SBL3040CTP
Document overview
- Manufacturer or author: Diodes Incorporated
- PDF pages: 4
Technical content
Features
Low Forward Voltage Drop Soft, Fast Switching Capability Schottky Barrier Chip ITO-220S Heat Sink Tab Electrically Isolated from Cathode UL Approval in Accordance with UL 1557, Reference No. E94661 Mechanical Data Case: ITO-220S Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 1.335 grams (approximate) Ordering Information (Notes 1 & 2) Part Number Case Packaging SBL3040CTP ITO-220S 50 pieces/tube SBL3040CTP-G ITO-220S 50 pieces/tube Notes: 1. For packaging details, go to our website at http://www.diodes.com. 2. For Green Molding compound version part number, add “-G” suffix to part number. Example: SBL3040CTP-G. Marking Information Package Pin Out Configuration Top View Anode Common Cathode Anode Isolated Bottom View SBL3040CTP = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 08 = 2008) WW = Week (01 - 53) 3 0 4 0 C T P Y Y W W AB S B L PART OBSOLETE - NO ALTERNATE PART
Document number: DS31462 Rev. 7 - 4 2 of 4 www.diodes.com October 2015 © Diodes Incorporated SBL3040CTP OBSOLETE – PART DISCONTINUED Maximum Ratings (Per Leg) @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VRM 40 V Average Rectified Output Current (Per Leg) IO 15 A (Total) 30 Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 230 A Isolation Voltage From Terminal Heatsink t = 1 min. VAC 2000 V Thermal Characteristics (Per Leg) Characteristic Symbol Value Unit Typical Thermal Resistance Junction to Case RJC 3 C/W Operating and Storage Temperature Range TJ, TSTG -65 to +150 ºC Electrical Characteristics (Per Leg) @TA = 25°C unless otherwise specified Characteristic Symbol Min Typ Max Unit Test Condition Forward Voltage Drop VF - - 0.60 V IF = 15A, TJ = 25ºC Leakage Current (Note 3) IR - 0.15 1 mA VR = 40V, TJ = 25ºC - - 75 VR = 40V, TJ = 100ºC Note: 3. Short duration pulse test used to minimize self-heating effect. 0.01 0.1 100 0 200 400 600 800 Fig. 1 Typical Forward Characteristics V , INSTANTANEOUS FORWARD VOLTAGE (mV)F I , INSTANTANEOUS FORWARD CURRENT (A)F T = 25°CA T = -55°CA T = 85°CA T = 125°CA T = 150°CA 100 1,000 10,000 100,000 1,000,000 0 10 20 30 40 I , INSTANTANEOUS REVERSE CURRENT (µA)R Fig. 2 Typical Reverse Characteristics V , INSTANTANEOUS REVERSE VOLTAGE (V)R T = 25°CA T = 85°CA T = 125°CA T = 150°CA
Document number: DS31462 Rev. 7 - 4 3 of 4 www.diodes.com October 2015 © Diodes Incorporated SBL3040CTP OBSOLETE – PART DISCONTINUED I , AVERAGE FORWARD CURRENT (A)F(AV) 25 50 75 100 125 150 175 Fig. 3 Forward Current Derating Curve T , AMBIENT TEMPERATURE (°C)A R = R Total Device JA JC R = 13°C/W Per Element JA Package Outline Dimensions ITO-220S DIM. MIN. MAX. TYP. A 4.52 4.62 4.57 A1 0.51 1.39 A2 2.57 2.77 2.67 b 0.72 0.95 0.84 b2 1.15 1.54 1.26 c 0.356 0.61 D 14.22 16.51 15.00 D1 8.60 8.80 8.70 D2 13.68 14.08 e 2.49 2.59 2.54 e1 4.98 5.18 5.08 E 10.01 10.21 10.11 E1 6.86 8.89 H1 5.85 6.85 L 13.30 13.90 13.60 L1 4.00 P 3.54 4.08 Q 2.54 3.42 All Dimensions in mm E L be A D
7 Ref
5 Ref
E15 Ref c e1 Q ØP
1.7 Ref
5 Ref5 Ref
Ø1.5 Dp 0.1 max
Document number: DS31462 Rev. 7 - 4 4 of 4 www.diodes.com October 2015 © Diodes Incorporated SBL3040CTP OBSOLETE – PART DISCONTINUED IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMP LIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability a rising out of the application or use of this document or any product described herein; neither does Diodes Incorp orated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such appli cations shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorne y fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pendi ng. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version o f this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or system s without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform wh en properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety -critical, life support devices or systems, notwithstanding any devices - or systems -related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorpora ted and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com