SBU151 MPSIND | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
150W Open Frame Switching Power Supplies For I.T.E. The SBU151 series of compact, open frame constructed, AC/DC switching mode power supplies provide 150 Watts of continuous output power. They are suited for use in based systems, portable equipments and many other applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with nd ndUL/c-UL(UL 60950-1:2 Edition) ,TUV/Bauart(EN 60950-1:2 Edition) and new CE requirements. All units are 100% burned in and tested. Safety Approvals : CB Description: Wide Operating Voltage 90 to 260 VAC,47 to 63 Hz Internal EMI filter Single Output Input connector mates with Molex housing 09-50-3031 and Molex 2478 series crimp terminal Output connector mates with Molex housing09-50-3131 and Molex 2478 series crimp terminal Input Surge Current and Over Load protection Over Voltage Protection (Crowbar Design) Active Power Factor Correction Power Fail Detect(Optional) Class I Synchronous Rectification 2 year warranty Features: BAUART TYPE APPROVED GEPRUFT Electrical Characteristics: Iil 2.0 Irh Eff REG-i REG-o OVP OCP Ttr Thold Ts 0.3 1 2 Vp-p Ilk Iih 0.8 Irl 0.5 1 TC -0.04 0.04 Vin=90 to 260 VAC Io=Full load, Vin=115VAC Vin=230VAC W V A A A A A Output Power Range Efficiency Line Regulation Load Regulation Over Voltage Protection Time of Transient Response Hold-Up Time Safety Ground Leakage Current Temperature Coefficient S mA mS 63 47 See rating Chart 48 54 58 63 0.750.5 0.5 Low Line Inrush Current Hz fin Po Vo Io 150 908885 132 150 110 112 High Line Inrush Current PF Input Frequency Power Factor Correction Output Voltage Range Output Current Range Input Current (Low Line) Input Current (High Line) Io=Full load, Vin=90~260VAC 0.95 0.97 1.0 Io=Full load, Vin=230VAC Io=Full load, 25 C,Cool start, Vin=115VAC Io=Full load, 25 C,Cool start, Vin=230VAC Io=Full load, Vin=110VAC Io=Full load Over Current Protection Io=Full load to Half Load, Vin=100VAC Start Up Time Io=Full load, Vin=100VAC Ripple & Noise (Peak to Peak) Full load, Vin=90VAC 1 % Io=Full load, Vin=240VAC See rating Chart mS16 %/ C Io=Full load, Vin=230VAC All output Sym. Parameter Test Conditions Min. Typ. Max. Unit Safety Approvals Input Voltage Range Vin 260 90
240 VAC100
Environmental : Sym. Parameter Min. Typ. Max. UnitTest Conditions Tstg Storage Temperature -40 C Toper Operating Temperature 0 70 50 C Hr Storage Humidity 75 %0 Ho %Operating Humidity 95 0 Pd Derate linearly from 100% load at 50 C to 50% load at 70 C Hrs MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1M
Mechanical Specifications : Note: 1. Dimensions are shown in inches or mm . 2. Weight: 390gs approx. 3. Input connector mates with Molex housing 09-50-3031 and Molex 2478 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal. Output Voltage And Current Rating Chart (Single Output) : Model Number Output Voltage Output Current Total Regulation SBU151-104 9 VDC 16.0 A 5% 144W SBU151-105 12 VDC 12.5 A 5% 150W SBU151-106 15 VDC 10.0 A 5% 150W SBU151-107 18 VDC 8.33 A 4% 150W SBU151-108 24 VDC 6.25 A 3% 150W SBU151-109 30 VDC 5.00 A 2% 150W SBU151-110 36 VDC 4.17 A 2% 150W SBU151-111 48 VDC 3.13 A 2% 150W Output Power Maximum SBU151 SERIES SBU151-1XX OUT OUT OUT OUT OUT OUT RTN RTN RTN RTN RTN RTN PFD 1 2 3 4 5 6 7 8 9 10 11 12 13(Optional) PIN MODEL PIN CHART Safety Specifications: Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ris CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC VDC B CLASS Dielectric Withstanding Voltage for Primary to Ground EMI requirements for FCC PART-15 150W Open Frame Switching Power Supplies For I.T.E.