SC56-21SRWA KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
0.56 INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. EASY MOUNTING ON P.C.BOARDS OR SOCKETS. I.C. COMPATIBLE. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. STANDARD : GRAY FACE, WHITE SEGMENT. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SC56 -21SRWA SUPER BRIGHT RED
Description
The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode.
SPEC NO: DSAA5247 REV NO: V.5 DATE: APR/23/2005 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: B.H.LI ERP: 1301001137 Selection Guid eSelection Guid e Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 5mm below package base. Part No. Dice Lens Type Iv (ucd) @ 10mA Min. Typ. SC56 -21SRWA SUPER BRIGHT RED (GaAIAs) WHITE DIFFUSED 4700 24000 Common Cathode, Rt. Hand Decimal Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Super Bright Red 660 nm IF=20mA λD Dominant Wavelength Super Bright Red 640 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Parameter Super Bright Red Units Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 5 Seconds
SPEC NO: DSAA5247 REV NO: V.5 DATE: APR/23/2005 PAGE: 3 OF 3 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: B.H.LI ERP: 1301001137 Super Bright Red SC56 -21SRWA Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters.