SBU31 DBLECTRO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
30W Open frame Switching Power Supplies For I.T.E. Description: The SBU31 series of products,open frame constructed, AC/DC switching mode power supplies provide 30 Watts of continuous output power. They are suited for use in portable equipments and many other applications. All models meet CISPR-22 class B emission Limits and are designed to comply with new CE requirements. All units are 100% burned in and tested. Wide Operating Voltage 90 to 264 VAC,47 to 63 Hz Input connector mates with Molex housing 09-50-3031 and Molex 2478 series crimp terminal Output connector mates with Molex housing 09-50-3041 and Molex 2478 series crimp terminal Single Output Input Surge Current, Over Voltage and Over Load protection Class I 2 year warranty Safety Approvals: Features: CBProduct Safety BAUART GEPRUFT TYPE APPROVED Electrical Characteristics: Environmental : Toper Operating Temperature Tstg Storage Temperature 0 70 -40 Sym. Parameter Min. Typ. Max. UnitTest Conditions C C Hr Ho Storage Humidity 75 % %Operating Humidity Pd 95 0 Derate linearly from 100% load at 40 C to 50% load at 70 C Hrs MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1M Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Safety Approvals Input Voltage Range 100 240 VAC Operate Voltage Range 90 264 VAC fin Input Frequency 47 63 Hz Po Output Power Range Vin=90 to 264VAC 0 30 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 0.8 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.5 A Irl Low Line Inrush Current Io=Full load, 25c, Cool start, Vin=115VAC 12 15 A Irh High Line Inrush Current Io=Full load, 25c, Cool start, Vin=230VAC 26 35 A Eff Efficiency Io=Full Load, Vin=230VAC 78 84 88 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 3 5 % OVP Over Voltage Protection 112 132 % OCP Over Current Protection 110 150 % Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 12 mS Ts Start Up Time Io=Full Load, Vin=100VAC 2 S Vp-p Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 0.5 1 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.4 0.75 mA TC Temperature Coefficient All output -0.04 0.04 %/c Pno No-Load Power Consumption No load, Vin=240VAC 0.3 W
30W Open Frame Switching Power Supplies For I.T.E. Mechanical Specifications: : Safety Specifications: Output Voltage And Current Rating Chart ( Single Output ) : Note: 1. Dimensions are shown in mm. 2. Weight: 85gs approx. 3. Input connector mates with Molex housing 09-50-3031 and Molex 2478 series crimp terminal Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ris CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC VDC B CLASS Dielectric Withstanding Voltage for Primary to Ground EMI requirements for FCC PART-15 Model Number Output Voltage Output Current Total Regulation Maximum Output Power SBU31-102 05 ~ 06 VDC 4.00 ~ 3.33 A 5% 20W SBU31-103 06 ~ 08 VDC 3.83 ~ 2.87 A 5% 23W SBU31-104 8 ~ 11 VDC 3.38 ~ 2.45 A 5% 27W SBU31-105 11 ~ 13 VDC 2.73 ~ 2.30 A 5% 30W SBU31-106 13 ~ 16 VDC 2.30 ~ 1.88 A 5% 30W SBU31-107 16 ~ 21 VDC 1.88 ~ 1.43 A 5% 30W SBU31-108 21 ~ 27 VDC 1.43 ~ 1.11 A 3% 30W SBU31-109 27 ~ 33 VDC 1.11 ~ 0.91 A 3% 30W SBU31-110 33 ~ 40 VDC 0.91 ~ 0.75 A 3% 30W SBU31-111 40 ~ 48 VDC 0.75 ~ 0.62 A 3% 30W PIN CHART MODEL PIN SBU31-1XX 1 2 3 4 OUT RTNOUT RTN N L