DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Precision, solid state temperature sensor
- Epoxy filled sleeve for controlled diameter
- Interchangeability down to ±0.18°F (±0.10°C)
- Suitable for use over the range of -40°F to 302°F (–40°C to 150°C
- High sensitivity greater than –4%/°C at 77°F (25°C)
- Most popular Resistance (R) vs Temperature (T) curves are availablee
- Suitable for temperature measurement , control and compensation
- Ideal for medical applications
- Fully insulated
- Sleeved for good mechanical strength and resistance to solvents
- 0.008 in (0.2 mm) diameter heavy isomid insulated bifilar copper lead wires for SC50
- 0.004 in (0.1 mm) diameter heavy isomid insulated bifilar nickel lead wires for SC30 Amphenol Advanced Sensors
NTC Interchangeable Type SC30 Sleeved interchangeable chip thermistors with heavy isomid insulated nickel lead-wires. Options Consult Factory for Availability of Options
- Other resistance values in the range of 1000 Ω to 100 kΩ
- Other tolerances or ranges
- Alternative lead wires or lengths
- Non standard R vs T curves
- Controlled dimensions Thermal and Electrical Properties Dissipation Constant Still air: 0.4 mW/°C Stirred oil: 3 mW/°C Thermal Time Constant Still air: 5 seconds Stirred oil: 0.3 seconds Maximum Power at 77°F (25°C) ~30 mW De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)
Ordering Information
Select appropriate part number below for resistance and temperature tolerance desired. R25°C Material System ±0.18°F (±0.1°C) 32°F to 158°F (0°C to 70°C) ±0.36°F (±0.2°C) 32°F to 158°F (0°C to 70°C)
2252 F SC30F232V SC30F232W
3000 F SC30F302V SC30F302W
5000 F SC30F502V SC30F502W
10000 F SC30F103V SC30F103W
10000 Y SC30Y103V SC30Y103W
30000 H SC30H303V SC30H303W
50000 G SC30G503V SC30Y503W
100000 Y SC30Y104V SC30Y104W
100000 G SC30G104V SC30G104W
NTC Interchangeable Type SC30 dimensions Epoxy fillet 38GA, nickel, alloy Bifilar leads Ø 0.030 in (0.76 mm) maximum 1.5 in (38 mm) minimum Length from 0.04 to 0.12 in (1 to 3 mm) depending on resistance of thermistor Polyimide sleeve
NTC Interchangeable Type SC50 Sleeved interchangeable chip thermistors with heavy isomid insulated copper lead wires. Options Consult Factory for Availability of Options.
- Other resistance values in the range of 1000 Ω to 100 kΩ
- Other tolerances or ranges
- Alternative lead wires or lengths
- Non standard R vs T curves
- Controlled dimensions Thermal and Electrical Properties Dissipation Constant Still air: 0.5 mW/°C Stirred oil: 0.4 mW/°C Thermal Time Constant Still air: 8 seconds Stirred oil: 0.5 seconds Maximum Power at 77°F (25°C) ~50 mW De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)
Select appropriate part number below for resistance and temperature tolerance desired. R25°C Material System ±0.18°F (±0.1°C) 32°F to 158°F (0°C to 70°C) ±0.36°F (±0.2°C) 32°F to 158°F (0°C to 70°C)
2252 F SC50F232V SC50F232W
3000 F SC50F302V SC50F302W
5000 F SC50F502V SC50F502W
10000 F SC50F103V SC50F103W
10000 Y SC50Y103V SC50Y103W
30000 H SC50H303V SC50H303W
50000 G SC50G503V SC50Y503W
100000 Y SC50Y104V SC50Y104W
100000 G SC50G104V SC50G104W
NTC Interchangeable Type SC30 dimensions Epoxy fillet 32GA, copper Bifilar leads Ø 0.050 in (1.5 mm) maximum 1.5 in (38 mm) minimum Length from 0.04 to 0.12 in (1 to 3 mm) depending on resistance of thermistor Polyimide sleeve
www.amphenol-sensors.com © 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. Amphenol Advanced Sensors