SBNH-1D65B COMMSCOPE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

4-port sector antenna, 2x 698-896 and 2x 1710-2360 MHz, 65° HPBW, 2x RET lInterleaved dipole technology providing for attractive, low wind load mechanical packageInterleaved dipole technology providing for attractive, low wind load mechanical package OBSOLETE This product was discontinued on: December 31, 2017 Replaced By SBNHHSBNHH--1D65B1D65B 66--port sector antenna, 2x 698port sector antenna, 2x 698––896 and 4x 1695896 and 4x 1695––2360 MHz, 65° HPBW, 2x RET. Both high bands share 2360 MHz, 65° HPBW, 2x RET. Both high bands share the same electrical tilt.the same electrical tilt. Electrical Specifications Frequency Band, MHz 698–806 806–896 1710–1880 1850–1990 1920–2200 2300–2360 Beamwidth, Horizontal, degreesBeamwidth, Horizontal, degrees6868 6666 7070 6565 6262 5959 Beam Tilt, degreesBeam Tilt, degrees 00––1414 00––1414 00––77 00––77 00––77 00––77 USLS (First Lobe), dBUSLS (First Lobe), dB 1717 1616 1515 1414 1616 1515 FrontFront--toto--Back Ratio at 180°, dBBack Ratio at 180°, dB 2929 3232 3131 2828 3030 3131 Isolation, Cross Polarization, dBIsolation, Cross Polarization, dB2525 2525 2525 2525 2525 2525 Isolation, InterIsolation, Inter--band, dBband, dB 3030 3030 3030 3030 3030 3030 PIM, 3rd Order, 2 x 20 W, dBcPIM, 3rd Order, 2 x 20 W, dBc--153153 --153153 --153153 --153153 --153153 --153153 Input Power per Port, maximum, Input Power per Port, maximum, wattswatts 350350 350350 350350 350350 350350 300300 Polarization Polarization ±±45°45° ±±45°45° ±±45°45° ±±45°45° ±±45°45° ±±45°45° Impedance Impedance 50 ohm50 ohm 50 ohm50 ohm 50 ohm50 ohm 50 ohm50 ohm 50 ohm50 ohm 50 ohm50 ohm Electrical Specifications, BASTA* Frequency Band, MHz 698–806 806–896 1710–1880 1850–1990 1920–2200 2300–2360 Gain by all Beam Tilts Tolerance, Gain by all Beam Tilts Tolerance, Gain by Beam Tilt, average, dBiGain by Beam Tilt, average, dBi 0 ° | 14.6 7 ° | 14.6 14 ° | 14.2 0 ° | 14.3 7 ° | 14.3 14 ° | 13.6 0 ° | 17.5 3 ° | 17.5 7 ° | 17.4 0 ° | 17.8 3 ° | 18.0 7 ° | 17.9 0 ° | 18.0 3 ° | 18.3 7 ° | 18.2 0 ° | 18.0 3 ° | 18.4 7 ° | 18.4 Beamwidth, Horizontal Tolerance, Beamwidth, Horizontal Tolerance, Beamwidth, Vertical Tolerance, Beamwidth, Vertical Tolerance, USLS, beampeak to 20° above USLS, beampeak to 20° above beampeak, dB beampeak, dB 1717 1616 1515 1414 1515 1414 FrontFront--toto--Back Total Power at 180° Back Total Power at 180° ±± 30°, dB 30°, dB 2525 2525 2828 2525 2525 2626 SBNH-1D65B page 1 of 4 June 2, 2019

  • CommScope* CommScope® ® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the download the whitepaper Time to Raise the Bar on BSAs.whitepaper Time to Raise the Bar on BSAs. CPR at Boresight, dB CPR at Boresight, dB 2121 2222 1919 2020 1919 2323 CPR at Sector, dB CPR at Sector, dB 1313 1111 1616 1313 1313 44 Array Layout SBNH-1D65B page 2 of 4 June 2, 2019

Operating Frequency Band 1710 – 2360 MHz | 698 – 896 MHz Antenna Type Sector Band Multiband Performance Note Outdoor usage Mechanical Specifications RF Connector Quantity, total 4 RF Connector Quantity, low band 2 RF Connector Quantity, high band 2 RF Connector Interface 7-16 DIN Female Color Light gray Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket Radiator Material Aluminum | Low loss circuit board Radome Material Fiberglass, UV resistant Reflector Material Aluminum RF Connector Location Bottom Wind Loading, frontal 618.0 N @ 150 km/h 138.9 lbf @ 150 km/h Wind Loading, lateral 197.0 N @ 150 km/h 44.3 lbf @ 150 km/h Wind Speed, maximum 241 km/h | 150 mph Dimensions Length 1848.0 mm | 72.8 in Width 301.0 mm | 11.9 in Depth 181.0 mm | 7.1 in Net Weight, without mounting kit 18.4 kg | 40.6 lb Remote Electrical Tilt (RET) Information Input Voltage 10–30 Vdc Internal RET High band (1) | Low band (1) Power Consumption, idle state, maximum 2 W Power Consumption, normal conditions, maximum 13 W Protocol 3GPP/AISG 2.0 (Multi-RET) RET Interface 8-pin DIN Female | 8-pin DIN Male RET Interface, quantity 1 female | 1 male SBNH-1D65B page 3 of 4 June 2, 2019

Regulatory Compliance/Certifications * Footnotes Packed Dimensions Length 1970.0 mm | 77.6 in Width 409.0 mm | 16.1 in Depth 299.0 mm | 11.8 in Shipping Weight 31.0 kg | 68.3 lb Agency Classification RoHS 2011/65/EU Compliant by Exemption ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system China RoHS SJ/T 11364-2014 Above Maximum Concentration Value (MCV) Included Products bracket set and one bottom bracket set.bracket set and one bottom bracket set. Performance Note Severe environmental conditions may degrade optimum performance SBNH-1D65B page 4 of 4 June 2, 2019