C63-10 WILLOW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

© 2004 TELEDYNE RELAYS (800) 284-7007 • www.teledynerelays.com C63 Page 1 2DSC63-10 Rev -- 1.0A, 60 Vdc Optically Isolated Short-Circuit Protected FEATURES/BENEFITS

  • Short-circuit protected: Prevents damage to system components, assemblies and system wiring
  • Optical isolation: Isolates control circuits from load transients and eliminates ground loops and signal ground noise
  • Low off-state leakage
  • Switches high currents: To 1.0 Amp
  • High noise immunity: Control signals isolated from switching noise
  • High dielectric strength: For safety and for protection of control and signal level circuits

DESCRIPTION

The C63-10 solid-state relay utilizes a power FET switch that is protected against short circuits and overload currents. The short-circuit protection feature provides protection when a short or overload occurs while the relay is on as well as when the relay is switched into an overload. In either case, the relay will sense the overload condition and then block it indefinitely until the overload is removed and the unit is reset by cycling the input control. Using the C63-10 to switch power sources and loads prevents damage to system assemblies and system wiring. The power FET output offers low “ON” resistance and can switch loads in either the high or the low side of the power line. The C63-10 is packaged in a 6-pin DIP package. Part Number Description C63-10 1A, 60 Vdc short-circuit protected solid-state relay for through-hole mounting SC63-10 1A, 60 Vdc short-circuit protected solid-state relay for surface mount ELECTRICAL SPECIFICATIONS (–40°C to +85°C ambient temperature unless otherwise specified) INPUT (CONTROL) SPECIFICATIONS Min Max Units Input Current 8 20 mA Input Voltage @ 10 mA 2 3 Vdc Must Turn-On 8 mA Must Turn-Off Current 100 µA Must Turn-Off Voltage 0.8 Vdc Reverse Polarity –6 Vdc C63-10 Series OUTPUT (LOAD) SPECIFICATIONS Min Max Units Load Voltage Range 0 60 Vdc Output Current Rating (See Figure 4) 1.0 A Leakage Current at Rated Voltage 10 µA Transient Blocking Voltage @25°C 100 Vdc Output Capacitance @25Vdc (25°C) 600 pF Output Voltage Drop @1A 0.55 Vdc On Resistance 0.55 Ohm Turn-On Time 2.0 ms Turn-Off Time 1.0 ms Trip Overload (See Figure 7) A