microSD™ Card For SIM Card 8pins For W-SIM For Memory Stick™ For Memory Stick Micro™ Combine Type For Express Card™ For Compact Flash™ For PC cards supporting CardBus For CMOS Camera Module ʢ5ʣ ʢ1.2ʣOver travel Card eject travel 4.5 0.65 32.2 46.15 Card centerConnector center ʢ35ʣ 28ʢ7ʣ Card lock position ø1.5 No.!9No.!0 No.@2 No.9 No.8 No.@1 No.@0 Unit:mm Standard mount Dimensions No. Style No.@2:Common 6.95 ʢHoleʣ ø1.55 Positioning boss hole Land area No pattern area No part mounting 32.3 14.15 16.6 10-1 13.5ʢ1.5ʷ9ʣ 5.525 24.55 23.05 25.35 23.55 1.55 19.2 10.6511 33.2 29.6 9-1 16ʢ2ʷ8ʣ 28.5 18.7 20.8 18.5 2.9 13.45 11.65 8.05 6.25 No.@1: Card detect switch No.i No.u No.y No.t No.o No.q No.w No.e No.r No.!9 No.!8 No.!7 No.!6 No.!5 No.!0 No.!1 No.!2 No.!3 No.!4 detect switch No.@0:Write protect No.@3:Ground 1.55 5.525 25.15 3.2 1.6 4-0.9 17.3 18.85 19.7 22.9 24.2 25.5 21.6 28.6 20.3 8.2 6.423.55 22.25 6-0.9 32.3 13.5(1.5G9) 16.6 14.15 10-1 33.9 30.8 (hole) 20.95 19.65 (hole) Land area No part mounting ø1.55 No.!6 No.!5 Ground No.9 No.1 No.2 No.3 No.4 No.!8 No.!9 No.!7 No.!4 No.!3 No.!2 No.!1 No.!0 No.8 No.7 No.6 No.5 No.@0 Reverse mount 46.15 ʢ7ʣ 28 ʢ35ʣCard inserting No.@0 No.!9 (0.35) (5) (1.2) Card eject travel Over travel 22.5 21.5 24.1 2.85 1.55 2.25 12.6 12.3 Ground No.4 No.!0 No.@1 No.@2 No.5 Card center Connector center PC board surface 4.5 0.55 2-ø1.5 16.4 4.1 Combine Type Connector(for SD Memory Card, MultiMediaCard™, Memory Stick™) SCDB Series
microSD™ Card For SIM Card 8pins For W-SIM For Memory Stick Micro™ Combine Type For Express Card™ For Compact Flash™ For PC cards supporting CardBus For CMOS Camera Module For Memory Stick™ Soldering Conditions Example of Reflow Soldering ConditionʢReferenceʣ 1. Heating method: Double heating method with infrared heater. 2. Temperature measurement: Thermocouple 0.1 to 0.2П CAʢKʣor CCʢTʣ. 3. Temperature profileʢSurface of productsʣ 200 100 240ˆ(max.) 230ˆ(min.) 150ˆ 180ˆ Time (s) 10 sec.(max.)90ʶ30 sec. Room temperature Temperature (˚C ) Pre-heating Heating time sec. 1. When soldering terminals, there is a danger that load placed on the terminals may cause rattle, deformation or electrical degradation to occur depending on the conditions. Caution is therefore required. 2. Avoid use of water-soluble soldering flux, since it may corrode the product. 3. Check and conform to reflow soldering requirements under actual mass production conditions. 4. PC board warping may alter the characteristics. Please take this into consideration when designing patterns and layout. 5. The card specifications are provided by the above manufactures. Products by other manufactures may not be compliant with these specifications and are subject to change without prior notice. Cautions for using this product Small Memory Card Connectors