SC9535 FAIRVIEW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- Operating Frequency of 6 GHz Max.
- Good VSWR of 1.35:1
- Gold Plated Brass Contact
- 30 µin minimum contact plating
Applications
- General Purpose Test • Custom Cable Assemblies
Description
RA MMCX Plug Standard Connector Crimp/Solder Attachment for 0.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A and LMR- 100A-FR Cable, part number SC9535, from Fairview Microwave is in-stock and ships same day. This MMCX plug connector operates up to a maximum frequency of 6 GHz and offers good VSWR of 1.35:1. Its right angle body geometry facilitates connections in tight spaces. Fairview's RA MMCX plug connector SC9535 datasheet specifications and outline drawing are shown in this PDF below. Our extensive offering of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like. From providing an I/O for a board design to creating a custom cable assembly configuration, Fairview Microwave has a connector solution to meet your needs. Fairview Microwave also has the expertise to build your custom cable assemblies for you and ship them same-day. Electrical Specifications Description Minimum Typical Maximum Units Frequency Range DC 6 GHz VSWR 1.35:1 Operating Voltage (AC) 250 Vrms Impedance 50 Ohms Mechanical Specifications Size Length 0.311 in [7.9 mm] Width 0.138 in [3.51 mm] Height 0.276 in [7.01 mm] Weight 0.0075 lbs [3.4 g] Material Specifications Description Material Plating Contact Brass Gold 30 µin minimum Insulation PTFE Body Brass Gold 3 µin minimum
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Right Angle MMCX Plug (Male) Connector for 0.100 inch, RG316, RG174, RG188, LMR-100, LMR- 100A, LMR-100A-FR Cable, Crimp/Solder SC9535 Environmental Specifications Temperature Operating Range -55 to +155 deg C Compliance Certifications (see product page for current document) Plotted and Other Data Notes: Right Angle MMCX Plug (Male) Connector for 0.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100A-FR Cable, Crimp/ Solder from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: Right Angle MMCX Plug (Male) Connector for 0.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100A-FR Cable, Crimp/Solder SC9535 URL: https://www.fairviewmicrowave.com/mmcx-plug-standard-rg316-rg174-connector-sc9535-p.aspx The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.
+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Website: www.FairviewMicrowave.com 3FKR5 TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY .126 3.2 .157 .276 FERRULE .276 .035 0.9 .120 3.05 RECOMMENDED STRIPPING DIMENSIONS .31 7.9 .16 .14 3.5 .28 .067 1.7 .106 2.7 INSULATOR CAP ASSEMBLY PROCEDURE: STRIP CABLE AS SHOWN. SLIDE FERRULE OVER CABLE.1. INSTALL CABLE INTO BODY OF CONNECTOR AND 2. SOLDER CENTER CONDUCTOR IN PLACE. CRIMP FERRULE, INSERT INSULATOR AND PRESS CAP 3. INTO PLACE. CRIMP SIZE REQUIRED: FERRULE: .128 [5.34] HEX CRIMP TOOL. REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED C ECO-12648 09/25/2023 AKRESOWSKI SRAUTUS ITEM NO.
1 OF 1
A DRAWN BY SC9535 C FM DS Rev-D4 Asize MMCX PLUG RIGHT ANGLE CONNECTOR CRIMP/SOLDER ATTACHMENT FOR RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0.100 INCH AKRESOWSKI THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. SHEETSCALE NONE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 A A B B C C D D E E F F SC9535 CAD Drawing Right Angle MMCX Plug (Male) Connector for 0.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100A-FR Cable, Crimp/Solder