SBU16A DBLECTRO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
15W Desk Top Switching Power Supplies For I.T.E. The SPU16A series of AC/DC switching mode power supplies provide 15 Watts of continuous output power and is well-suited for a variety of applications. All supplies are UL 94V-1 min compliant. All model meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c- nd ndUL(UL 60950-1:2 Edition), TUV/GS(EN 60950-1:2 Edition) and new CE requirements. All units are 100% burned-in and tested. Description: Wide Operating Voltage 90 to 264VAC,47 to 63 Hz IEC-320-C14 Input Inlet Optional Output Connector (See appendix) Single Output Energy Star 2.0, Efficiency level V Class I 2 year warranty Features: Note: The Ripple & Noise which is under 3.3VCD at 2% max Safety Approvals: CB S&E S E PRT Agree to apply for the PSE if order on hand Environmental : Sym. Parameter Min. Typ. Max. UnitTest Conditions Tstg Storage Temperature -40 C Toper Operating Temperature 0 70 40 C Hr Storage Humidity 75 %0 Ho %Operating Humidity 95 0 Pd Derate linearly from 100% load at 40 C to 50% load at 70 C Hrs MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1M Electrical Characteristics: Sym. Vin fin Po Vo Io Iil Iih Irl Irh Eff OVP OCP Ttr Thold Ts Vp-p Ilk Pno TC REG-i REG-o Parameter Test Conditions Min. Typ. Max. Unit Safety Approvals Input Voltage Range Io=Full load, 25°c, Cool start, Vin=115VAC Io=Full load, 25°c, Cool start, Vin=230VAC Operate Voltage Range Input Frequency Output Power Range Output Voltage Range Output Current Range Input Current (Low Line) Input Current (High Line) Low Line Inrush Current High Line Inrush Current Efficiency Line Regulation Load Regulation Over Voltage Protection Over Current Protection Time of Transient Response Hold-Up Time Start Up Time Ripple & Noise (Peak to Peak) Safety Ground Leakage Current Temperature Coefficient No-Load Power Consumption No load, Vin=240VAC All output Io=Full Load, Vin=240VAC Io=Full Load, Vin=110VAC Io=Full Load, Vin=100VAC Full Load, Vin=90VAC Io=Full Load to Half Load, Vin=100VAC Nil.But,Output protected to short circut conditions Io=Full Load, Vin=230VAC Io=Full Load Vin=230VAC Nil Io=Full load, Vin=115VAC Io=Full load, Vin=230VAC See rating chart See rating chart Vin=90 to 264VAC 100 0.5 0.5 0.5 0.4 0.5 0.3 1 2 240 264 0.4 0.26 0.75 VAC VAC Hz W V A A A A A ms ms mA W S -0.04 0.04 %/ C°
15W Desk Top Switching Power Supplies For I.T.E. Safety Specifications: Note: 1. Dimensions are shown in mm. 2. Weight: 165gs approx. 3. Optional output connector: See page Appendix. Mechanical Specifications : Output Voltage And Current Rating Chart ( Single Output ) : Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ris CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC VDC B CLASS Dielectric Withstanding Voltage for Primary to Ground EMI requirements for FCC PART-15 SPU16A- had been approved by 101 CEC level IV. SPU16A- had been approved by 102~111 CEC level V. Model Number Output Voltage Output Current Total Regulation Maximum Output Power SPU16A-101 03 ~ 05 VDC 2.50 A max 7% 12W SPU16A-102 05 ~ 06 VDC 2.50 ~ 2.00 A 5% 12W SPU16A-103 06 ~ 08 VDC 2.00 ~ 1.50 A 5% 12W SPU16A-104 08 ~ 11 VDC 1.87 ~ 1.36 A 5% 15W SPU16A-105 11 ~ 13 VDC 1.36 ~ 1.15 A 5% 15W SPU16A-106 13 ~ 16 VDC 1.15 ~ 0.94 A 5% 15W SPU16A-107 16 ~ 21 VDC 0.94 ~ 0.72 A 5% 15W SPU16A-108 21 ~ 27 VDC 0.72 ~ 0.55 A 5% 15W SPU16A-109 27 ~ 33 VDC 0.55 ~ 0.45 A 5% 15W SPU16A-110 33 ~ 40 VDC 0.45 ~ 0.37 A 3% 15W SPU16A-111 40 ~ 48 VDC 0.37 ~ 0.31 A 3% 15W Mark “ ” means approved by PSE.