SC-7000Z DEN-ONINSTRUMENTS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Gun Type with Versatile Function Designed For Lead Free ¡ Time required to reach the max vacuum The SC-7000Z has a quick and sharp suction power which is most important for the solder removal. 100 300 500 (mSEC) (kpa) SC-7000Z Station type Suction capacity and hot blow system are further powered up. Removal of chip, SMD components,SMT solder residue clean up is done with more ease and more efficiency. POINTS Time required to reach the max vacuum The SC-7000Z has a quick and sharp suction power which is most important for the solder removal. 100 300 500 (mSEC) (kpa) SC-7000Z Station type POINTS SC-7000Z DESOLDERING TOOL DEN-ON INSTRUMENTS CO.,LTD or d ESD SAFEA ESD SAFEA Dic SC-7000Z is of the pump built in structure with a temperature control circuit. Best tool recognized all over the world. ¡ Direct connection between the diaphragm pump and the tip can provide high vacuum efficiency which can accommodate for 8-12 layesred PCB. ¡ The Combination of a 100W ceramic heater with sensor feed- back temperature control circuit and high vacuum capacity can provide best work efficiency with no faillure. ¡ Protection against ESD is secured. ¡ Quite compact, light-weight unit is portable and ready to use at any location. ¡ Low noise and low vibration ¡ The removal of SMD components can be easily done by a flick of the selector lever and by replacing the tip with the hot blow nozzle. The patented filter cartlidge will last a long life. Most of the removed solder and flux is accumulated as shownn the dotted line so that the filter can be kept clean for longer time. Dispensable with low cost.@@
Gun Type multi function desoldering tool gDesigned to remove SMD/SMT Componentsh ¡ Removing solder of DIP by the suction tip¡ Removal Chip IC using the hot blow mode Specification AC100VE120VE230V@50/60Hz 120W Diaphragm Tip 12W |86Kpa 0.1sec 15k/min 100W (Ceramic) Feedback zero cross over type More than 100M¶ 400 420g Voltage Power Consumption Pump Motor Output Vacuum Attained Time required max vacuum Air flow rateiOPENj Heater Control System Temp. range Insulation resistance Max. Temp. of hot blow Weight Filter Cartridge inclusive (5 pcs/set) @ Ref. No: i70-08-00j PH-400 Combination Option for a better use Spot Pre-heater to help fast and efficacy cleaning. ST-800 iTool standj @ Ref. No: i08-00-00j Fore convenient and safe work. Optional Tip L 10 φd Certificated P roductor Specification
0.8 Std
0.8 SLIM
0.8 U.SLIM
1.0 Std
1.5 Std
1.0 SLIM
1.5 SLIM
Ref. No: 50-01-11 50-01-12 50-01-13 50-01-14 50-01-15 50-01-16 50-01-17 Marking 0.8 0.8S 1.0 1.5 10S 15S Ód 0.8 0.8 0.8 1.0 1.5 1.0 1.5 ÓD1 2.5 2.0 1.5 2.5 3.0 2.0 2.2 ÓD2 7.0 6.0 5.0 7.0 7.0 6.0 6.0 Lmm 12.5 14.0 11.5 12.5 12.5 14.0 14.0 ¦ Tip Ref.No:50-01-14 is fitted in the main body. Hot blow nozzle Ref. No:72-78-01 Hot blow filter pipe Ref. No:72-78-02 SMT Filter Cartridge (Glass made) @ Ref. No: i70-08-20j Kit for hot air iHot air nozzle, Hot air filter pipej @ Ref. No: i72-78-10j SC-7000Z SC-7000Z SC-7000Z DESOLDERING TOOL ¦ Pre-heater combined use is advised OPTION ST-800 iTool standj ¦ Specification and prices are subject to change without notice. Specification revision date: June 2009 EXPORTER DIC TRADING CO.,LTD 1-26-10 SEKIMACHI-HIGASHI, NERIMA,TOKYO 177-0052,JAPAN TEL [81]3-3929-6800 FAX [81]3-3929-7441 MANUFACTURER DEN-ON INSTRUMENTS CO.,LTD http://www.denondic.co.jp rework@denondic.co.jp