SC40-18CGKWA KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: rd15f15
- PDF pages: 7
Technical content
Features
z Large size. z 4.0 inch digit height. z Low current operation. z Excellent character appearance. z High light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant.
Description
The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAM8469 REV NO: V.2A DATE: MAR/30/2015 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301001371 Selection Guide Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Description Min. Typ. Green (AlGaInP) White Diffused 31000 100000 Common Cathode, Rt. Hand Decimal. *14000 *30000 SC40-18CGKWA Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Green 574 nm I F=20mA λD [1] Dominant Wavelength Green 570 nm I F=20mA Δλ1/2 Spectral Line Half-width Green 20 nm I F=20mA C Capacitance Green 15 pF V F=0V;f=1MHz VF [2] Forward Voltage (DP) Green 8.4 (4.2) 10.0 (5.0) V I F=20mA IR Reverse Current (Per Chip) Green 10 uA V R=5V Parameter Green Units Power dissipation (Per Chip) 75 mW DC Forward Current (DP) (30) mA Peak Forward Current [1] (DP) 300 (150) mA Reverse Voltage (Per Chip) 5 V Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAM8469 REV NO: V.2A DATE: MAR/30/2015 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301001371 Green SC40-18CGKWA
SPEC NO: DSAM8469 REV NO: V.2A DATE: MAR/30/2015 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301001371
SPEC NO: DSAM8469 REV NO: V.2A DATE: MAR/30/2015 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301001371 PACKING & LABEL SPECIFICATIONS SC40-18CGKWA Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAM8469 REV NO: V.2A DATE: MAR/30/2015 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301001371
SPEC NO: DSAM8469 REV NO: V.2A DATE: MAR/30/2015 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1301001371