SC70-6 ZETEX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Issue 2 - March 2007 1 www.zetex.com © Zetex Semiconductors plc 2007 Surface mounted, 6 pin package Package outline Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches Nominal weight Nominal weight per device 6.78mg. Tape and reel information Dim. Millimeters Inches Dim. Millimeters Inches D 2.00 BSC 0.0787 BSC /H9251 0° 8° 0° 8° Orientation Tape width (mm) Reel size (inches) No. of components Tape option indicator 8 7 3,000 TA 8 13 10,000 TC /H9251
Issue 2 - March 2007 2 www.zetex.com © Zetex Semiconductors plc 2007 Embossed carrier tape configuration Figure 1 - rotational and lateral movement Dimensions mm (inches) Tape size (mm) 8 1 21 62 4 A0, B0, K0 See note* NOTES: * A0, B0 and K0 dimensions are determined with respect to EIA/JEDEC rotational and lateral movement requirements (see fig. 1). See note* See note* See note* F 3.50 ± 0.10 (0.138 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 7.50 ± 0.10 (0.295 ± 0.004) 11.50 ± 0.10 (0.453 ± 0.004) P 4.00 ±0.10 (0.157 ± 0.004) 4.00 ±0.10 (0.157 ± 0.004) 8.00 ±0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 8.00 ±0.10 (0.315 ± 0.004) 12.00 ± 0.10 (0.472 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) to 20.00 ± 0.10 (0.787 ± 0.004) in 4.00 (0.157) increments (0.472 ± 0.012) DK t P Center lines of cavity 10 pitches culmulative tolerance on tape ±0.2mm (±0.008”) User direction of feed Embossment Top cover tape K0B1 See Note 1 See Note 1 See Note 1 WF E 20° maximum 0.5mm maximum 0.5mm maximum Sketch A (top view) Component lateral movement Component cavity center line 20° maximum Component center line Sketch C (top view) Component rotation - top view Sketch B (side or front sectional view) Component rotation - side view
Issue 2 - March 2007 3 www.zetex.com © Zetex Semiconductors plc 2007 This publication is issued to provide outline information only whic h (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contact or be regarded as a representation relating to the products or services concerned. The company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service. Reel configuration Tape option A max. B min. C D min. N min. (0.512 - 0.52) Tape size G T max. Full radius Tape slot in core for tape start. 2.5mm min. width, 10mm min. depth G T N CDA B