SCAN18541T

SCAN18541T FAIRCHILD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

Features

I IEEE 1149.1 (JTAG) Compliant I Dual output enable signals per byte I 3-STATE outputs for bus-oriented applications I 9-bit data busses for parity applications I Reduced-swing outputs source 32 mA/sink 64 mA I Guaranteed to drive 50Ω transmission line to TTL input levels of 0.8V and 2.0V I TTL compatible inputs I 25 mil pitch SSOP (Shrink Small Outline Package) I Includes CLAMP and HIGHZ instructions I Member of Fairchild’s SCAN Products Ordering Code: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Pin Names Truth Tables H = HIGH Voltage Level X = Immaterial L = LOW Voltage Level Z = High Impedance Order Number Package Number Package Description SCAN18541TSSC MS56A 56-Lead Shrink Small Outline Package (SSOP), JEDEC MO-118, 0.300 Wide Pin Names Description AI(0–8) Input Pins, A Side BI(0–8) Input Pins, B Side AOE 1, AOE2 3-STATE Output Enable Input Pins, A Side BOE 1, BOE2 3-STATE Output Enable Input Pins, B Side AO (0–8) Output Pins, A Side AO (0–8) Output Pins, B Side Inputs AO (0–8) AOE 1 AOE 2 AI(0–8) LLH H HXXZ XHXZ LLLL Inputs BO (0–8) BOE 1 BOE 2 BI(0–8) LLH H HXXZ XHXZ LLLL

www.fairchildsemi.com 2 SCAN18541T Block Diagrams Byte A Tap Controller Byte B Note: BSR stands for Boundary Scan Register.

3 www.fairchildsemi.com SCAN18541T Description of Boundary-Scan Circuitry The scan cells used in the BOUNDARY-SCAN register are one of the following two types depending upon their loca- tion. Scan cell TYPE1 is intended to solely observe system data, while TYPE2 has the additional ability to control sys- tem data. Scan cell TYPE1 is located on each system input pin while scan cell TYPE2 is located at each system output pin as well as at each of the two internal active-high output enable signals. AOE controls the activity of the A-outputs while BOE controls the activity of the B-outputs. Each will acti- vate their respective outputs by loading a logic high. The BYPASS register is a single bit shift register stage identical to scan cell TYPE1. It captures a fixed logic low. Bypass Register Scan Chain Definition Logic 0 The INSTRUCTION register is an 8-bit register which cap- tures the default value of 10000001. The two least signifi- cant bits of this captured value (01) are required by IEEE Std 1149.1. The upper six bits are unique to the SCAN18541T device. SCAN CMOS Test Access Logic devices do not include the IEEE 1149.1 optional identifica- tion register. Therefore, this unique captured value can be used as a “pseudo ID” code to confirm that the correct device is placed in the appropriate location in the boundary scan chain. Instruction Register Scan Chain Definition MSB → LSB Scan Cell TYPE1 Scan Cell TYPE2 Instruction Code Instruction

00000000 EXTEST

10000001 SAMPLE/PRELOAD

10000010 CLAMP

00000011 HIGH-Z

www.fairchildsemi.com 4 SCAN18541T Description of Boundary-Scan Circuitry (Continued) Boundary-Scan Register Scan Chain Definition (42 Bits in Length)

5 www.fairchildsemi.com SCAN18541T Description of Boundary-Scan Circuitry (Continued) Boundary-Scan Register Definition Index Bit No. Pin Name Pin No. Pin Type Scan Cell Type

41 AOE 1 3 Input TYPE1 Control

Signals40 AOE 2 54 Input TYPE1

39 AOE Internal TYPE2

38 BOE

37 BOE 2 31 Input TYPE1

36 BOE Internal TYPE2

0 55 Input TYPE1 A –in

34 AI 1 53 Input TYPE1

33 AI 2 52 Input TYPE1

32 AI 3 50 Input TYPE1

31 AI 4 49 Input TYPE1

30 AI 5 47 Input TYPE1

29 AI 6 46 Input TYPE1

28 AI 7 44 Input TYPE1

27 AI 8 43 Input TYPE1

26 BI 0 42 Input TYPE1 B –in

25 BI 1 41 Input TYPE1

24 BI 2 39 Input TYPE1

23 BI 3 38 Input TYPE1

22 BI 4 36 Input TYPE1

21 BI 5 35 Input TYPE1

20 BI 6 33 Input TYPE1

19 BI 7 32 Input TYPE1

18 BI 8 30 Input TYPE1

17 AO 0 2 Output TYPE2 A –out

16 AO 1 4 Output TYPE2

15 AO 2 5 Output TYPE2

14 AO 3 7 Output TYPE2

13 AO 4 8 Output TYPE2

12 AO 5 10 Output TYPE2

11 AO 6 11 Output TYPE2

10 AO 7 13 Output TYPE2

8B O 0 15 Output TYPE2 B –out 7B O 1 16 Output TYPE2 6B O 2 18 Output TYPE2 5B O 3 19 Output TYPE2 4B O 4 21 Output TYPE2 3B O 5 22 Output TYPE2 2B O 6 24 Output TYPE2 1B O 7 25 Output TYPE2 0B O 8 27 Output TYPE2

www.fairchildsemi.com 6 SCAN18541T Absolute Maximum Ratings(Note 1) Recommended Operating Conditions Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, with- out exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of SCAN circuits outside databook specifications. Supply Voltage (VCC ) −0.5V to +7.0V DC Input Diode Current (IIK) VI = −0.5V −20 mA VI = VCC +0.5V +20 mA DC Output Diode Current (IOK ) VO = −0.5V −20 mA VO = VCC +0.5V +20 mA DC Output Voltage (VO ) −0.5V to VCC +0.5V DC Output Source/Sink Current (IO ) ±70 mA DC V CC or Ground Current Per Output Pin ±70 mA Junction Temperature SSOP +140°C Storage Temperature −65°C to +150°C ESD (Min) 2000V Supply Voltage (VCC ) SCAN Products 4.5V to 5.5V Input Voltage (VI) 0V to V CC Output Voltage (VO ) 0V to V CC Operating Temperature (TA) −40°C to +85°C Minimum Input Edge Rate ∆V/∆t 125 mV/ns VIN from 0.8V to 2.0V VCC @ 4.5V, 5.5V Symbol Parameter VCC TA = +25°CT A = −40°C to +85°C Units Conditions (V) Typ Guaranteed Limits VIH Minimum HIGH 4.5 1.5 2.0 2.0 V VOUT = 0.1V VIL Maximum LOW 4.5 1.5 0.8 0.8 V VOUT = 0.1V VOH Minimum HIGH 4.5 3.15 3.15 VI OUT = −50 µA Output Voltage 5.5 4.15 4.15 (Note 3) 4.5 2.4 2.4 V VIN = VIL or VIH 5.5 2.4 2.4 I OH = −32 mA 4.5 2.4 V VIN = VIL or VIH 5.5 2.4 I OH = −24 mA VOL Maximum LOW 4.5 0.1 0.1 V I OUT = 50 µA Output Voltage 5.5 0.1 0.1 (Note 3) 4.5 0.55 0.55 V VIN = VIL or VIH 5.5 0.55 0.55 I OL = 64 mA 4.5 0.55 V VIN = VIL or VIH 5.5 0.55 I OL = 48 mA IIN Maximum Input Leakage Current 5.5 ±0.1 ±1.0 µAV I = VCC , GND IIN Maximum Input 5.5 2.8 3.6 µAV I = VCC TDI, TMS Leakage −385 −385 µAV I = GND Minimum Input 5.5 −160 −160 µAV I = GND Leakage IOLD Minimum Dynamic 5.5 94 94 mA V OLD = 0.8V Max IOHD Output Current (Note 2) −40 −40 mA V OHD = 2.0V Min IOZ Maximum Output Leakage Current 5.5 ±0.5 ±5.0 µAV I (OE) = VIL, VIH IOS Output Short 5.5 −100 −100 mA V O = 0V Circuit Current (min) ICC Maximum Quiescent 5.5 16.0 88 µA VO = Open Supply Current TDI, TMS = VCC 5.5 750 820 µA VO = Open TDI, TMS = GND

7 www.fairchildsemi.com SCAN18541T Note 2: Maximum test duration 2.0 ms, one output loaded at a time. Note 3: All outputs loaded; thresholds associated with output under test. Noise Specifications Note 4: Maximum number of outputs that can switch simultaneously is n. (n-1) outputs are switched LOW and one output held LOW. Note 5: Maximum number of outputs that can switch simultaneously is n. (n-1) outputs are switched HIGH and one output held HIGH. Note 6: Worst case package. Note 7: Maximum number of data inputs (n) switching. (n-1) input switching 0V to 3V. Input under test switching 3V to threshold (VILD). Normal Operation: Note 8: Voltage Range 5.0 is 5.0V ± 0.5V. Symbol Parameter VCC TA = +25°CT A = −40°C to +85°C Units Conditions (V) Typ Guaranteed Limits ICCt Maximum ICC 5.5 2.0 2.0 mA V I = VCC –2.1V Per Input 5.5 2.15 2.15 mA VI = VCC –2.1V TDI/TMS Pin, Test One with the Other Floating Symbol Parameter V CC TA = +25°CT A = −40°C to +85°C Units (V) Typ Guaranteed Limits VOLP Maximum HIGH Output Noise 5.0 1.0 1.5 V (Note 4)(Note 5) VOLV Minimum LOW Output Noise 5.0 −0.6 −1.2 V (Note 4)(Note 5) VOHP Maximum Overshoot 5.0 V OH +1.0 V OH +1.5 V (Note 4)(Note 6) VOHV Minimum VCC Droop 5.0 V OH −1.0 V OH −1.8 V (Note 4)(Note 6) VIHD Minimum HIGH Dynamic Input 5.5 1.6 2.0 2.0 V Voltage Level (Note 6)(Note 7) VILD Maximum LOW Dynamic Input 5.5 1.4 0.8 0.8 V Voltage Level (Note 6)(Note 7) Symbol Parameter VCC TA = +25°CT A = −40°C to +85°C Units(V) C L = 50 pF C L = 50 pF (Note 8) Min Typ Max Min Max ns tPHL Data to Q 2.5 9.0 2.5 9.8 ns tPHZ 1.5 10.2 1.5 10.7 ns tPZH 2.0 9.5 2.0 10.5

www.fairchildsemi.com 8 SCAN18541T Scan Test Operation: Note: All Propagation Delays involving TCK are measured from the falling edge of TCK. Note 9: Voltage Range 5.0 is 5.0V ± 0.5V. Symbol Parameter VCC TA = +25°CT A = −40°C to +85°C Units(V) C L = 50 pF C L = 50 pF (Note 9) Min Typ Max Min Max ns tPHL TCK to TDO 3.5 13.2 3.5 14.5 ns tPHZ TCK to TDO 2.5 11.5 2.5 11.9 ns tPZH TCK to TDO 3.0 14.5 3.0 15.8 tPLH , Propagation Delay 5.0 18.0 5.0 19.8 During Update-DR State tPLH , Propagation Delay 5.0 18.6 5.0 20.2 During Update-IR State tPLH , Propagation Delay During Test Logic 5.5 19.9 5.5 21.5 Reset State t PLZ , Propagation Delay 4.0 16.4 4.0 18.2 During Update-DR State t PLZ , Propagation Delay 5.0 19.5 5.0 20.8 During Update-IR State t PLZ , Propagation Delay During Test Logic 5.0 19.9 5.0 21.5 Reset State tPZL , Propagation Delay 5.0 18.9 5.0 20.9 During Update-DR State tPZL , Propagation Delay 6.5 22.4 6.5 24.2 During Update-IR State tPZL , Propagation Delay During Test Logic 7.0 23.8 7.0 25.7 Reset State

9 www.fairchildsemi.com SCAN18541T AC Operating Requirements Scan Test Operation: Note: All Input Timing Delays involving TCK are measured from the rising edge of TCK. Note 10: Voltage Range 5.0 is 5.0V ± 0.5V. Note 11: This delay represents the timing relationship between the data input and TCK at the associated scan cells numbered 0-8, 9-17, 18-26 and 27-35. Note 12: Timing pertains to BSR 37, 38, 40 and 41 only. Note 13: This delay represents the timing relationship between AOE/BOE and TCK for scan cells 36 and 39 only. Symbol Parameter VCC TA = +25°CT A = −40°C to +85°C Units(V) C L = 50 pF C L = 50 pF (Note 10) Guaranteed Minimum tS Setup Time, H or L 5.0 3.0 3.0 ns Data to TCK (Note 11) tH Hold Time, H or L 5.0 4.5 4.5 ns TCK to Data (Note 11) tS Setup Time, H or L 5.0 3.0 3.0 ns AOE n, BOEn to TCK (Note 12) tH Hold Time, H or L 5.0 4.5 4.5 ns TCK to AOEn, BOEn (Note 12) tS Setup Time, H or L 5.0 3.0 3.0 ns Internal AOE, BOE, to TCK (Note 13) tH Hold Time, H or L 5.0 3.0 3.0 ns TCK to Internal AOE, BOE (Note 13) tS Setup Time, H or L 5.0 8.0 8.0 ns TMS to TCK tH Hold Time, H or L 5.0 2.0 2.0 ns TCK to TMS tS Setup Time, H or L 5.0 4.0 4.0 ns TDI to TCK tH Hold Time, H or L 5.0 4.5 4.5 ns TCK to TDI tW Pulse Width TCK 5.0 H 15.0 15.0 ns L5 . 0 5 . 0 fMAX Maximum TCK 5.0 25 25 MHz Clock Frequency TPU Wait Time, Power Up 5.0 100 100 ns to TCK TDN Power Down Delay 0.0 100 100 ms

www.fairchildsemi.com 10 SCAN18541T Extended AC Electrical Characteristics Note 14: This specification is guaranteed but not tested. The limits apply to propagation delays for all paths described switching in phase (i.e., all LOW-to- HIGH, HIGH-to-LOW, etc.). Note 15: This specification is guaranteed but not tested. The limits represent propagation delays with 250 pF load capacitors in place of the 50 pF load capacitors in the standard AC load. This specification pertains to single output switching only. Note 16: 3-STATE delays are load dominated and have been excluded from the datasheet. Note 17: The Output Disable Time is dominated by the RC network (500Ω , 250 pF) on the output and has been excluded from the datasheet. Note 18: Skew is defined as the absolute value of the difference between the actual propagation delays for any two separate outputs of the same device. The specification applies to any outputs switching HIGH-to-LOW (tOSHL ), LOW-to-HIGH (tOSLH ), or any combination switching LOW-to-HIGH and/or HIGH- to-LOW. Capacitance Symbol Parameter TA = +25°C Units VCC = 5.0V C L = 50 pF T A = −40°C to +85°C 18 Outputs V CC = 5.0V ± 0.5V Switching C L = 250 pF (Note 14) (Note 5) Min Typ Max Min Max tPLH , Propagation Delay 3.0 11.0 4.0 13.0 ns tPHL Data to Output 3.0 11.0 4.0 15.0 tPZH , Output Enable Time 2.5 11.5 (Note 16) ns tPZL 2.5 14.0 tPHZ , Output Disable Time 2.0 11.5 (Note 17) ns tPLZ 2.0 11.5 tOSHL Pin to Pin Skew 0.5 1.0 1.0 ns (Note 18) HL Data to Output tOSLH Pin to Pin Skew 0.5 1.0 1.0 ns (Note 18) LH Data to Output Symbol Parameter Typ Units Conditions C IN Input Pin Capacitance 4.0 pF V CC = 5.0V C OUT Output Pin Capacitance 13.0 pF V CC = 5.0V C PD Power Dissipation Capacitance 34.0 pF V CC = 5.0V

11 www.fairchildsemi.com SCAN18541T Non-Inverting Line Driver with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted 56-Lead Shrink Small Outline Package (SSOP), JEDEC MO-118, 0.300 Wide Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com