SBLF1640CT VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- Plastic package has Underwriters Laboratory Flammability Classification 94V-0
- Dual rectifier construction, positive center tap
- Metal silicon junction, majority carrier conduction
- Low power loss, high efficiency
- Guardring for overvoltage protection
- For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications
- High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case
SBL16xxCT, SBLF16xxCT & SBLB16xxCTSeries Vishay Semiconductors formerly General Semiconductor www.vishay.com Document Number 88727 2 11-Feb-02 Maximum Ratings (TC = 25°C unless otherwise noted) Parameter Symbol SBL1630CT SBL1640CT Unit Maximum repetitive peak reverse voltage V RRM 30 40 V Working peak reverse voltage V RWM 21 28 V Maximum DC blocking voltage V DC 30 40 V Maximum average forward rectified currentTotal device 16 at TC = 95°C Per leg IF(AV) 8.0 A Peak forward surge current 8.3ms single half sine-wave superimposed I FSM 250 A on rated load (JEDEC Method) per leg Operating junction and storage temperature range T J, TSTG –40 to +125 °C RMS Isolation voltage (SBLF type only) from terminals 4500 (NOTE 1) to heatsink with t = 1.0 second, RH ≤ 30% V ISOL 3500 (NOTE 2) V 1500 (NOTE 3) Electrical Characteristics(TC = 25°C unless otherwise noted) Parameter Symbol Value Unit Maximum instantaneous forward voltage per leg at 8.0 A (Note 4) VF 0.55 V Maximum instantaneous reverse current TC = 25°C 0.5 at rated DC blocking voltage per leg (Note 4)TC = 100°C IR 50 mA Thermal Characteristics(TC = 25°C unless otherwise noted) Parameter Symbol MBR MBRF MBRB Unit Typical thermal resistance from junction to case per leg RΘ JC 2.0 4.0 2.0 °C/W Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset (2) Clip mounting (on case), where leads do overlap heatsink (3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”) (4) Pulse test: 300µs pulse width, 1% duty cycle
SBL16xxCT, SBLF16xxCT & SBLB16xxCTSeries Vishay Semiconductors formerly General Semiconductor Document Number 88727 www.vishay.com 11-Feb-02 3 Ratings and Characteristic Curves(TA = 25°C unless otherwise noted) IF – Instantaneous Forward Current (A) IR – Instantaneous Reverse Current (mA) Typical Reverse Characteristics Per Leg 1.0 0.1 0.01 Forward Current Derating Curve 0 50 100 150 Average Forward Current (A) Peak Forward Surge Current (A) Number of Cycles at 60 HZ Maximum Non-Repetitive Peak Forward Surge Current Per Leg 150 100 250 200 300 11 0 100 TJ = TJ max. 8.3ms Single Half Sine-Wave (JEDEC Method) Case Temperature (°C) Typical Instantaneous Forward Characteristics Per Leg 1.0 0.01 0.001 0.1 TJ = 125°C 75°C 25°C Resistive or Inductive Load Transient Thermal Impedance (°C/W) 0.01 11 0 100 100 0.1 0.1 t – Pulse Duration (sec.) TJ = 25°C TJ = 125°C Typical Junction Capacitance Per Leg pF – Junction Capacitance 11 0 100 1,000 4,000 100 0.1 Reverse Voltage (V) TJ = 25°C f = 1.0 MHZ Vsig = 50mVp-p Instantaneous Forward Voltage (V) Pulse Width = 300µs 1% Duty Cycle 0 20 100 40 60 80 Typical Transient Thermal Impedance Per Leg Percent of Rated Peak Reverse Voltage (%)